4,000 Lb. Capacity Cranes

Filter by

Weight Capacity

Less than 1,000 lb.

1,000 lb. to 1,999 lb.

2,000 lb. to 2,999 lb.

3,000 lb. to 9,999 lb.

10,000 lb. or greater

Span

Clearance

Material

Overall Height

Weight

Length

7 1/2 ft. to 12 1/2 ft.

Overall Length

Mounting Location

Beam Height

Application

For Beam Shape

Beam Width

U.S.–Mexico–Canada Agreement (USMCA) Qualifying

Height

Overall Width

Brake Type

Export Control Classification Number (ECCN)

Mobility

REACH

DFARS Specialty Metals

RoHS

Mount Type

Width

Crane Beam Type

Color

73 Products

Gantry Cranes

These cranes can be rolled into your work area for infrequent lifts and then rolled away to free up space.

Warning: Never use to lift people or items over people.

			Overall			Beam					Wheel
	Wt. Cap.	Clearance	Lg., ft.	Wd.	Ht.	Wd.	Ht.	Type	Wheel Configuration	Brake Type	Dia.	Material	Specs. Met		Each
Steel







				109" Span

				2 ton, 4,000 lb.	121"	10	65"	129"	4"	8 1/8"	Open	Four Swivel Casters	Wheel Brake and Swivel Lock (Total Lock)	8"	Nylon	ANSI/NEMA Z535, ASME B30.17, OSHA Compliant 29 CFR 1910.179	3110T205	000000000




						169" Span

						2 ton, 4,000 lb.	121"	15	65"	129"	4"	8 1/8"	Open	Four Swivel Casters	Wheel Brake and Swivel Lock (Total Lock)	8"	Nylon	ANSI/NEMA Z535, ASME B30.17, OSHA Compliant 29 CFR 1910.179	3110T206	00000000

Forklift Booms

Shown Installed on Forklift

Slide these booms onto forklift forks to handle long, cumbersome loads. They secure to the forklift carriage with the included safety chains. These booms are labeled with capacity for each hook position. First hook position is measured from the fork pocket end.

Note: Capacities are approximate and depend on the type and load capabilities of the forklift used. Check with the manufacturer of your forklift for load capabilities before using.

Warning: Never use to lift people or items over people.

Forklift Booms


Style A	Style B

Style D

Horizontally Telescoping—Horizontally telescoping booms extend and retract lengthwise to handle extra-long loads and reach into hard-to-access areas.

Vertically-Adjustable Boom—Those that also adjust vertically move in and out and up and down for the most flexible load placement. To access tall loads, raise the hook position and lock the boom into place with the pin.

		Wt. Cap., lb.												For Max. Fork			Hook
	Style	@ 3 ft.	@ 4 ft.	@ 5 ft.	@ 6 ft.	@ 7 ft.	@ 8 ft.	@ 9 ft.	@ 10 ft.	@ 11 ft.	@ 12 ft.	Fork Pocket Spacing Ctr.-to-Ctr.	For Min. Fork Lg.	Wd.	Ht.	Material	Type	Movement	Opening Wd.	First Hook Position, ft.	Lg., ft.		Each
Fixed



		A	4,000	3,700	3,500	3,200	—	—	—	—	—	—	11"	24"	7 1/2"	2 1/2"	Painted Steel	Latching Grab	Swivel Rigid	1" 5/8"	3	7	3638T111	0000000


		Horizontally Telescoping



				B	4,000	3,700	3,500	3,200	3,000	2,700	2,500	2,200	2,000	1,700	24"	24"	7 1/2"	2 1/2"	Painted Steel	Latching Grab	Swivel Rigid	1" 5/8"	3	7 1/2 to 12 1/2	3638T112	00000000


				B	6,000	5,000	4,500	4,000	3,500	3,000	2,600	2,300	2,000	1,800	24"	24"	7 1/4"	2 1/4"	Painted Steel	Latching Latching	Swivel Swivel	1" 1"	3	7 1/2 to 12 1/2	3638T113	00000000
				B	8,000	6,600	6,000	5,300	4,600	4,000	3,500	3,000	2,600	2,200	24"	24"	7 1/4"	2 1/4"	Painted Steel	Latching Latching	Swivel Swivel	1" 1 1/4"	3	7 to 12 1/2	3638T114	00000000


