Hammer the pin through the center to assemble these links. They’re also known as hammer locks and sling links.

The flat side lets webbing and strapping lay flat, so they don’t slide and bunch.

Also known as master and sling links, a large inner diameter provides room to attach multiple connectors or legs on a sling.

Providing better load distribution and alignment than single oblong links, these reduce wear in three and four leg slings.

Also known as quick links, these links thread closed by hand or with a wrench.

Use for three-sided connections. Flat sides ensure webbing and strapping lay flat, so they won't slide and bunch.

The twisted shape of these links prevents loads from rotating or knotting.

Often used with transport chain, these links are good for binding, tying down, and pulling loads.

Restrict rope and chain movement with the narrow end, attach multiple connectors to the wide end, and then hammer these links closed.

Drive the end through the eye using a ball peen hammer and then weld or flatten the extended end to close. These links are also known as cold shuts.

The flat side allows you to connect webbing and strapping, so they lay flat and resist bunching.

Limit rope and chain movement with the narrow end of these links and attach multiple connectors to the wide end.

Cotter pins secure each end of these shackles for temporary installations.

Indentations in the shackle body hold the head of the pin in place once fastened.

Since they close with a screw pin, these shackles are quick to install and remove by hand, but should only be used in low-vibration environments where they’ll remain stationary. Their narrow opening restricts the movement of wire rope and chain.

Indentations in the shackle body hold the head of the pin in place once fastened.

The pin doesn’t stick out from their body, so these shackles won’t snag or accidentally come undone. They have a narrow opening that restricts the movement of wire rope and chain.

The twisted shape of these shackles keeps rope and chain from twisting and knotting. And if their screw becomes loose, the lip on the shackles prevents it from falling out.

Minimize twisting and knotting of rope and chain.

A lip on the shackle keeps the screw from falling out when loosened.

Since their pin doesn’t stick out from their body, these shackles won’t snag or accidentally come undone. They have a twisted shape to prevent rope and chain from twisting and knotting.

A bolt fastened with a nut and cotter pin makes these shackles more secure than screw-pin shackles.

A bolt fastened with a nut and cotter pin makes these shackles more secure than screw-pin shackles.

The strongest shackles we offer, these connectors have a pin with flush ends that prevents snagging and accidental disengagement.

One end has a bolt fastened with a nut and cotter pin for a more secure connection than flush-pin connectors.

A bolt fastened with a nut and cotter pin makes these shackles more secure than screw-pin shackles.

Pull the collar to release the shackle from its locked position.

Attach a rope to the ring on the pin for remote release where access in limited. These shackles have an eye end for connecting to a hook.