McMaster-Carr logo
    Filter by
    System of Measurement
    Pipe Schedule
    Industrial Info Compare
    Connects To
    Pressure Class
    Industrial Info Compare
    Flanged Connection Surface
    DFARS Specialty Metals
    U.S.–Mexico–Canada Agreement (USMCA) Qualifying
    Export Control Classification Number (ECCN)
    Industrial Info Snippet
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    91 Products
    About Pipe and Fittings
    industrial info icon

    Measure your pipe and fittings to identify their pipe size, thread size, schedule, and thread type. Then, find compatible components.

    Standard-Wall Plastic Pipe Fittings for Water

    Connect these fittings to Schedule 40 plastic pipe–they are the industry standard for residential and commercial low-pressure plumbing and water supply applications. They are plastic for good corrosion resistance.
    To prevent leaks in threaded connections, apply a sealant to the male threads. Threaded connections can be taken apart as needed for maintenance and repair. For metal threads, use PTFE tape. For plastic threads, apply a non-hardening, plastic-compatible sealant. Tape or sealants with PTFE are not recommended for plastic-to-plastic connections. When making a threaded connection be careful not to overtighten the threads. To prevent cracks and leaks, finger tighten the fitting, then wrench-tighten one to two turns.
    Warning: Never use plastic pipe fittings, flanges, and pipe with compressed air or gas.
    Note: For fittings that are not rated for pressure, you can use the pressure rating of the plastic pipe as a reference. Threaded fittings are limited to 50% of the rated pressure of the pipe.
    Straight Connectors
    Image of Product. Female. Front orientation. Pipe and Fittings. Standard-Wall Plastic Pipe Fittings for Water, Straight Connectors, Cement Socket Female.

    Female

    Cement-Socket Fitting Connection—Attach socket-connect ends to unthreaded pipe or another socket-connect fitting with a PVC primer and cement (also known as solvent weld).
    NSF/ANSI 61—To adhere to safety standards for drinking water systems, use pipe that meets NSF/ANSI 61.
    Pipe
    Size
    Pipe
    Schedule
    Material
    Color
    Max. Pressure
    @ Temp.
    Food Industry
    Std.
    Each
    Cement Socket Female
    12
    		40
    		PVCWhiteNot RatedNSF/ANSI 61
    		4880K2870000000
     
    Bushing Straight Reducing Adapters
    Image of Product. Cement Socket Male × Cement Socket Female. Front orientation. Contains Annotated. Pipe and Fittings. Standard-Wall Plastic Pipe Fittings for Water, Bushing Straight Reducing Adapters, Cement Socket Male × Cement Socket Female, Round Body.

    Cement Socket Male ×

    Cement Socket Female

    Cement-Socket Fitting Connection—Attach socket-connect ends to unthreaded pipe or another socket-connect fitting with a PVC primer and cement (also known as solvent weld).
    NSF/ANSI 61—To adhere to safety standards for drinking water systems, use pipe that meets NSF/ANSI 61.
    Pipe
    Size
    (A)
    (B)
    Pipe
    Schedule
    Body
    Shape
    Material
    Color
    Max. Pressure
    @ Temp.
    Food Industry
    Std.
    Each
    Cement Socket Male × Cement Socket Female
    12
    		10
    		40
    		RoundPVCWhiteNot RatedNSF/ANSI 61
    		4880K0750000000
     
    Straight Reducers
    Image of Product. Female × Female. Front orientation. Contains Annotated. Pipe and Fittings. Standard-Wall Plastic Pipe Fittings for Water, Straight Reducers, Cement Socket Female × Cement Socket Female.

    Female × Female

    Cement-Socket Fitting Connection—Attach socket-connect ends to unthreaded pipe or another socket-connect fitting with a PVC primer and cement (also known as solvent weld).
    NSF/ANSI 61—To adhere to safety standards for drinking water systems, use pipe that meets NSF/ANSI 61.
    Pipe
    Size
    (A)
    (B)
    Pipe
    Schedule
    Material
    Color
    Max. Pressure
    @ Temp.
    Food Industry
    Std.
    Each
    Cement Socket Female × Cement Socket Female
    12
    		8
    		40
    		PVCWhiteNot RatedNSF/ANSI 61
    		4880K0270000000
    12
    		10
    		40
    		PVCWhiteNot RatedNSF/ANSI 61
    		4880K028000000
     
    Short 90° Elbow Connectors
    Cement-Socket Fitting Connection—Attach socket-connect ends to unthreaded pipe or another socket-connect fitting with a PVC primer and cement (also known as solvent weld).
    NSF/ANSI 61—To adhere to safety standards for drinking water systems, use pipe that meets NSF/ANSI 61.
    Pipe
    Size
    Pipe
    Schedule
    Material
    Color
    Max. Pressure
    @ Temp.
    Food Industry
    Std.
    Each
    Cement Socket Female
    12
    		40
    		PVCWhiteNot RatedNSF/ANSI 61
    		4880K2830000000
     
    Tee Connectors
    Image of Product. Female. Front orientation. Pipe and Fittings. Standard-Wall Plastic Pipe Fittings for Water, Tee Connectors, Cement Socket Female.

    Female

    Cement-Socket Fitting Connection—Attach socket-connect ends to unthreaded pipe or another socket-connect fitting with a PVC primer and cement (also known as solvent weld).
    NSF/ANSI 61—To adhere to safety standards for drinking water systems, use pipe that meets NSF/ANSI 61.
    Pipe
    Size
    Pipe
    Schedule
    Material
    Color
    Max. Pressure
    @ Temp.
    Food Industry
    Std.
    Each
    Cement Socket Female
    12
    		40
    		PVCWhiteNot RatedNSF/ANSI 61
    		4880K2850000000
     
    Caps
    Image of Product. Cement Socket Female. Front orientation. Pipe and Fittings. Standard-Wall Plastic Pipe Fittings for Water, Caps, Cement Socket Female.

    Cement Socket

    Female

    Cement-Socket Fitting Connection—Attach socket-connect ends to unthreaded pipe or another socket-connect fitting with a PVC primer and cement (also known as solvent weld).
    NSF/ANSI 61—To adhere to safety standards for drinking water systems, use pipe that meets NSF/ANSI 61.
    Pipe
    Size
    Pipe
    Schedule
    Material
    Color
    Max. Pressure
    @ Temp.
    Food Industry
    Std.
    Each
    Cement Socket Female
    12
    		40
    		PVCWhiteNot RatedNSF/ANSI 61
    		4880K2990000000
     

    Thick-Wall Plastic Pipe Fittings for Water

    Connect these fittings to Schedule 80 pipe. With thicker, stronger walls than standard-wall fittings, they can handle heavy duty supply applications, such as water processing, wastewater treatment, and irrigation. Fittings are plastic for good corrosion resistance. They meet ASTM specifications and testing requirements for material quality.
    To prevent leaks in threaded connections, apply a sealant to the male threads. Threaded connections can be taken apart as needed for maintenance and repair. For metal threads, use PTFE tape. For plastic threads, apply a non-hardening, plastic-compatible sealant. Tape or sealants with PTFE are not recommended for plastic-to-plastic connections. When making a threaded connection be careful not to overtighten the threads. To prevent cracks and leaks, finger tighten the fitting, then wrench-tighten one to two turns.
    Warning: Never use plastic pipe fittings, flanges, and pipe with compressed air or gas.
    Note: For fittings that are not rated for pressure, you can use the pressure rating of the plastic pipe as a reference. Threaded fittings are limited to 50% of the rated pressure of the pipe.
    Straight Connectors
    Image of Product. Cement Socket Female. Front orientation. Pipe and Fittings. Thick-Wall Plastic Pipe Fittings for Water, Straight Connectors, Cement Socket Female, Round Body.