				Horizontally Telescoping, Vertically Adjustable (37° Maximum Lifting Angle)



						D	4,000	3,700	3,500	3,200	3,000	2,700	2,500	2,200	2,000	1,700	24"	24"	7 1/2"	2 1/2"	Painted Steel	Latching Grab	Swivel Rigid	1" 5/8"	3	7 1/2 to 12 1/2	3638T116	00000000


						D	6,000	5,000	4,500	4,000	3,500	3,000	2,600	2,300	2,000	1,800	24"	24"	7 1/4"	2 1/4"	Painted Steel	Latching Latching	Swivel Swivel	1" 1"	3	7 1/2 to 12 1/2	3638T117	00000000
						D	8,000	6,600	6,000	5,300	4,600	4,000	3,500	3,000	2,600	2,200	24"	24"	7 1/4"	2 1/4"	Painted Steel	Latching Latching	Swivel Swivel	1" 1 1/4"	3	7 to 12 1/2	3638T118	00000000

Replacements for Forklift Booms

Replacement Safety-Pin Shackles

Image of Product. Front orientation. Contains Annotated. Shackles.

A bolt fastened with a nut and cotter pin makes these shackles more secure than screw-pin shackles. Also known as anchor and bow shackles, the wide body provides room to attach multiple connectors.

Note: Capacities listed are for vertical lifting only. As the lift angle changes from vertical, the amount of weight the shackle can lift is significantly reduced.

Galvanized Steel—Galvanized steel shackles have a thick coating for corrosion resistance.

	Thk.	Pin Dia.	Opening Wd.	Inside Lg.	Inside Wd.	Specs. Met	Mil. Spec.		Each
Galvanized Steel



	4,400	1/2"	21/32"	13/16"	1 29/32"	1 5/16"	ASME B30.26	Fed. Spec. RR-C-271	3555T51	000000


	7,100	5/8"	25/32"	1 1/16"	2 13/32"	1 23/32"	ASME B30.26	Fed. Spec. RR-C-271	3555T52	00000
	10,400	3/4"	29/32"	1 1/4"	2 13/16"	2"	ASME B30.26	Fed. Spec. RR-C-271	3555T53	00000

Replacement Hooks with Swivel

Image of Product. Front orientation. Hooks.

Rotating for easy positioning before a load is applied, these have a latch to ensure that rope, chain, and fittings won't separate from the hook when the load slackens. The hook opening accommodates large anchor points and allows chain to move freely through the closed hook.

Note: Capacities are for vertical lifting only.

	Hook		Eye
Wt. Cap., lb.	Opening Wd.	Usable Lg.	ID	Thk.	Specs. Met	For Use With		Each
4,400	1 1/16"	6 1/8"	1 3/4"	5/8"	ASME B30.10	Chain, Wire Rope	3525T613	0000000
6,600	1 3/16"	6 1/2"	1 3/4"	5/8"	ASME B30.10	Chain, Wire Rope	3525T614	000000
11,000	1 1/2"	7 1/2"	2"	3/4"	ASME B30.10	Chain, Wire Rope	3525T615	000000

Includes		Each
Latch, Spring, Nut and Bolt	35315T43	000000
Latch, Spring, Nut and Bolt	35315T44	00000
Latch, Spring, Nut and Bolt	35315T45	00000

Forklift Booms—Made in the U.S.


Style E	Style F

Style G	Style H

Replacement Pin Housing Rebuild Kits	Replacement Pull Pins

Booms that are made in the U.S. have a label that confirms they are manufactured in the United States.

Horizontally Telescoping—Horizontally telescoping booms extend and retract lengthwise to handle extra-long loads and reach into hard-to-access areas.

Style G—Styles C and G are designed for tall loads where more bottom clearance is needed. The fixed section has three hook positions spaced 6” apart.

