About Shaft Couplings
More
About Shaft Collars
Shaft collars are useful for holding and positioning components on a shaft. They can also serve as mechanical stops and stroke limiters.
More
Two-Piece Shaft Coupling Bridges
When your shafts are not close enough to use standard couplings, these have the length to bridge the gap. Install them anywhere on a shaft without removing components or having access to the ends of the shaft. Tighten the clamping screws to secure. Good for high-torque applications, rigid couplings connect two shafts that are aligned, allowing for no relative movement between the shafts.
For technical drawings and 3-D models, click on a part number.
| For Shaft Dia. | Overall Lg. | OD | Max. Speed, rpm | Max. Torque, in.-lbs. | For Motion Type | Each | |
Cast Iron | |||||||
|---|---|---|---|---|---|---|---|
For Keyed Shafts | |||||||
| 2 3/4" | 10 7/8" | 7 1/4" | 2,830 | 21,000 | Forward/Reverse, Start/Stop, Continuous | 0000000 | 000000000 |
Clamping Shaft Collars
These metal collars are stronger than plastic shaft collars. They clamp evenly around the shaft to create a strong, mar-free hold. To use, slide onto your shaft and tighten the clamping screw to secure.
Black-oxide steel collars have some corrosion resistance. Zinc-plated steel collars have moderate corrosion resistance. Aluminum collars are lightweight and have good corrosion resistance. 303 stainless steel collars have excellent corrosion resistance.
For technical drawings and 3-D models, click on a part number.
Clamping Screw | ||||||
|---|---|---|---|---|---|---|
| For Shaft Dia. | OD | Wd. | Type | No. Included | Each | |
Black-Oxide 1215 Carbon Steel | ||||||
| 2 3/4" | 4" | 7/8" | Socket Head Screw | 1 | 00000000 | 000000 |
Zinc-Plated 1215 Carbon Steel | ||||||
| 2 3/4" | 4" | 7/8" | Socket Head Screw | 1 | 0000000 | 000000 |
2024 Aluminum | ||||||
| 2 3/4" | 4" | 7/8" | Socket Head Screw | 1 | 0000000 | 00000 |
303 Stainless Steel  | ||||||
| 2 3/4" | 4" | 7/8" | Socket Head Screw | 1 | 00000000 | 000000 |
Extra-Grip Clamping Shaft Collars
With larger clamping screws than those found on standard clamping collars, these provide a stronger grip on your shaft without using additional screws. They clamp evenly around the shaft to create a strong, mar-free hold. To use, slide onto your shaft and tighten the clamping screw to secure. Collars are black-oxide steel, which offers some corrosion resistance.
For technical drawings and 3-D models, click on a part number.
Clamping Screw | Black-Oxide 1026 Carbon Steel | |||||
|---|---|---|---|---|---|---|
| For Shaft Dia. | OD | Wd. | Type | No. Included | Each | |
| 2 3/4" | 4 1/2" | 1" | Socket Head Screw | 1 | 0000000 | 000000 |
Quick-Release Clamping Shaft Collars
Installing and removing a collar is as easy as pushing down and lifting up a clamp lever. Collars clamp evenly around the shaft to create a strong, mar-free hold. All have a clamping screw to adjust lever tension. Made of anodized aluminum, they are lightweight with good corrosion resistance.
For technical drawings and 3-D models, click on a part number.
Clamping Screw | Black Anodized 6061 Aluminum | |||||
|---|---|---|---|---|---|---|
| For Shaft Dia. | OD | Wd. | Type | No. Included | Each | |
| 2 3/4" | 4 3/4" | 3/4" | Socket Head Screw | 1 | 00000000 | 0000000 |
Set Screw Shaft Collars
Keep these shaft collars in place by tightening their set screw into the shaft. The tip of the screw digs in for a secure hold, but will mar the shaft’s surface. For maximum holding power, make sure the set screw material is harder than your shaft material. Use these shaft collars to position and retain power transmission components such as sprockets, pulleys, and bearings. You can also use them to limit the movement of a shaft.
Carbon steel collars are strong and wear resistant. Collars with a black-oxide finish have some corrosion resistance, but only in dry environments. Their dark color can be useful for matching other parts in your system. Collars with a zinc-plated finish have an outer layer of zinc that protects the steel from rust and extends the life of the collar. 303 stainless steel collars are corrosion resistant and highly machinable.
Aluminum collars are lightweight and have good corrosion resistance.
For technical drawings and 3-D models, click on a part number.