    Cement Socket

    Female

    Cement-Socket Fitting Connection—Attach socket-connect ends to unthreaded pipe or another socket-connect fitting with a PVC primer and cement (also known as solvent weld).
    NSF/ANSI 61—To adhere to safety standards for drinking water systems, use pipe that meets NSF/ANSI 61.
    Pipe
    Size
    Pipe
    Schedule
    Body
    Shape
    Material
    Color
    Max. Pressure
    @ Temp.
    Food Industry
    Std.
    Each
    Cement Socket Female
    12
    		80
    		RoundPVCDark GrayNot RatedNSF/ANSI 61
    		4881K0160000000
     
    Bushing Straight Reducing Adapters
    Image of Product. Cement Socket Male × Cement Socket Female. Front orientation. Contains Annotated. Pipe and Fittings. Thick-Wall Plastic Pipe Fittings for Water, Bushing Straight Reducing Adapters, Cement Socket Male × Cement Socket Female, Hex Body.

    Cement Socket Male

    × Cement Socket

    Female

    Cement-Socket Fitting Connection—Attach socket-connect ends to unthreaded pipe or another socket-connect fitting with a PVC primer and cement (also known as solvent weld).
    NSF/ANSI 61—To adhere to safety standards for drinking water systems, use pipe that meets NSF/ANSI 61.
    Pipe
    Size
    (A)
    (B)
    Pipe
    Schedule
    Body
    Shape
    Material
    Color
    Max. Pressure
    @ Temp.
    Food Industry
    Std.
    Each
    Cement Socket Male × Cement Socket Female
    12
    		8
    		80
    		HexPVCDark GrayNot RatedNSF/ANSI 61
    		4881K4140000000
    12
    		10
    		80
    		HexPVCDark GrayNot RatedNSF/ANSI 61
    		4881K415000000
     
    Straight Reducers
    Image of Product. Cement Socket Female × Cement Socket Female. Front orientation. Contains Annotated. Pipe and Fittings. Thick-Wall Plastic Pipe Fittings for Water, Straight Reducers, Cement Socket Female × Cement Socket Female.

    Cement Socket Female ×

    Cement Socket Female

    Cement-Socket Fitting Connection—Attach socket-connect ends to unthreaded pipe or another socket-connect fitting with a PVC primer and cement (also known as solvent weld).
    NSF/ANSI 61—To adhere to safety standards for drinking water systems, use pipe that meets NSF/ANSI 61.
    Pipe
    Size
    (A)
    (B)
    Pipe
    Schedule
    Material
    Color
    Max. Pressure
    @ Temp.
    Food Industry
    Std.
    Each
    Cement Socket Female × Cement Socket Female
    12
    		8
    		80
    		PVCDark GrayNot RatedNSF/ANSI 61
    		4881K068000000000
    12
    		10
    		80
    		PVCDark GrayNot RatedNSF/ANSI 61
    		4881K069000000
     
    Short 90° Elbow Connectors
    Image of Product. Cement Socket Female. Front orientation. Pipe and Fittings. Thick-Wall Plastic Pipe Fittings for Water, Short 90° Elbow Connectors, Cement Socket Female.

    Cement Socket

    Female

    Cement-Socket Fitting Connection—Attach socket-connect ends to unthreaded pipe or another socket-connect fitting with a PVC primer and cement (also known as solvent weld).
    NSF/ANSI 61—To adhere to safety standards for drinking water systems, use pipe that meets NSF/ANSI 61.
    Pipe
    Size
    Pipe
    Schedule
    Material
    Color
    Max. Pressure
    @ Temp.
    Food Industry
    Std.
    Each
    Cement Socket Female
    12
    		80
    		PVCDark GrayNot RatedNSF/ANSI 61
    		4881K012000000000
     
    Tee Connectors
    Image of Product. Cement Socket Female. Front orientation. Pipe and Fittings. Thick-Wall Plastic Pipe Fittings for Water, Tee Connectors, Cement Socket Female.

    Cement Socket Female

    Cement-Socket Fitting Connection—Attach socket-connect ends to unthreaded pipe or another socket-connect fitting with a PVC primer and cement (also known as solvent weld).
    NSF/ANSI 61—To adhere to safety standards for drinking water systems, use pipe that meets NSF/ANSI 61.
    Pipe
    Size
    Pipe
    Schedule
    Material
    Color
    Max. Pressure
    @ Temp.
    Food Industry
    Std.
    Each
    Cement Socket Female
    12
    		80
    		PVCDark GrayNot RatedNSF/ANSI 61
    		4881K014000000000
     
    Caps
    Image of Product. Cement Socket Female. Front orientation. Pipe and Fittings. Thick-Wall Plastic Pipe Fittings for Water, Caps, Cement Socket Female.

    Cement Socket

    Female

    Cement-Socket Fitting Connection—Attach socket-connect ends to unthreaded pipe or another socket-connect fitting with a PVC primer and cement (also known as solvent weld).
    NSF/ANSI 61—To adhere to safety standards for drinking water systems, use pipe that meets NSF/ANSI 61.
    Pipe
    Size
    Pipe
    Schedule
    Material
    Color
    Max. Pressure
    @ Temp.
    Food Industry
    Std.
    Each
    Cement Socket Female
    12
    		80
    		PVCDark GrayNot RatedNSF/ANSI 61
    		4881K0180000000
     

    Drain, Waste, and Vent Iron and Steel Pipe Fittings

    Use these fittings in gravity-flow applications both above and below ground. They are also known as no-hub pipe fittings and soil pipe fittings. To connect, place the end of the fitting against your pipe or another fitting and connect with a low-pressure clamp-on connector (sold separately). The clamp-on connector is also known as a no-hub coupling. Fittings are for use in noncorrosive environments.
    Clamp Connectors
    Image of Product. Front orientation. Pipe and Fittings. Drain, Waste, and Vent Iron and Steel Pipe Fittings, Clamp Connectors, Clamp On.

    Clamp On

    304 Stainless Steel—Fittings hold up in humid, damp, and washdown environments but will corrode if exposed to salt water or chemicals.
    For Pipe
    Size
    Material
    Max. Pressure
    @ Temp.
    Sleeve
    Material
    Each
    Clamp On
    12
    		304 Stainless Steel15 psi @ 72° FNeoprene
    		6820K2220000000
     

    Drain, Waste, and Vent PVC Clamp-On Pipe Fittings for Water

    To make installing and maintaining systems easy, these connectors come with clamps that form a strong seal on pipe and fittings once tightened.
    Warning: Never use plastic pipe fittings, flanges, and pipe with compressed air or gas.
    Straight Connectors
    Image of Product. Pipe End × Pipe End. Front orientation. Pipe and Fittings. Drain, Waste, and Vent PVC Clamp-On Pipe Fittings for Water, Straight Connectors, Clamp-On Female for Pipe Ends × Clamp-On Female for Pipe Ends.
    Image of Product. Pipe End × Pipe End—300 Series Stainless Steel Sleeve. Front orientation. Pipe and Fittings. Drain, Waste, and Vent PVC Clamp-On Pipe Fittings for Water, Straight Connectors, Clamp-On Female for Pipe Ends × Clamp-On Female for Pipe Ends.

    Pipe End × Pipe End

    Pipe End × Pipe End—300

    Series Stainless Steel

    Sleeve

    For Pipe
    Size
    For Pipe
    OD
    Material
    Max. Pressure
    @ Temp.
    Clamp Material
    Certification
    Each
    Clamp-On Female for Pipe Ends × Clamp-On Female for Pipe Ends
    12
    		12 3/4"PVC4 psi @ 72° F300 Series Stainless SteelCSA Certified, ICC-ES Listed
    		4511K89000000
    12
    		12 3/4"PVC4 psi @ 72° F316 Stainless SteelCSA Certified, ICC-ES Listed
    		4693K8900000
     
    Straight Reducers
    Image of Product. Pipe End × Pipe End. Front orientation. Contains Annotated. Pipe and Fittings. Drain, Waste, and Vent PVC Clamp-On Pipe Fittings for Water, Straight Reducers, Clamp-On Female for Pipe Ends × Clamp-On Female for Pipe Ends.
    Image of Product. Pipe End × Pipe End—300 Series Stainless Steel Sleeve. Front orientation. Contains Annotated. Pipe and Fittings. Drain, Waste, and Vent PVC Clamp-On Pipe Fittings for Water, Straight Reducers, Clamp-On Female for Pipe Ends × Clamp-On Female for Pipe Ends.