	Forklift Booms																							Replacement Pin Housing Rebuild Kits		Replacement Pull Pins
		Wt. Cap., lb.												For Max. Fork			Hook
	Style	@ 3 ft.	@ 4 ft.	@ 5 ft.	@ 6 ft.	@ 7 ft.	@ 8 ft.	@ 9 ft.	@ 10 ft.	@ 11 ft.	@ 12 ft.	Fork Pocket Spacing Ctr.-to-Ctr.	For Min. Fork Lg.	Wd.	Ht.	Material	Type	Movement	Opening Wd.	First Hook Position, ft.	Lg., ft.		Each		Each		Each
Fixed



		E	—	4,000	3,500	3,000	2,500	2,000	—	—	—	—	11 1/2"	24"	5 1/2"	2 1/2"	Painted Steel	Latching	Swivel	1 1/16"	4	8	3638T31	000000000	———	0	———	0


		Horizontally Telescoping



				F	4,000	4,000	4,000	4,000	3,200	2,600	2,200	1,900	1,600	1,500	15"	30"	7 1/2"	2 1/2"	Painted Steel	Latching	Swivel	1 1/16"	3	7 to 12	3638T22	00000000	3638T42	0000000	———	0


				G	4,000	4,000	3,500	1,800	—	—	—	—	—	—	12 1/2"	30"	7 1/2"	2 1/2"	Painted Steel	Latching	Swivel	1 1/16"	2 1/2	4 to 6	3638T41	00000000	3638T42	000000	———	0


				Horizontally Telescoping, Vertically Adjustable (40° Maximum Lifting Angle)



						H	4,000	4,000	4,000	4,000	3,200	2,600	2,200	1,900	1,600	1,500	15"	30"	7 1/2"	2 1/2"	Painted Steel	Latching	Swivel	1 1/16"	3	7 to 12	3638T25	00000000	3638T42	000000	3638T43	0000000

Replacements for Forklift Booms

Replacement Safety-Pin Shackles

A bolt fastened with a nut and cotter pin makes these shackles more secure than screw-pin shackles. Also known as anchor and bow shackles, the wide body provides room to attach multiple connectors.

Note: Capacities listed are for vertical lifting only. As the lift angle changes from vertical, the amount of weight the shackle can lift is significantly reduced.

Galvanized Steel—Galvanized steel shackles have a thick coating for corrosion resistance.

	Thk.	Pin Dia.	Opening Wd.	Inside Lg.	Inside Wd.	Specs. Met	Mil. Spec.		Each
Galvanized Steel



	4,400	1/2"	21/32"	13/16"	1 29/32"	1 5/16"	ASME B30.26	Fed. Spec. RR-C-271	3555T51	000000


	7,100	5/8"	25/32"	1 1/16"	2 13/32"	1 23/32"	ASME B30.26	Fed. Spec. RR-C-271	3555T52	00000

Replacement Hooks with Swivel

Note: Capacities are for vertical lifting only.

	Hook		Eye
Wt. Cap., lb.	Opening Wd.	Usable Lg.	ID	Thk.	Specs. Met	For Use With		Each
4,400	1 1/16"	6 1/8"	1 3/4"	5/8"	ASME B30.10	Chain, Wire Rope	3525T613	0000000

Includes		Each
Latch, Spring, Nut and Bolt	35315T43	000000

Adjustable Gantry Cranes


Aluminum	Painted Steel

Adjust the vertical clearance to suit your needs. Cranes can be rolled into your work area for infrequent lifts and then rolled away to free up space.

Warning: Never use to lift people or items over people.

Aluminum—Aluminum cranes are lightweight.

Painted Steel—Painted steel cranes are not designed for prolonged use outdoors.

Steel Wheel—Cranes with steel wheels have legs that pivot for maneuverability in tight places.

