Install these cranes with anchor bolts (sold separately) set in a reinforced-concrete foundation. They rotate 360° to maximize floor space. Also known as jib cranes, they consist of a mast, head assembly, and flat beam that accommodates most trolleys. Use the included base plate pattern as a template to properly set anchor bolts into the foundation.

Anchor bolts include leveling nuts and securing nuts with washers to hold the mast's base plate.

Rotation stops prevent cranes from turning past a certain point to protect surrounding structures. To install, weld the stop bar to the crane’s mast assembly and the stop angle to the head assembly. Since rotation stops are welded, they’ll permanently limit a crane’s rotation.

Also Available: Other spans (from 10 ft. up to 20 ft.), capacities (up to 10,000 lbs.), and clearances (up to 20 ft.). Select 3244T999 and choose specifications.

Warning: Never use to lift people or items over people.

For technical drawings and 3-D models, click on a part number.

Also known as end trucks, use these trolleys with your own beams to create a crane. For example, use two trolleys to allow a beam to move along two structural beams. Bumpers on the trolley body protect the wheels.

Top/bottom-mount trolleys allow you to run your moving beam along either the top or bottom of your fixed beams.

Bottom-mount trolleys are used on the bottom of fixed beams.

Warning: Never use to lift people or items over people.

For technical drawings and 3-D models, click on a part number.

Adjust the vertical clearance and horizontal span to suit your needs. Cranes can be rolled into your work area for infrequent lifts and then rolled away to free up space.

Aluminum cranes are lightweight.

Yellow painted steel cranes are not designed for prolonged use outdoors.

Cranes with steel wheels have legs that pivot for maneuverability in tight places.

Warning: Never use to lift people or items over people.

For technical drawings and 3-D models, click on a part number.

These cranes can be quickly broken down into three pieces for convenient transport and storage. The vertical clearance is adjustable. Cranes include a trolley that slides along the beam and has a mounting hole for your lifting device.

Warning: Never use to lift people or items over people.

For technical drawings and 3-D models, click on a part number.

These cranes can be rolled into your work area for infrequent lifts and then rolled away to free up space.

Warning: Never use to lift people or items over people.

For technical drawings and 3-D models, click on a part number.

Roll these cranes over grass, gravel, and even mud to lift heavy loads. Equipped with air-filled wheels, they absorb shock better than any of our other gantry cranes, moving smoothly across rough and uneven surfaces. The wheels are butyl rubber for traction even when it’s slick. Made of aluminum, these cranes are strong but lightweight. They resist corroding in the rain and other wet conditions. Lock the wheels to secure these cranes in place. They are not meant to be moved while under load.

Suitable for a wide range of spaces, these cranes also have a beam you can adjust depending on how much vertical clearance you need. Raise the beam to lift large loads or lower it if overhead space is tight. Attach a manual or motorized trolley to the beam to move a load along the length of the span.

Warning: Never use to lift people or items over people.

For technical drawings and 3-D models, click on a part number.

A built-in trolley provides stability as these hoists travel along your beam. They can be mounted on fixed beams as well as on cranes with beams. Pull the hand chain to lift and position your load, and the brake will securely hold it in place.

Warning: Never use to lift people or items over people.

CM chain hoists have a body that spins 360°, so you can operate them from any direction.