    Pipe End × Pipe End

    Pipe End × Pipe End—300

    Series Stainless Steel Sleeve

    For
    Pipe Size
    (A)
    (B)
    Material
    Max. Pressure
    @ Temp.
    Clamp Material
    Certification
    Each
    Clamp-On Female for Pipe Ends × Clamp-On Female for Pipe Ends
    12
    		10
    		PVC4 psi @ 72° F300 Series Stainless SteelCSA Certified, ICC-ES Listed
    		4511K67000000
     
    Caps
    Image of Product. Front orientation. Pipe and Fittings. Drain, Waste, and Vent PVC Clamp-On Pipe Fittings for Water, Caps, Clamp-On Pipe End.

    Clamp-On Pipe End

    For Pipe
    Size
    For Pipe
    OD
    Material
    Max. Pressure
    @ Temp.
    Clamp Material
    Each
    Clamp-On Pipe End
    12
    		12 3/4"PVC4 psi @ 72° F300 Series Stainless Steel4511K115000000
     

    Clamp-On Pipe Expansion Joints

    Slip these joints over your pipe ends and tighten the band clamps for a secure hold. Joints have a triple-bulb design that provides excellent vibration absorption to reduce stress on your piping system. They also have reinforcing rings for extra support during pressure surges and in vacuum applications.
    Neoprene
    Image of Product. Front orientation. Pipe Expansion Joints. Clamp-On Pipe Expansion Joints.
    Neoprene joints are more abrasion resistant than silicone rubber joints.
    Distance
    For Pipe
    OD
    Pipe
    Size
    Lg.
    Compression
    Expansion
    Offset
    Max. Pressure
    @ Temp.
    Expansion Joint
    Type
    Reinforcement
    Material
    Band Clamp Material
    For Use With
    Temp. Range,
    ° F
    Max. Vacuum
    @ Temp.
    Each
    12 3/4"12
    		7"1"1/2"1 1/8"150 psi @ 72° FTriple BulbNylon
    		300 Series Stainless Steel
    		Sewage Water, Calcium Chloride, Oil, Petroleum, Sludge, Sodium Carbonate (Soda Ash), Water-20 to 22020 in. Hg @ 72° F5428K450000000
    Silicone Rubber
    Image of Product. Front orientation. Pipe Expansion Joints. Clamp-On Pipe Expansion Joints.
    Distance
    For Pipe
    OD
    Pipe
    Size
    Lg.
    Compression
    Expansion
    Offset
    Max. Pressure
    @ Temp.
    Expansion Joint
    Type
    Reinforcement
    Material
    Band Clamp Material
    For Use With
    Temp. Range,
    ° F
    Max. Vacuum
    @ Temp.
    Each
    12 3/4"12
    		7"1"1/2"1 1/8"150 psi @ 72° FTriple BulbFiberglass300 Series Stainless Steel
    		Sewage Water, Calcium Chloride, Oil, Petroleum, Sludge, Sodium Carbonate (Soda Ash), Water-75 to 50020 in. Hg @ 72° F54345K320000000

    Low-Pressure Iron and Steel Unthreaded Pipe Flanges

    Bolt two flat-surface flanges or two raised-surface flanges of the same size together with a gasket (sold separately) to create an access point in a pipe line. Flanges are for use with low-pressure applications in noncorrosive environments.
    Flanges
    Image of System. Stub-End Flange with Straight Adapter: Front. Front orientation. Contains Annotated. Pipe and Fittings. Low-Pressure Iron and Steel Unthreaded Pipe Flanges, Flanges, Stub-End Female, Flat Surface.

    Stub-End Flange with Straight

    Adapter: Front

    Image of Product. Butt Weld: Front. Front orientation. Pipe and Fittings. Low-Pressure Iron and Steel Unthreaded Pipe Flanges, Flanges, Butt Weld, Raised Surface.
    Image of Product. Butt Weld: Raised Surface on Back. Back orientation. Pipe and Fittings. Low-Pressure Iron and Steel Unthreaded Pipe Flanges, Flanges, Butt Weld, Raised Surface.
    Image of Product. Slip-On Weld: Front. Front orientation. Pipe and Fittings. Low-Pressure Iron and Steel Unthreaded Pipe Flanges, Flanges, Slip-On Weld Female, Raised Surface.
    Image of Product. Slip-On Weld: Raised Surface on Back. Back orientation. Pipe and Fittings. Low-Pressure Iron and Steel Unthreaded Pipe Flanges, Flanges, Slip-On Weld Female, Raised Surface.
    Image of Product. Stub End: Flat Surface on Back. Back orientation. Pipe and Fittings. Low-Pressure Iron and Steel Unthreaded Pipe Flanges, Flanges, Stub-End Female, Flat Surface.

    Butt Weld:

    Front

    Butt

    Weld:

    Raised

    Surface

    on Back

    Slip-On

    Weld:

    Front

    Slip-On

    Weld:

    Raised

    Surface

    on Back

    Stub End:

    Flat

    Surface

    on Back

    Butt-Weld Fitting Connection—Butt-weld flanges are also known as weld-neck flanges; the flange neck has a beveled end that, when flush to pipe, creates a trough for a strong weld.
    Slip-on-Weld Fitting Connection—Slip-on weld flanges have no internal stop; slide a pipe through the flange and weld on both sides.
    Stub-End Fitting Connection—Stub-end flanges are also known as lap-joint flanges. Use them with a stub-end straight adapter (not included). The stub-end straight adapter slides into the flange and welds to pipe (not the flange). Since the flange isn’t welded to the pipe, it can be disconnected easily for frequent cleaning and inspecting.
    Pipe
    Size
    Bolt
    Hole
    (A)
    (B)
    Flanged Connection
    Surface (B)
    Flange
    OD
    For Bolt
    Dia.
    Dia.
    No.
    Of
    Bolt Circle
    Dia.
    Pressure
    Class
    Material
    Max. Pressure
    @ Temp.
    Max. Steam Pressure
    @ Temp.
    Each
    Butt Weld
    12
    		12
    		Raised19"7/8"1"1217"150
    		Steel285 psi @ 72° F150 psi @ 300° F68095K580000000
     
    Slip-On Weld Female
    12
    		12
    		Raised19"7/8"1"1217"150
    		Steel285 psi @ 72° F150 psi @ 300° F68095K54000000
     
    Stub-End Female
    12
    		12
    		Flat19"7/8"1"1217"150
    		Steel285 psi @ 72° F150 psi @ 300° F68095K56000000
     
    Blind Flanges
    Image of Product. Front. Front orientation. Pipe and Fittings. Low-Pressure Iron and Steel Unthreaded Pipe Flanges, Blind Flanges, Flanged, Raised.
    Image of Product. Raised Surface on Back. Back orientation. Pipe and Fittings. Low-Pressure Iron and Steel Unthreaded Pipe Flanges, Blind Flanges, Flanged, Raised.