				Overall			Beam					Wheel
	Wt. Cap.	Clearance, ft.	Clearance Adjustment Increments	Lg.	Wd.	Ht.	Wd.	Ht.	Type	Wheel Configuration	Brake Type	Dia.	Material	Specs. Met		Each
Aluminum







				4 ft. to 6 ft. Span

				2 ton, 4,000 lb.	8 to 10	6"	8 ft.	59"	102" to 132"	4"	8"	Open	Four Swivel Casters	Without Brake	8"	Polyurethane Rubber	CMAA Specification No. 70, CMAA Specification No. 79, OSHA Compliant 29 CFR 1910.179	3763T31	000000000




						6 ft. to 10 ft. Span

						2 ton, 4,000 lb.	8 to 10	6"	12 ft.	59"	106" to 136"	5"	12"	Open	Four Swivel Casters	Without Brake	8"	Polyurethane Rubber	CMAA Specification No. 70, CMAA Specification No. 79, OSHA Compliant 29 CFR 1910.179	3763T33	00000000


						Yellow Painted Steel







										5 ft. to 10 1/2 ft. Span

										2 ton, 4,000 lb.	6 to 9	12"	138"	5 ft.	82" to 116"	4"	8"	Open	Four Swivel Casters	Without Brake	8"	Steel	CMAA Specification No. 70, OSHA Compliant 29 CFR 1910.179	3110T33	00000000




												6 ft. to 10 1/2 ft. Span

												2 ton, 4,000 lb.	7 to 10	12"	138"	66"	94" to 128"	4"	8"	Open	Four Swivel Casters	Without Brake	8"	Steel	CMAA Specification No. 70, OSHA Compliant 29 CFR 1910.179	3110T34	00000000




														8 ft. to 10 1/2 ft. Span

														2 ton, 4,000 lb.	9 to 14	12"	138"	90"	118" to 172"	4"	8"	Open	Four Swivel Casters	Without Brake	8"	Steel	CMAA Specification No. 70, OSHA Compliant 29 CFR 1910.179	3110T36	00000000

Accessories and Replacements for Cranes

	Wheel
2	8"	Polyurethane Rubber	3763T192	0000000

Replacement Casters for Cranes with Steel Wheels

Image of Product. Front orientation. Steel Wheel. Adjustable Gantry Cranes .

Replacement

Casters for

Cranes with Steel

Wheels

		Wheel
For Wt. Cap., ton	Brake Type	Dia.	Material		Each
2, 3	Wheel Brake and Swivel Lock (Total Lock)	8"	Steel	3110T193	0000000
2, 3	Without Brake	8"	Steel	3110T191	000000

For Wt. Cap., ton	For Wheel Dia.		Each
2	8"	3763T194	000000

Column-Mount Rotating Cranes

Designed to save valuable floor space, these cranes mount to structural columns. They’re also known as jib cranes. Make sure the column you mount these to can handle the thrust/pull force, which is how much these cranes will push and pull on your column as they lift loads. Use ASTM A325 Structural Bolts to mount these cranes.

Warning: Never use to lift people or items over people.

Cranes with Mast

Open Crane Beam

Also Available: Other spans of cranes with an open-track beam up to 20 ft. and capacities up to 10,000 lbs. Select 3729T999 and specify span and capacity.

Cranes with a mast let you lift loads from higher than cranes with a tie rod because the beam can be mounted closer to your ceiling. These cranes generally push and pull less on your column than cranes with a tie rod.

Open Crane Beam—Those with an open track accommodate most trolleys. Stops on the beam limit trolley travel.

				Beam
	Wt. Cap.	Thrust/Pull Force, lbf	Overall Ht.	Wd.	Ht.	Rotation	Material	Fasteners Included	Mounting Hole Dia.	Features	Specs. Met		Each
Open Crane Beam







				8 ft. Span

				2 ton, 4,000 lb.	9,450	59"	6 1/2"	12 1/2"	200°	Yellow Painted Steel	No	13/16"	Beam Stops	OSHA Compliant 29 CFR 1910.179	3729T105	000000000




						10 ft. Span

						2 ton, 4,000 lb.	12,210	59"	6 1/2"	12 1/2"	200°	Yellow Painted Steel	No	13/16"	Beam Stops	OSHA Compliant 29 CFR 1910.179	3729T106	00000000




								12 ft. Span

								2 ton, 4,000 lb.	15,000	59"	6 1/2"	12 1/2"	180°	Yellow Painted Steel	No	13/16"	Beam Stops	OSHA Compliant 29 CFR 1910.179	3729T86	00000000




										20 ft. Span

										2 ton, 4,000 lb.	17,300	89"	8 1/4"	21"	180°	Yellow Painted Steel	No	13/16"	Beam Stops	OSHA Compliant 29 CFR 1910.179	3729T108	00000000

Cranes with Tie Rod

Also Available: Other spans up to 30 ft. and capacities up to 10,000 lbs. Select 3245T999 and specify span and capacity.

