How to Identify and Measure Fittings
Pipe size is an industry designation, not the actual size. View information about how to measure threaded and unthreaded pipe and pipe fittings.
More
45° Flared Fittings for Copper and Brass Tubing
- Temperature Range: -65° to 250° F
- Tubing: Use with seamless brass and copper that meets ASTM B280
No sleeve is required to assemble these fittings, which makes for a faster, more convenient installation compared to 37° flared fittings. They require a nut (sold separately) for each tube end. Fittings are also known as refrigeration and SAE fittings. They are brass for good corrosion resistance.
NPTF (Dryseal) threads are compatible with NPT threads.
Copper tube size is the accepted designation of the copper tubing industry, not the actual tube OD.
- For Use With: Air, Cutting Oil, Diesel Fuel, Fuel Oil, Mineral Oil, Refrigerant, Water; except adapters for 1/8" and 1" tube OD are not for use with fuel oil
- Specifications Met: See table
- For Use With: Air, Cutting Oil, Diesel Fuel, Fuel Oil, Mineral Oil, Refrigerant, Water; except nuts for 1" tube OD are not for use with fuel oil
- Specifications Met: SAE J512, SAE J513, UL Listed; except nuts for 1" tube OD meet SAE J512 and SAE J513 only
For Tube | Each | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| OD | Wall Thick. | Nut Material | Max. Pressure | Lg. | 1-19 | 20-99 | 100-Up | ||
Short Nuts  | |||||||||
| A | 1" | 0.035" | Brass | 350 psi @ 73° F | 1 13/16" | 000000000 | 000000 | 000000 | 000000 |
Nuts for 45° Flared Fittings for Copper and Brass Tubing
- For Use With: Air, Cutting Oil, Diesel Fuel, Fuel Oil, Mineral Oil, Refrigerant, Water; except nuts for 1" tube OD are not for use with fuel oil
- Temperature Range: -65° to 250° F
- Tubing: Use with seamless brass and copper that meets ASTM B280
- Specifications Met: SAE J512, SAE J513, UL Listed; except nuts for 1" tube OD meet SAE J512 and SAE J513 only
Use these nuts with 45° flared tube fittings to provide a tight metal-to-metal seal on flared copper and brass tubing. Nuts are brass for good corrosion resistance. They don’t require a sleeve, which makes for a fast, convenient installation.
For Tube | |||||||
|---|---|---|---|---|---|---|---|
| OD | Wall Thick. | Nut Material | Max. Pressure | Lg. | Each | ||
Short Nuts | |||||||
| A | 1" | 0.035" | Brass | 350 psi @ 73° F | 1 13/16" | 000000000 | 000000 |
Rod Alignment Couplers
Increase cylinder life by fixing alignment problems between air or hydraulic cylinders and driven components. Couplers have a threaded end that moves to compensate for the angle of misalignment, reducing wear on cylinder bearings and seals. Couplers have a male and female end.
| Thread Size | Body Material | OD | Lg. | Max. Pull Force, lbs. | Each | |
1° of Misalignment | ||||||
|---|---|---|---|---|---|---|
| 1 3/8"-12 | Steel | 2 1/2" | 4 9/16" | 40,710 | 000000 | 0000000 |