    Front

    Raised

    Surface

    on Back

    Material Certificate Icon
    Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
    Bolt
    Hole
    Pipe
    Size
    Flanged Connection
    Surface
    Flange
    OD
    For Bolt
    Dia.
    Dia.
    No.
    Of
    Bolt Circle
    Dia.
    Pressure
    Class
    Material
    Max. Pressure
    @ Temp.
    Max. Steam Pressure
    @ Temp.
    Each
    Flanged
    12
    		Raised19"7/8"1"1217"150
    		Steel285 psi @ 72° F150 psi @ 300° F68095K610000000
     

    Low-Pressure Pipe Repair Clamps

    Repair pinholes and cracks in low-pressure applications without having to disassemble your system. All clamps are 304 stainless steel for very good corrosion resistance. Choose a clamp that’s long enough to cover your damaged area with at least 1” on both sides.
    Buna-N Gaskets—Partial-Coverage
    Image of Product. Front orientation. Pipe Repair Clamps. Low-Pressure Pipe Repair Clamps, Partial-Coverage Gasket.
    Most Buna-N gaskets work with a variety of media, such as water, oil, and hydraulic fluid.
    Clamps with partial-coverage gaskets, also known as patch clamps, repair pinholes and small cracks. The gasket on these clamps wraps around as much as 40% of the pipe. Unlike clamps with full-coverage gaskets, you'll need to line up the gasket so it completely covers the damaged area.
    NSF/ANSI 61—Clamps that meet NSF/ANSI 61 are safe for use with drinking water systems.
    For Pipe
    OD
    For Pipe
    Size
    Max. Pressure
    @ Temp.
    Max. Vacuum
    @ Temp.
    Material
    Features
    For Use With
    Max. Temp.,
    ° F
    Temp. Range,
    ° F
    Food Industry
    Std.
    For Pipe Material
    Each
    3" Long
    12 3/4"12
    		25 psi @ 72° F15 in. Hg @ 72° F304 Stainless Steel
    		Two-Piece DesignDiesel Fuel, Drinking Water, Hydraulic Fluid, Oil, Water180-20 to 180NSF/ANSI 61
    		Aluminum, Copper, Iron, PVC, Steel4570K154000000
     
    6" Long
    12 3/4"12
    		25 psi @ 72° F15 in. Hg @ 72° F304 Stainless Steel
    		Two-Piece DesignDiesel Fuel, Drinking Water, Hydraulic Fluid, Oil, Water180-20 to 180NSF/ANSI 61
    		Aluminum, Copper, Iron, PVC, Steel4570K164000000
     
    9" Long
    12 3/4"12
    		25 psi @ 72° F15 in. Hg @ 72° F304 Stainless Steel
    		Two-Piece DesignDiesel Fuel, Drinking Water, Hydraulic Fluid, Oil, Water180-20 to 180NSF/ANSI 61
    		Aluminum, Copper, Iron, PVC, Steel4570K66000000
     
    12" Long
    12 3/4"12
    		25 psi @ 72° F15 in. Hg @ 72° F304 Stainless Steel
    		Two-Piece DesignDiesel Fuel, Drinking Water, Hydraulic Fluid, Oil, Water180-20 to 180NSF/ANSI 61
    		Aluminum, Copper, Iron, PVC, Steel4570K86000000
     
    EPDM Gaskets—Partial-Coverage
    Image of Product. Front orientation. Pipe Repair Clamps. Low-Pressure Pipe Repair Clamps, Partial-Coverage Gasket.
    EPDM gaskets can be used with steam and other high-temperature applications.
    Clamps with partial-coverage gaskets, also known as patch clamps, repair pinholes and small cracks. The gasket on these clamps wraps around as much as 40% of the pipe. Unlike clamps with full-coverage gaskets, you'll need to line up the gasket so it completely covers the damaged area.
    NSF/ANSI 61—Clamps that meet NSF/ANSI 61 are safe for use with drinking water systems.
    For Pipe
    OD
    For Pipe
    Size
    Max. Pressure
    @ Temp.
    Max. Steam Pressure
    @ Temp.
    Max. Vacuum
    @ Temp.
    Material
    Features
    For Use With
    Max. Temp.,
    ° F
    Food Industry
    Std.
    For Pipe Material
    Each
    12" Long
    12 3/4"12
    		25 psi @ 72° F25 psi @ 300° F15 in. Hg @ 72° F304 Stainless Steel
    		Two-Piece DesignDrinking Water, Steam, Water300NSF/ANSI 61
    		Aluminum, Copper, Iron, PVC, Steel4570K2550000000
     
    Neoprene Gaskets—Full-Coverage
    Image of Product. Front orientation. Pipe Repair Clamps. Low-Pressure Pipe Repair Clamps, Full-Coverage Gasket.
    Neoprene gaskets work with water as well as air.
    Clamps with full-coverage gaskets repair larger areas than partial-coverage gaskets, such as nearly full-circle breaks. These clamps are easier to install than clamps with partial-coverage gaskets because you don’t need to line up the gasket with the damaged area.
    Zinc-Plated Steel Strip—Those that have a zinc-plated steel strip work like a coupling, fixing even full-circle breaks.
    For Pipe
    OD
    For Pipe
    Size
    Max. Pressure
    @ Temp.
    Max. Vacuum
    @ Temp.
    Material
    Features
    For Use
    With
    Max. Temp.,
    ° F
    Temp. Range,
    ° F
    For Pipe Material
    Each
    8" Long
    12 3/4"12
    		15 psi @ 72° F15 in. Hg @ 72° F304 Stainless Steel
    		Zinc-Plated Steel StripAir, Water180-50 to 180Aluminum, CPVC, Iron, PVC, Stainless Steel, Steel4481K250000000
     
    10" Long
    12 3/4"12
    		15 psi @ 72° F15 in. Hg @ 72° F304 Stainless Steel
    		Zinc-Plated Steel StripAir, Water180-50 to 180Aluminum, CPVC, Iron, PVC, Stainless Steel, Steel4481K826000000
     
    12" Long
    12 3/4"12
    		15 psi @ 72° F15 in. Hg @ 72° F304 Stainless Steel
    		Zinc-Plated Steel StripAir, Water180-50 to 180Aluminum, CPVC, Iron, PVC, Stainless Steel, Steel4481K866000000
     

    High-Pressure Iron and Steel Unthreaded Pipe Flanges

    Forged for extra strength, these heavy duty flanges can withstand high-pressure applications. Bolt two flat-surface flanges or two raised-surface flanges of the same size together with a gasket (sold separately) to create an access point in a pipe line.
    Forged Flanges
    Image of Product. Slip-On Weld (Front). Front orientation. Pipe and Fittings. High-Pressure Iron and Steel Unthreaded Pipe Flanges, Forged Flanges, Slip-On Weld Female, Raised Surface.
    Image of Product. Slip-On Weld (Raised Surface on Back). Front orientation. Pipe and Fittings. High-Pressure Iron and Steel Unthreaded Pipe Flanges, Forged Flanges, Slip-On Weld Female, Raised Surface.

    Slip-On Weld

    (Front)

    Slip-On Weld

    (Raised

    Surface on

    Back)

    Forged flanges have better strength than cast flanges.
    Slip-on-Weld Fitting Connection—Slip-on weld flanges have no internal stop; slide a pipe through the flange and weld on both sides.
    Pipe
    Size
    Bolt
    Hole
    (A)
    (B)
    Flanged Connection
    Surface (B)
    Flange
    OD
    For Bolt
    Dia.
    Dia.
    No.
    Of
    Bolt Circle
    Dia.
    Pressure
    Class
    Material
    Max. Pressure
    @ Temp.
    Max. Steam Pressure
    @ Temp.
    Each
    Slip-On Weld Female
    12
    		12
    		Raised20 1/2"1 1/4"1 1/4"1617 3/4"300
    		Steel600 psi @ 72° F300 psi @ 300° F6806K4140000000
     
    Forged Blind Flanges
    Image of Product. Front. Front orientation. Pipe and Fittings. High-Pressure Iron and Steel Unthreaded Pipe Flanges, Forged Blind Flanges, Flanged, Raised.
    Image of Product. Raised Surface on Back. Back orientation. Pipe and Fittings. High-Pressure Iron and Steel Unthreaded Pipe Flanges, Forged Blind Flanges, Flanged, Raised.

    Front

    Raised

    Surface on

    Back

    Forged flanges have better strength than cast flanges.
    Material Certificate Icon
    Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
    Bolt
    Hole
    Pipe
    Size
    Flanged Connection
    Surface
    Flange
    OD
    For Bolt
    Dia.
    Dia.
    No.
    Of
    Bolt Circle
    Dia.
    Pressure
    Class
    Material
    Max. Pressure
    @ Temp.
    Max. Steam Pressure
    @ Temp.
    Each
    Flanged
    12
    		Raised20 1/2"1 1/4"1 1/4"1617 3/4"300
    		Steel600 psi @ 72° F300 psi @ 300° F6806K4210000000
     

    Low-Pressure Stainless Steel Unthreaded Pipe Flanges

    Bolt two flat-surface flanges or two raised-surface flanges of the same size together with a gasket (sold separately) to create an access point in a pipe line.
    Forged Flanges
    Image of System. Stub End with Straight Adapter (Front). Front orientation. Pipe and Fittings. Low-Pressure Stainless Steel Unthreaded Pipe Flanges, Forged Flanges, Stub End, Flat Surface.