Cranes with a tie rod are suspended overhead, allowing trolleys to travel over a longer span without a mast obstructing their movement. However, they require more space above the beam than cranes with a mast.

Open Crane Beam—Those with an open track accommodate most trolleys. Stops on the beam limit trolley travel.

				Beam
	Wt. Cap.	Thrust/Pull Force, lbf	Overall Ht.	Wd.	Ht.	Rotation	Material	Fasteners Included	Mounting Hole Dia.	Features	Specs. Met		Each
Open Crane Beam







				14 ft. Span

				2 ton, 4,000 lb.	16,580	63"	5 1/4"	8 1/4"	200°	Yellow Painted Steel	No	13/16"	Beam Stops	OSHA Compliant 29 CFR 1910.179	3245T98	000000000




						20 ft. Span

						2 ton, 4,000 lb.	16,980	87"	6 1/2"	12 1/2"	200°	Yellow Painted Steel	No	13/16"	Beam Stops	OSHA Compliant 29 CFR 1910.179	3245T96	00000000

Beam Trolleys

Bottom-Mount Trolleys Used with

Beams to Create a Crane

Top/Bottom Mount

Bottom Mount

Also known as end trucks, use these trolleys with your own beams to create a crane. For example, use two trolleys to allow a beam to move along two structural beams. Bumpers on the trolley body protect the wheels.

Warning: Never use to lift people or items over people.

Bottom Mount—Bottom-mount trolleys are used on the bottom of fixed beams.

Top/Bottom Mount—Top/bottom-mount trolleys allow you to run your moving beam along either the top or bottom of your fixed beams.

	Trolleys												Replacement Wheels
		For Fixed Beam		For Moving Beam
	Wt. Cap.	Wd.	Ht.	Wd.	Ht.	Overall Lg.	Material	Wheel Material	Fasteners Included	Features		Pair		Each
Top/Bottom Mount



		2 ton/4,000 lb.	3 1/2" to 5 1/4"	6" to 12"	3 1/2" to 6"	6" to 18"	50"	Steel	Iron	Yes	Bumpers	3247T71	000000000	3269T801	000000


		Bottom Mount



				2 ton/4,000 lb.	3" to 5 1/4"	5" to 18"	3 1/2" to 5 1/2"	6" to 15"	49"	Steel	Iron	Yes	Bumpers	3751T1	00000000	3269T783	00000

Adjustable Gantry Cranes for Rough Surfaces

Roll these cranes over grass, gravel, and even mud to lift heavy loads. Equipped with air-filled wheels, they absorb shock better than any of our other gantry cranes, moving smoothly across rough and uneven surfaces. The wheels are butyl rubber for traction even when it’s slick. Made of aluminum, these cranes are strong but lightweight. They resist corroding in the rain and other wet conditions. Lock the wheels to secure these cranes in place. They are not meant to be moved while under load.

Suitable for a wide range of spaces, these cranes also have a beam you can adjust depending on how much vertical clearance you need. Raise the beam to lift large loads or lower it if overhead space is tight. Attach a manual or motorized trolley to the beam to move a load along the length of the span.

Warning: Never use to lift people or items over people.