Washdown Set Screw Shaft Collars
Made of chemical-resistant nylon, these collars are suitable for washdown applications. Slide them onto an unhardened shaft and tighten the set screw, which bites into the shaft to hold it.
For technical drawings and 3-D models, click on a part number.
Set Screw | ||||||
|---|---|---|---|---|---|---|
| For Shaft Dia. | OD | Wd. | Type | No. Included | Each | |
White Nylon Plastic | ||||||
| 2 3/4" | 3 3/4" | 1" | Hex Socket | 1 | 00000000 | 0000000 |
Clamping Two-Piece Shaft Collars
These metal collars are stronger than plastic shaft collars. The two-piece design allows you to install them anywhere on a shaft without removing components or having access to the ends of the shaft. Collars clamp evenly around the shaft to create a strong, mar-free hold. Tighten the clamping screws to secure.
Black-oxide steel collars have some corrosion resistance. Zinc-plated steel and chrome-plated steel collars have moderate corrosion resistance with a bright finish. Aluminum collars are lightweight and have good corrosion resistance. 303 stainless steel collars have excellent corrosion resistance. 316 stainless steel collars have excellent corrosion and chemical resistance.
For technical drawings and 3-D models, click on a part number.
Clamping Screw | ||||||
|---|---|---|---|---|---|---|
| For Shaft Dia. | OD | Wd. | Type | No. Included | Each | |
Black-Oxide 1026 Carbon Steel | ||||||
| 2 3/4" | 4" | 7/8" | Socket Head Screw | 2 | 0000000 | 000000 |
Zinc-Plated 1215 Carbon Steel | ||||||
| 2 3/4" | 4" | 7/8" | Socket Head Screw | 2 | 0000000 | 00000 |
Chrome-Plated 1215 Carbon Steel | ||||||
| 2 3/4" | 4" | 7/8" | Socket Head Screw | 2 | 0000000 | 00000 |
2024 Aluminum | ||||||
| 2 3/4" | 4" | 7/8" | Socket Head Screw | 2 | 00000000 | 00000 |
303 Stainless Steel | ||||||
| 2 3/4" | 4" | 7/8" | Socket Head Screw | 2 | 00000000 | 000000 |
316 Stainless Steel | ||||||
| 2 3/4" | 4" | 7/8" | Socket Head Screw | 2 | 0000000 | 000000 |
Washdown Clamping Two-Piece Shaft Collars
Suitable for use in washdown applications, these plastic collars also offer good chemical resistance. The two-piece design allows you to install them anywhere on a shaft without removing components or having access to the ends of the shaft. Collars clamp evenly around the shaft to create a strong, mar-free hold. Tighten the clamping screws to secure.
Acetal collars have a naturally slippery surface and resist swelling when exposed to moisture.
For technical drawings and 3-D models, click on a part number.
Extra-Grip Clamping Two-Piece Shaft Collars
With larger screws than those found on standard clamping collars, these provide a stronger grip on your shaft without using additional screws. The two-piece design allows you to install them anywhere on a shaft without removing components or having access to the ends of the shaft. Collars clamp evenly around the shaft to create a strong, mar-free hold. Tighten the clamping screws to secure.
Black-oxide steel collars offer some corrosion resistance.
For technical drawings and 3-D models, click on a part number.
Clamping Screw | ||||||
|---|---|---|---|---|---|---|
| For Shaft Dia. | OD | Wd. | Type | Number Included | Each | |
Black-Oxide 1026 Carbon Steel | ||||||
| 2 3/4" | 4 1/2" | 1" | Socket Head Screw | 2 | 0000000 | 0000000 |
Set Screw Two-Piece Shaft Collars
Tighten the set screw to bite into an unhardened shaft for a secure hold. The two-piece design allows you to install these collars anywhere on a shaft without removing components or having access to the ends of the shaft. Clamping screws provide extra grip.
Carbon steel collars are strong and wear resistant. Their black-oxide finish is somewhat corrosion resistant, but only in dry environments. Their dark color can be useful for matching other parts in your system.
For technical drawings and 3-D models, click on a part number.
Set Screw | Clamping Screw | |||||||
|---|---|---|---|---|---|---|---|---|
| For Shaft Dia. | OD | Wd. | Type | No. Included | Type | No. Included | Each | |
Black-Oxide 1215 Carbon Steel | ||||||||
| 2 3/4" | 4" | 7/8" | Hex Socket | 1 | Socket Head Screw | 2 | 0000000 | 000000 |