    Stub End with

    Straight Adapter

    (Front)

    Image of Product. Front. Front orientation. Pipe and Fittings. Low-Pressure Stainless Steel Unthreaded Pipe Flanges, Forged Flanges, Butt Weld, Raised Surface.
    Image of Product. Front. Front orientation. Pipe and Fittings. Low-Pressure Stainless Steel Unthreaded Pipe Flanges, Forged Flanges, Slip-On Weld Female, Raised Surface.

    Front

    Front

    Forged flanges have better strength than cast flanges.
    Butt-Weld Fitting Connection—Butt-weld flanges are also known as weld-neck flanges; the flange neck has a beveled end that, when flush to pipe, creates a trough for a strong weld.
    Slip-on-Weld Fitting Connection—Slip-on weld flanges have no internal stop; slide a pipe through the flange and weld on both sides.
    Stub-End Fitting Connection—Stub-end flanges are also known as lap-joint flanges. Use them with a stub-end straight adapter (not included). The stub-end straight adapter slides into the flange and welds to pipe (not the flange). Since the flange isn’t welded to the pipe, it can be disconnected easily for frequent cleaning and inspecting.
    304/304L Stainless Steel—Flanges hold up in humid, damp, and washdown environments but will corrode if exposed to salt water or chemicals.
    316/316L Stainless Steel—Flanges are the most corrosion resistant. They stand up to wet environments, just like 304 stainless steel flanges, but unlike 304 stainless steel, they will not corrode from salt water, chlorine solutions, and chemicals.
    Pipe
    Size
    Bolt
    Hole
    304/304L
    Stainless Steel
    316/316L
    Stainless Steel
    (A)
    (B)
    Flanged Connection
    Surface (B)
    Flange
    OD
    For Bolt
    Dia.
    Dia.
    No.
    Of
    Bolt Circle
    Dia.
    Pressure
    Class
    Max. Pressure
    @ Temp.
    Each
    Each
    Butt Weld
    12
    		12
    		Raised19"7/8"1"1217"150
    		230 psi @ 72° F44685K3250000000———0
     
    Slip-On Weld Female
    12
    		12
    		Raised19"7/8"1"1217"150
    		230 psi @ 72° F44685K32300000044695K2520000000
     
    Stub End
    12
    		12
    		Flat19"7/8"1"1217"150
    		230 psi @ 72° F44685K32700000044695K256000000
     
    Forged Blind Flanges
    Image of Product. Front. Front orientation. Pipe and Fittings. Low-Pressure Stainless Steel Unthreaded Pipe Flanges, Forged Blind Flanges, Flanged, Raised.
    Image of Product. Raised Surface on Back. Back orientation. Pipe and Fittings. Low-Pressure Stainless Steel Unthreaded Pipe Flanges, Forged Blind Flanges, Flanged, Raised.

    Front

    Raised

    Surface on

    Back

    Forged flanges have better strength than cast flanges.
    304/304L Stainless Steel—Flanges hold up in humid, damp, and washdown environments but will corrode if exposed to salt water or chemicals.
    316/316L Stainless Steel—Flanges are the most corrosion resistant. They stand up to wet environments, just like 304 stainless steel flanges, but unlike 304 stainless steel, they will not corrode from salt water, chlorine solutions, and chemicals.
    Material Certificate Icon
    Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
    Bolt
    Hole
    304/304L
    Stainless Steel
    316/316L
    Stainless Steel
    Pipe
    Size
    Flanged Connection
    Surface
    Flange
    OD
    For Bolt
    Dia.
    Dia.
    No.
    Of
    Bolt Circle
    Dia.
    Pressure
    Class
    Max. Pressure
    @ Temp.
    Each
    Each
    Flanged
    12
    		Raised19"7/8"1"1217"150
    		230 psi @ 72° F44685K329000000044695K2580000000
     
    Stub-End Straight Adapters
    Image of Product. Straight Adapter. Front orientation. Pipe Stub Ends. Low-Pressure Stainless Steel Unthreaded Pipe Flanges.

    Straight Adapter

    Stub-end straight adapters are used with flanges. Slide a flange onto the stub end and weld the stub end to pipe (not the flange). Since the flange isn’t welded to the pipe, it can be disconnected easily, which creates an access point for frequent cleaning and inspecting.
    304/304L
    Stainless Steel
    316/316L
    Stainless Steel
    Pipe
    Size
    Wall
    Thk.
    Flange
    OD
    Construction
    Pipe
    Schedule
    Each
    Each
    12
    		—15"Welded10
    		———043645K4620000000
    12
    		0.156"15"Welded10
    		45735K6230000000———0

    Thick-Wall Plastic Pipe Flanges for Water

    Also known as Pressure Class 150 flanges, these flanges have thick, strong walls to handle heavy duty industrial plumbing and water supply applications, such as water processing, waste water treatment, and irrigation. They meet NSF/ANSI 61 for drinking water. Bolt two same-size flanges together with a gasket (sold separately) to create an access point within a line. All are PVC, which has good corrosion resistance. Some are also glass filled for extra durability. They meet ASTM D1784 specifications and testing requirements for material quality.
    To prevent leaks in threaded connections, apply a sealant to the male threads. Threaded connections can be taken apart as needed for maintenance and repair. For metal threads, use PTFE tape. For plastic threads, apply a non-hardening, plastic-compatible sealant. Tape or sealants with PTFE are not recommended for plastic-to-plastic connections. When making a threaded connection be careful not to overtighten the threads. To prevent cracks and leaks, finger tighten the fitting, then wrench-tighten one to two turns.
    Warning: Never use plastic pipe fittings, flanges, and pipe with compressed air or gas.
    Flanges
    NSF/ANSI 61—To adhere to safety standards for drinking water systems, use pipe that meets NSF/ANSI 61.
    Pipe
    Size
    Bolt
    Hole
    (A)
    (B)
    Flanged Connection
    Surface (B)
    Flange
    OD
    For Bolt
    Dia.
    Dia.
    No.
    Of
    Bolt Circle
    Dia.
    Pressure
    Class
    Material
    Color
    Food Industry
    Std.
    Each
    Cement Socket Female
    12
    		12
    		Raised19"7/8"1"1217"150
    		PVCDark GrayNSF/ANSI 61
    		4881K1030000000
     
    Pipe Cement
    Each
    Pipe Cement for Pipe SIze Greater Than 6 (8-fl. oz. Can)74605A921000000
    Rotating Flanges
    Rotating flanges are also known as Van Stone flanges; they swivel for easy bolt hole alignment.
    NSF/ANSI 61—To adhere to safety standards for drinking water systems, use pipe that meets NSF/ANSI 61.
    Pipe
    Size
    Bolt
    Hole
    (A)
    (B)
    Flanged Connection
    Surface (B)
    Flange
    OD
    For Bolt
    Dia.
    Dia.
    No.
    Of
    Bolt Circle
    Dia.
    Pressure
    Class
    Material
    Color
    Food Industry
    Std.
    Each
    Cement Socket Female
    12
    		12
    		Raised19"7/8"1"1217"150
    		PVCDark GrayNSF/ANSI 61
    		4881K1060000000
     
    Pipe Cement
    Each
    Pipe Cement for Pipe SIze Greater Than 6 (8-fl. oz. Can)74605A921000000
    Blind Flanges
    NSF/ANSI 61—To adhere to safety standards for drinking water systems, use pipe that meets NSF/ANSI 61.
    Bolt
    Hole
    Pipe
    Size
    Flanged Connection
    Surface
    Flange
    OD
    For Bolt
    Dia.
    Dia.
    No.
    Of
    Bolt Circle
    Dia.
    Pressure
    Class
    Material
    Color
    Food Industry
    Std.
    Each
    Flanged
    12
    		Raised19"7/8"1"1217"150
    		PVCLight GrayNSF/ANSI 61
    		4881K1090000000
     

    Thin-Wall Butt-Weld Stainless Steel Unthreaded Pipe Stub Ends

    Image of System. Straight Pipe Stub End with Pipe Flange. Front orientation. Pipe Stub Ends. Thin-Wall Butt-Weld Stainless Steel Unthreaded Pipe Stub Ends.
    Image of Product. Straight Adapter. Front orientation. Pipe Stub Ends. Thin-Wall Butt-Weld Stainless Steel Unthreaded Pipe Stub Ends.