				Overall			Beam
	Wt. Cap.	Clearance, ft.	Clearance Adjustment Increments	Lg., ft.	Wd.	Ht.	Wd.	Ht.	Type	Wheel Configuration	Brake Type	Wheel Material	Specs. Met		Each
Aluminum







				78" Span

				2 ton, 4,000 lb.	6 to 9	6"	8	57"	88" to 118"	4"	8"	Open	Four Swivel Casters	Wheel Brake	Butyl	ASME B30.17, OSHA Compliant 29 CFR 1910.179	7310N108	000000000




						102" Span

						2 ton, 4,000 lb.	8 to 11	6"	10	57"	112" to 142"	4 3/16"	8"	Open	Four Swivel Casters	Wheel Brake	Butyl	ASME B30.17, OSHA Compliant 29 CFR 1910.179	7310N106	00000000

Foundation-Mount Rotating Cranes

Install these cranes with anchor bolts (sold separately) set in a reinforced-concrete foundation. They rotate 360° to maximize floor space. Also known as jib cranes, they consist of a mast, head assembly, and flat beam that accommodates most trolleys. Use the included base plate pattern as a template to properly set anchor bolts into the foundation.

Also Available: Other spans (from 10 ft. up to 20 ft.), capacities (up to 10,000 lbs.), and clearances (up to 20 ft.). Select 3244T999 and choose specifications.

Warning: Never use to lift people or items over people.

Anchor Bolts—Anchor bolts include leveling nuts and securing nuts with washers to hold the mast's base plate.

	Cranes																		Anchor Bolts
			Overall			Beam				For Foundation, ft.
	Wt. Cap.	Clearance, ft.	Lg.	Wd., ft.	Ht.	Wd.	Ht.	Type	Rotation	Lg.	Wd.	Dp.	Fasteners Included	Mounting Hole Dia.	No. of Mounting Holes	Specs. Met		Each	Pkg. Qty.		Pkg.
Yellow Painted Steel







				14 ft. Span

				2 ton, 4,000 lb.	12	184"	4	161"	7"	16 1/8"	Open	360°	7	7	4	No	1 7/16"	12	Cal/OSHA Compliant Title 8 Section 3627, OSHA Compliant 29 CFR 1910.179	3244T53	000000000	12	3244T18	0000000




						16 ft. Span

						2 ton, 4,000 lb.	12	208"	4	162"	7 1/2"	18 1/8"	Open	360°	8	8	4	No	1 7/16"	12	Cal/OSHA Compliant Title 8 Section 3627, OSHA Compliant 29 CFR 1910.179	3244T12	00000000	12	3244T18	000000

Crane Rotation Stops

Rotation stops prevent cranes from turning past a certain point to protect surrounding structures. To install, weld the stop bar to the crane’s mast assembly and the stop angle to the head assembly. Since rotation stops are welded, they’ll permanently limit a crane’s rotation.

	Pair
3244T211	000000

Easy-Store Adjustable Gantry Cranes


Disassembled

These cranes can be quickly broken down into three pieces for convenient transport and storage. The vertical clearance is adjustable. Cranes include a trolley that slides along the beam and has a mounting hole for your lifting device.

Warning: Never use to lift people or items over people.

				Overall			Beam			Hanger Slot					Wheel
	Wt. Cap.	Clearance, ft.	Clearance Adjustment Increments	Lg., ft.	Wd.	Ht.	Wd.	Ht.	Type	Wd.	Ht.	Wheel Configuration	Brake Type	No. of Wheel Brakes	Dia.	Material	Specs. Met		Each
Aluminum







				77" Span

				2 ton, 4,000 lb.	6 to 9	6"	8	51"	84" to 120", 7 ft. to 10 ft.	5"	12"	Open	1.614"	2.402"	Four Swivel Casters	Wheel Brake	4	8"	Phenolic	CMAA Specification No. 74, OSHA Compliant 29 CFR 1910.179	3775T65	000000000




						127" Span

						2 ton, 4,000 lb.	7 to 10	6"	12	55"	8 ft. to 11 ft., 126" to 132"	5"	12"	Open	1.438"	2"	Four Swivel Casters	Wheel Brake	4	8"	Phenolic	CMAA Specification No. 74, OSHA Compliant 29 CFR 1910.179	3775T66	00000000

Casters


Wheel Brake	Wheel Brake and Swivel Lock (Total Lock)

		Wheel
For Wt. Cap., ton	Brake/Lock Type	Dia.	Material		Each
2	Wheel Brake	8"	Phenolic	3775T112	0000000
2	Wheel Brake and Swivel Lock (Total Lock)	8"	Phenolic	3775T114	000000

Battery-Powered Forklift Booms

No more manually tugging and shoving your boom into position—just push a button and the battery-powered hydraulic pump precisely extends and retracts these booms for you. For loads up to 2,000 lbs., you can even move these booms with your load suspended from them. For heavier loads, you’ll need to position them first and then attach your load, but it’s still faster and more precise than manual booms. Operate these booms from a safe distance using the pendant switch.

