A stack light and audible alarm alert you when packages, products, and parts are too heavy or too light. Also known as check weighers, these scales verify quality and consistency in packing, parts machining, and other activities. Set your weight range, and the stack light tells you if an object is OK to go using three colored lights: one for too heavy, one for too light, and one for just right. Specific measurements appear on a bright, backlit LCD.

The scale's memory stores up to 10 weight ranges, so you can switch from one range to another as your tasks change. In counting mode, the scale tallies the total number of parts based on the weight of a single part. When using a container to hold small items, press the tare button to reset the scale to zero. To print or transfer data to a computer, connect an RS-232 computer cord (not included) to the scale's DB9 port.

NTEP approved for use with materials sold by weight, these scales count parts in addition to weighing material. The counting function can be turned off for use as a weigh-only scale. Scales have a 9-pin RS-232 serial port to connect to your PC with a data cord (sold separately). The tare function lets you reset the scale to zero after placing a container on the platform.

Check for quality and consistency among packages, parts, and other objects in areas that are frequently washed down. These scales are IP and NEMA rated, so they seal out water and dust. Also known as check weighers, they alert you when items are outside of a set weight range. The stack light uses three colored lights: one for too heavy, one for too light, and one for when items are good to go. An audible alarm also signals when items are outside your weight standard. Exact measurements appear on a bright, backlit LCD display. Mount the display to the included column to position it where it’s easiest to see.

Press the tare button to reset these scales to zero when using a container to hold small items.

Count and weigh loads that are difficult to lift. The weighing function is NTEP approved for use with products sold by weight. Scales have a tare function that lets you reset the scale to zero after placing a container on the platform. Scales operate on the included AC adapter or batteries (not included).

Ten times more accurate than standard bench-top scales, these scales are extremely precise. They’re NTEP approved for measuring materials sold by weight. Use the scale’s counting mode to keep a tally of your measurements as you add or remove items to the scale. Operate the scale wirelessly—they run on a rechargeable battery. Or use the included adapter to plug them into an outlet and run them constantly. To print or transfer your data to a computer, connect an RS-232 computer cord (not included).

These scales are NTEP approved as legal for trade and have an IP69K rated load cell for use in washdown environments. They withstand exposure to dust and moisture, including the frequent high-pressure, high-temperature washdowns commonly used in outdoor industrial environments, food processing facilities, and chemical plants. Plus, the scale-to-display junction box meets NEMA 4X standards for protection against washdowns and corrosion.

Also known as platform scales, these have a low profile so you only need to lift heavy objects 3" off the ground. Their stainless steel construction and a ribbed structural underside give them the necessary support to weigh thousands of pounds at a time. To keep items in place, a diamond tread on the platform provides slip resistance. The load cells in these scales are FM approved, so they’ve been tested for quality and safety by Factory Mutual.

Subtract the weight of a container with the tare function to weigh only the material inside. Use the counting mode to keep a running tally of how many items are on the scale.

Mount the remote display at a distance on a workstation, column, or wall—the connecting cable is 22 feet long. The backlit display features 1"-tall digits for easy reading.

Ramps—Install ramps to slide or wheel heavy loads onto scales. If you install two ramps, they must be on opposite ends.

Eliminate an extra lift—these lift tables weigh and count right from the lifting platform. They have a built-in scale, so they’re useful for inventory and shipping tasks. A check-weigh mode flags when an item falls outside your set weight range. In counting mode, these tables track inventory as you add and remove parts. A large digital display shows your measurements. Use the foot lever and hydraulic pump to raise loads to your ideal height. And turn the knob for controlled lowering.

Warning: Never use to lift people.

To quickly check inventory, roll these dollies wherever you need them to weigh and count the contents of drums. Their built-in scale measures weight and has an accurate piece-count mode—even while adding or removing contents from your drum. Dollies have three sensors for reliable readings on uneven floors. For loading heavy drums, they have a low-profile platform. The scale has a rechargeable battery with a USB charging cable.