    Straight Pipe

    Stub End with

    Pipe Flange

    Straight

    Adapter

    Also known as Schedule 10 pipe stub ends, these are thin and lightweight. They have beveled ends that, when flush to pipe, create a trough for a strong weld that permits maximum flow.
    Pipe stub ends are used with flanges. Slide a flange onto the stub end and weld the stub end to pipe (not the flange). Since the flange isn’t welded to the pipe, it can be disconnected easily, which creates an access point for frequent cleaning and inspecting.
    304/304L Stainless Steel—304/304L stainless steel pipe stub ends have very good corrosion resistance.
    316/316L Stainless Steel—316/316L stainless steel pipe stub ends have excellent corrosion resistance.
    Pipe Stub Ends
    Flanges
    For Pipe
    For
    Flange
    Pipe
    Size
    Wall
    Thk.
    Flange
    OD
    Construction
    For Use With
    Specs. Met
    Schedule
    Material
    Class
    Material
    Each
    Each
    Straight Pipe Stub Ends, Butt Weld × Flanged
     
    304/304L Stainless Steel
    12
    		0.156"15"WeldedAir, Natural Gas, Oil, WaterASME B16.9, ASTM A403, MSS SP-4310
    		304 Stainless Steel, 304/304L Stainless Steel
    		150
    		304 Stainless Steel, 304/304L Stainless Steel
    		45735K623000000044685K3270000000
     
    316/316L Stainless Steel
    12
    		0.18"15"WeldedAir, Natural Gas, Oil, WaterASME B16.9, ASTM A403, MSS SP-4310
    		316 Stainless Steel, 316/316L Stainless Steel
    		150
    		316 Stainless Steel, 316/316L Stainless Steel
    		43645K46200000044695K256000000
     

    Clear-View Standard-Wall Plastic Pipe Nipples and Pipe for Water

    See inside your line with this clear pipe, which works in a variety of residential and commercial low-pressure plumbing and water supply applications. It connects to standard-wall plastic pipe fittings. Made of PVC, it has good corrosion resistance.
    Warning: Never use plastic pipe fittings, flanges, and pipe with compressed air or gas.
    Pipe—Unthreaded
    Image of Product. Male. Front orientation. Pipe and Fittings. Clear-View Standard-Wall Plastic Pipe Nipples and Pipe for Water, Pipe—Unthreaded, Cement Socket Male.

    Male

    NSF/ANSI 61—To adhere to safety standards for drinking water systems, use pipe that meets NSF/ANSI 61.
    Lg.,
    ft.
    Pipe
    Schedule
    Material
    Color
    Max. Pressure
    @ Temp.
    Food Industry
    Std.
    Each
    Cement Socket Male
     
    12 Pipe Size
    240
    		PVCBlue70 psi @ 72° FNSF/ANSI 61
    		49035K4220000000
    440
    		PVCBlue70 psi @ 72° FNSF/ANSI 61
    		49035K423000000
    1040
    		PVCBlue70 psi @ 72° FNSF/ANSI 61
    		49035K12300000000
     
    Pipe Cement
    Each
    Pipe Cement for Pipe SIze Greater Than 6 (8-fl. oz. Can)74605A921000000

    Standard-Wall Plastic Pipe Nipples and Pipe for Water

    Connect this pipe to standard-wall plastic pipe fittings for a variety of residential and commercial low-pressure plumbing and water supply applications. It’s made of PVC, which has good corrosion resistance. Pipe meets NSF/ANSI Standard 61 for drinking water. It also meets ASTM D1784 and ASTM D1785 specifications and testing requirements for material quality.
    Warning: Never use plastic pipe fittings, flanges, and pipe with compressed air or gas.
    Pipe—Unthreaded
    Image of Product. Male. Front orientation. Pipe and Fittings. Standard-Wall Plastic Pipe Nipples and Pipe for Water, Pipe—Unthreaded, Cement Socket Male.

    Male

    NSF/ANSI 61—To adhere to safety standards for drinking water systems, use pipe that meets NSF/ANSI 61.
    Lg.,
    ft.
    Pipe
    Schedule
    Material
    Color
    Max. Pressure
    @ Temp.
    Food Industry
    Std.
    Each
    Cement Socket Male
     
    12 Pipe Size
    240
    		PVCWhite130 psi @ 72° FNSF/ANSI 61
    		48925K3140000000
    540
    		PVCWhite130 psi @ 72° FNSF/ANSI 61
    		48925K33000000
    1040
    		PVCWhite130 psi @ 72° FNSF/ANSI 61
    		48925K34000000
     
    Pipe Cement
    Each
    Pipe Cement for Pipe SIze Greater Than 6 (8-fl. oz. Can)74605A921000000

    High-Temperature All-Metal Pipe Expansion Joints with Flanged Ends

    These all-metal expansion joints can handle higher temperatures than rubber expansion joints. They reduce stress, vibration, and noise in piping systems by providing a point of flexibility to absorb movement. Joints are made of 304 stainless steel for very good corrosion resistance. The flanged ends rotate for easy bolt hole alignment during installation. Flanges mate with a same-size flat-surface Class 150 flange with a gasket (sold separately).
    304 Stainless Steel
    Image of Product. Front orientation. Pipe Expansion Joints. High-Temperature All-Metal Pipe Expansion Joints with Flanged Ends.
    Expansion Joint Liners—Liners (sold separately) slide into the expansion joint to provide a smooth interior for unrestricted flow.
    Pipe Expansion Joints
    Expansion
    Joint Liners
    Distance
    Unthreaded Bolt Holes
    Flange
    OD
    Pipe
    Size
    Lg.
    No. of Bolt
    Holes
    Compression
    Expansion
    Offset
    Max. Pressure
    @ Temp.
    Expansion
    Joint Type
    Flange
    Material
    For Use With
    Temp. Range,
    ° F
    Max. Vacuum
    @ Temp.
    Bolt Hole
    Size
    Each
    Each
    19"12
    		8"121 1/4"3/8"1/8"150 psi @ 72° FBellowSteelAir, Natural Gas, Oil, Steam, Water-20 to 80029 in. Hg @ 72° F1"9413K690000000009413K490000000

    Low-Pressure Stainless Steel Butt-Weld Pipe Fittings

    Also known as Schedule 10 fittings, these are thin and lightweight. They have beveled ends that, when flush to pipe, create a trough for a strong weld that permits maximum flow.
    Straight Reducers
    Image of Product. Front orientation. Contains Annotated. Pipe and Fittings. Low-Pressure Stainless Steel Butt-Weld Pipe Fittings, Straight Reducers, Butt Weld × Butt Weld.

    Butt Weld × Butt Weld

    304/304L Stainless Steel—Fittings hold up in humid, damp, and washdown environments but will corrode if exposed to salt water or chemicals.
    Pipe
    Size
    304/304L
    Stainless Steel
    (A)
    (B)
    Construction
    Pipe
    Schedule
    Each
    Butt Weld × Butt Weld
    12
    		6
    		Welded10
    		45735K6260000000
    12
    		8
    		Welded10
    		45735K627000000
    12
    		10
    		Welded10
    		45735K628000000
     
    Short 90° Elbow Connectors
    Image of Product. Front orientation. Pipe and Fittings. Low-Pressure Stainless Steel Butt-Weld Pipe Fittings, Short 90° Elbow Connectors, Butt Weld.

    Butt Weld

    304/304L Stainless Steel—Fittings hold up in humid, damp, and washdown environments but will corrode if exposed to salt water or chemicals.
    316/316L Stainless Steel—Fittings are the most corrosion resistant. They stand up to wet environments, just like 304 stainless steel fittings, but unlike 304 stainless steel, they will not corrode from salt water, chlorine solutions, and chemicals.
    304/304L
    Stainless Steel
    316/316L
    Stainless Steel
    Pipe
    Size
    Construction
    OD
    Pipe
    Schedule
    Each
    Each
    Butt Weld
    12
    		Welded12 3/4"10
    		45735K61400000000043645K424000000000
     
    Long 90° Elbow Connectors
    Image of Product. Front orientation. Pipe and Fittings. Low-Pressure Stainless Steel Butt-Weld Pipe Fittings, Long 90° Elbow Connectors, Butt Weld.

    Butt Weld

    304/304L Stainless Steel—Fittings hold up in humid, damp, and washdown environments but will corrode if exposed to salt water or chemicals.
    316/316L Stainless Steel—Fittings are the most corrosion resistant. They stand up to wet environments, just like 304 stainless steel fittings, but unlike 304 stainless steel, they will not corrode from salt water, chlorine solutions, and chemicals.
    304/304L
    Stainless Steel
    316/316L
    Stainless Steel
    Pipe
    Size
    Construction
    OD
    Pipe
    Schedule
    Each
    Each
    Butt Weld
    12
    		Welded12 3/4"10
    		45735K612000000043645K4120000000
     
    45° Elbow Connectors
    Image of Product. Front orientation. Pipe and Fittings. Low-Pressure Stainless Steel Butt-Weld Pipe Fittings, 45° Elbow Connectors, Butt Weld.

    Butt Weld

    304/304L Stainless Steel—Fittings hold up in humid, damp, and washdown environments but will corrode if exposed to salt water or chemicals.
    316/316L Stainless Steel—Fittings are the most corrosion resistant. They stand up to wet environments, just like 304 stainless steel fittings, but unlike 304 stainless steel, they will not corrode from salt water, chlorine solutions, and chemicals.
    304/304L
    Stainless Steel
    316/316L
    Stainless Steel
    Pipe
    Size
    Construction
    OD
    Pipe
    Schedule
    Each
    Each
    Butt Weld
    12
    		Welded12 3/4"10
    		45735K616000000043645K4360000000
     
    Tee Connectors
    Image of Product. Front orientation. Pipe and Fittings. Low-Pressure Stainless Steel Butt-Weld Pipe Fittings, Tee Connectors, Butt Weld.

    Butt Weld

    304/304L Stainless Steel—Fittings hold up in humid, damp, and washdown environments but will corrode if exposed to salt water or chemicals.
    316/316L Stainless Steel—Fittings are the most corrosion resistant. They stand up to wet environments, just like 304 stainless steel fittings, but unlike 304 stainless steel, they will not corrode from salt water, chlorine solutions, and chemicals.
    304/304L
    Stainless Steel
    316/316L
    Stainless Steel
    Pipe
    Size
    Construction
    OD
    Pipe
    Schedule
    Each
    Each
    Butt Weld
    12
    		Welded12 3/4"10
    		45735K61800000000043645K448000000000
     
    Caps
    Image of Product. Front orientation. Pipe and Fittings. Low-Pressure Stainless Steel Butt-Weld Pipe Fittings, Caps, Butt Weld.

    Butt Weld

    304/304L Stainless Steel—Fittings hold up in humid, damp, and washdown environments but will corrode if exposed to salt water or chemicals.
    316/316L Stainless Steel—Fittings are the most corrosion resistant. They stand up to wet environments, just like 304 stainless steel fittings, but unlike 304 stainless steel, they will not corrode from salt water, chlorine solutions, and chemicals.
    304/304L
    Stainless Steel
    316/316L
    Stainless Steel
    Pipe
    Size
    Construction
    OD
    Pipe
    Schedule
    Each
    Each
    Butt Weld
    12
    		Welded12 3/4"10
    		45735K621000000043645K4590000000
     
    Stub-End Straight Adapters
    Image of Product. Straight Adapter. Front orientation. Pipe Stub Ends. Low-Pressure Stainless Steel Butt-Weld Pipe Fittings.

    Straight Adapter

    Stub-end straight adapters are used with flanges. Slide a flange onto the stub end and weld the stub end to pipe (not the flange). Since the flange isn’t welded to the pipe, it can be disconnected easily, which creates an access point for frequent cleaning and inspecting.
    304/304L
    Stainless Steel
    316/316L
    Stainless Steel
    Pipe
    Size
    Wall
    Thk.
    Flange
    OD
    Construction
    Pipe
    Schedule
    Each
    Each
    6
    		0.134"8 1/2"Welded10
    		45735K3120000000———0
    8
    		0.148"10 5/8"Welded10
    		45735K116000000———0
    10
    		0.134"12 3/4"Welded10
    		45735K622000000———0
    12
    		—15"Welded10
    		———043645K4620000000
    12
    		0.156"15"Welded10
    		45735K623000000———0

    Pipe Expansion Joints with Flanged Ends for High Vibration

    Image of ProductInUse. Shown Installed on a Flanged Pipe. Front orientation. Contains Annotated. Pipe Expansion Joints. Pipe Expansion Joints with Flanged Ends for High Vibration.

    Shown Installed on a Flanged Pipe

    These expansion joints have a double-bulb design for extra movement and vibration absorption. The flanged ends rotate for easy bolt hole alignment during installation. They mate with a same-size flat-surface Class 150 flange without the need for a gasket. Joints have a flexible body that is reinforced with nylon for added strength.
    Neoprene
    Image of Product. Expansion Joint. Front orientation. Pipe Expansion Joints. Pipe Expansion Joints with Flanged Ends for High Vibration.
    Image of Product. Limit Rod. Front orientation. Pipe Expansion Joint Limit Rods. Pipe Expansion Joints with Flanged Ends for High Vibration.

    Expansion Joint

    Limit Rod

    Limit Rod Sets—Attach limit rod sets (sold separately) to the flanges to prevent overextension where anchoring is insufficient. To accommodate the thickness of the limit rod mounting plate, use bolts that are 7/8" longer than the bolts connecting the expansion joint to the pipe flange. Each set of limit rods requires eight bolts (not included).
    Pipe Expansion Joints
    Limit Rod Sets
    Distance
    Threaded Bolt Holes
    Unthreaded Bolt Holes
    Flange
    OD
    Pipe
    Size
    Lg.
    No. of Bolt
    Holes
    Compression
    Expansion
    Offset
    Max. Pressure
    @ Temp.
    Expansion Joint
    Type
    Flange Material
    Reinforcement
    Material
    For Use With
    Temp. Range,
    ° F
    Max. Vacuum
    @ Temp.
    Bolt Hole
    Thread Size
    Each
    Bolt Hole
    Size
    Each
    Pair
    19"12
    		13"122 3/8"1 3/8"1 3/8"220 psi @ 72° FDouble BulbZinc-Plated SteelNylon
    		Grain Alcohol, Nonabrasive Slurries, Water-10 to 22026 in. Hg @ 72° F7/8"-9
    		6819K710000000001"6819K560000000006819K930000000
    EPDM
    Image of Product. Expansion Joint. Front orientation. Pipe Expansion Joints. Pipe Expansion Joints with Flanged Ends for High Vibration.
    Image of Product. Limit Rod. Front orientation. Pipe Expansion Joint Limit Rods. Pipe Expansion Joints with Flanged Ends for High Vibration.

    Expansion Joint

    Limit Rod

    Limit Rod Sets—Attach limit rod sets (sold separately) to the flanges to prevent overextension where anchoring is insufficient. To accommodate the thickness of the limit rod mounting plate, use bolts that are 7/8" longer than the bolts connecting the expansion joint to the pipe flange. Each set of limit rods requires eight bolts (not included).
    Pipe Expansion Joints
    Limit Rod Sets
    Distance
    Unthreaded Bolt Holes
    Flange
    OD
    Pipe
    Size
    Lg.
    No. of Bolt
    Holes
    Compression
    Expansion
    Offset
    Max. Pressure
    @ Temp.
    Expansion Joint
    Type
    Flange Material
    Reinforcement
    Material
    For Use With
    Temp. Range,
    ° F
    Max. Vacuum
    @ Temp.
    Bolt Hole
    Size
    Each
    Pair
    19"12
    		13"122 3/8"1 3/8"1 3/8"220 psi @ 72° FDouble BulbZinc-Plated SteelNylon
    		Alcohol, Water-20 to 25026 in. Hg @ 72° F1"6819K910000000006819K930000000

    Thick-Wall Plastic Pipe Nipples and Pipe for Water

    With thicker, stronger walls than standard-wall pipe, this Schedule 80 pipe can handle heavy duty industrial plumbing and water supply applications, such as water processing, waste water treatment, and irrigation. It’s made of PVC, which has good corrosion resistance. Pipe meets ASTM D1784 and ASTM D1785 specifications and testing requirements for material quality.
    To prevent leaks in threaded connections, apply a sealant to the male threads. Threaded connections can be taken apart as needed for maintenance and repair. For metal threads, use PTFE tape. For plastic threads, apply a non-hardening, plastic-compatible sealant. Tape or sealants with PTFE are not recommended for plastic-to-plastic connections. When making a threaded connection be careful not to overtighten the threads. To prevent cracks and leaks, finger tighten the fitting, then wrench-tighten one to two turns.
    Warning: Never use plastic pipe fittings, flanges, and pipe with compressed air or gas.
    Pipe—Unthreaded
    Image of Product. Male. Front orientation. Pipe and Fittings. Thick-Wall Plastic Pipe Nipples and Pipe for Water, Pipe—Unthreaded, Cement Socket Male.

    Male

    NSF/ANSI 61—To adhere to safety standards for drinking water systems, use pipe that meets NSF/ANSI 61.
    Lg.,
    ft.
    Pipe
    Schedule
    Material
    Color
    Max. Pressure
    @ Temp.
    Food Industry
    Std.
    Each
    Cement Socket Male
     
    12 Pipe Size
    280
    		PVCDark Gray230 psi @ 72° FNSF/ANSI 61
    		4802N430000000
    580
    		PVCDark Gray230 psi @ 72° FNSF/ANSI 61
    		48855K63000000
    1080
    		PVCDark Gray230 psi @ 72° FNSF/ANSI 61
    		48855K64000000
     
    Pipe Cement
    Each
    Pipe Cement for Pipe SIze Greater Than 6 (8-fl. oz. Can)74605A921000000

    Pipe Expansion Joints with Flanged Ends

    Image of System. Shown Installed on a Flanged Pipe. Front orientation. Contains Annotated. Pipe Expansion Joints. Pipe Expansion Joints with Flanged Ends.

    Shown Installed on a Flanged Pipe

    These joints reduce stress, vibration, and noise in piping systems by providing a point of flexibility to absorb movement. The flanged ends rotate for easy bolt hole alignment during installation. They mate with a same-size flat-surface Class 150 flange without the need for a gasket. Joints have a flexible body that is reinforced with nylon for added strength.
    Position the expansion joints as close as possible to anchor points.
    Neoprene
    Image of Product. Expansion Joint. Front orientation. Pipe Expansion Joints. Pipe Expansion Joints with Flanged Ends.
    Image of Product. Limit Rod. Front orientation. Pipe Expansion Joint Limit Rods. Pipe Expansion Joints with Flanged Ends.

    Expansion Joint

    Limit Rod

    Limit Rod Sets—Attach limit rod sets (sold separately) to the flanges to prevent overextension where anchoring is insufficient. To accommodate the thickness of the limit rod mounting plate, use bolts that are 7/8" longer than the bolts connecting the expansion joint to the pipe flange. Each set of limit rods requires eight bolts (not included).
    Pipe Expansion Joints
    Limit Rod Sets
    Distance
    Threaded Bolt Holes
    Unthreaded Bolt Holes
    Flange
    OD
    Pipe
    Size
    Lg.
    No. of Bolt
    Holes
    Compression
    Expansion
    Offset
    Max. Pressure
    @ Temp.
    Expansion Joint
    Type
    Flange Material
    Reinforcement
    Material
    For Use With
    Temp. Range,
    ° F
    Max. Vacuum
    @ Temp.
    Bolt Hole
    Thread Size
    Each
    For Bolt
    Dia.
    Each
    Pair
    19"12
    		8"121"5/8"3/4"220 psi @ 72° FSingle BulbZinc-Plated SteelNylon
    		Nonabrasive Slurries, Water-10 to 22026 in. Hg @ 72° F7/8"-9
    		9175K2200000001"9175K2500000009175K920000000
    EPDM
    Image of Product. Expansion Joint. Front orientation. Pipe Expansion Joints. Pipe Expansion Joints with Flanged Ends.
    Image of Product. Limit Rod. Front orientation. Pipe Expansion Joint Limit Rods. Pipe Expansion Joints with Flanged Ends.

    Expansion Joint

    Limit Rod

    Limit Rod Sets—Attach limit rod sets (sold separately) to the flanges to prevent overextension where anchoring is insufficient. To accommodate the thickness of the limit rod mounting plate, use bolts that are 7/8" longer than the bolts connecting the expansion joint to the pipe flange. Each set of limit rods requires eight bolts (not included).
    Pipe Expansion Joints
    Limit Rod Sets
    Distance
    Unthreaded Bolt Holes
    Flange
    OD
    Pipe
    Size
    Lg.
    No. of Bolt
    Holes
    Compression
    Expansion
    Offset
    Max. Pressure
    @ Temp.
    Expansion Joint
    Type
    Flange Material
    Reinforcement
    Material
    For Use With
    Temp. Range,
    ° F
    Max. Vacuum
    @ Temp.
    For Bolt
    Dia.
    Each
    Pair
    19"12
    		8"121"5/8"3/4"220 psi @ 72° FSingle BulbZinc-Plated SteelNylon
    		Alcohol, Water-20 to 25026 in. Hg @ 72° F1"9175K6200000009175K920000000

    Rubber Drain Pipe Plugs

    Seal unthreaded pipe ends with these plugs. They come with a band that clamps over the outside wall of your pipe and tightens with a screwdriver.
    Plugs
    Image of Product. Plugs. Front orientation. Pipe and Fittings. Rubber Drain Pipe Plugs, Plugs, Clamp-On Female.

    Plugs

    For Pipe
    Size
    For Pipe OD
    Max. Water Back
    Pressure, ft. of head
    Max. Air Back
    Pressure
    Material
    Each
    Clamp-On Female
    12
    		12.20" to 12.80"10Not RatedNeoprene2394K220000000
     

    Thin-Wall Stainless Steel Unthreaded Pipe Nipples and Pipe

    Image of Product. Front orientation. Pipe and Fittings. Thin-Wall Stainless Steel Unthreaded Pipe Nipples and Pipe.
    Also known as Schedule 10, this pipe is thin and lightweight. Weld it to fittings and additional lengths of pipe. Welded connections are stronger than threaded connections and less likely to leak.
    Pipe—Unthreaded
    304/304L Stainless Steel—Pipe holds up in humid, damp, and washdown environments but will corrode if exposed to salt water or chemicals.
    316/316L Stainless Steel—Pipe is the most corrosion resistant. It stands up to wet environments, just like 304 stainless steel pipe, but unlike 304 stainless steel, it will not corrode from salt water, chlorine solutions, and chemicals.
    Welded—Pipe has a weld bead on the inside.
    304/304L
    Stainless Steel
    316/316L
    Stainless Steel
    Lg.,
    ft.
    Construction
    Pipe
    Schedule
    Each
    Each
    Butt Weld/Socket Connect/Weld Socket Male
     
    12 Pipe Size
    1Welded10
    		4347K44100000004378K6410000000
    3Welded10
    		4347K4420000004378K642000000
    6Welded10
    		4347K4430000004378K643000000
     
    back to top