Note: Capacities are approximate and depend on the type and load capabilities of the forklift used. A forklift with an 8,000 lb. rating is required. Check with the manufacturer of your forklift for load capabilities before using.

Warning: Never use to lift people or items over people.

Horizontally-Telescoping Boom

Pendant Switch on 8-ft. Cord

	Wt. Cap., lb.													For Max. Fork			Hook
	@ 3 ft.	@ 4 ft.	@ 5 ft.	@ 6 ft.	@ 7 ft.	@ 8 ft.	@ 9 ft.	@ 10 ft.	@ 11 ft.	@ 12 ft.	Cap. while Adjusting Lg., lb.	Fork Pocket Spacing Ctr.-to-Ctr.	For Min. Fork Lg.	Wd.	Ht.	Material	Type	Movement	Opening Wd.	First Hook Position, ft.	Lg., ft.	Batteries Included	Battery Charger Included		Each
Pendant Switch on 8-ft. Cord



		8,000	6,600	6,000	5,300	4,600	4,000	3,500	3,000	2,600	2,200	2,000	24"	24"	7 1/4"	2 1/4"	Painted Steel	Latching	Swivel	1", 1 1/4"	3	7 to 12	Yes	Yes	8749N11	000000000

Bulk Bag Lifters

Forklift Entry

Forklift Entry and Lifting Eye

Hook the loops of a bulk bag onto the legs of these lifters to maintain support while a forklift raises the bag. Slide your forks through the pockets on these lifters to attach them to your forklift.

Warning: Never use to lift people or items over people.

Lifting Eye—Lifters with a lifting eye can also connect to a crane or other overhead lifting device.

			Overall		Lifting Eye		For Fork
	Wt. Cap., lb.	Ht.	Lg.	Wd.	Lg.	Wd.	Max. Wd.	Center-to-Center Spread	Material	Color	Specs. Met		Each
Forklift Entry



		4,000	6 5/8"	40"	38 1/4"	—	—	5"	24"	Powder-Coated Steel	Yellow	—	1702N111	0000000


		Forklift Entry and Lifting Eye



				4,000	5 1/8"	40"	53 1/2"	4 3/4"	3/4"	6 1/2"	14 5/8"	Powder-Coated Steel	Blue	ASME B30.20	1702N11	000000

Steel Lifting Beams

Keep long and unbalanced loads stable where overhead space is limited. Unlike spreader beams, which require a chain sling to operate, these beams use a single attachment point to hook onto your crane, hoist, or other lifting device. However, using one attachment point instead of two can cause uneven weight distribution and place more stress on the beam. Capacity is marked on the beam.

Warning: Never use to lift people or items over people.

Beams with Shackles

Beams with shackles have lifting eyes and shackles that adjust with screw pins.

			Lifting Eye		Overall		Fitting Eye
	Wt. Cap., lb.	Spread	Lg.	Wd.	Lg.	Ht.	Lg.	Wd.	No. of Positions	Ctr.-to-Ctr. Adjustments	Specs. Met		Each
Yellow Painted Steel



		4,000	36" to 72"	2 3/8"	1 11/16"	74"	12 1/2"	1 7/8"	1 1/4"	4	6"	ASME B30.20	37615T116	000000000


		4,000	48" to 96"	2 3/8"	1 11/16"	98"	13 1/2"	1 7/8"	1 1/4"	5	6"	ASME B30.20	37615T117	00000000
		4,000	60" to 120"	2 3/8"	1 11/16"	122"	14 1/2"	1 7/8"	1 1/4"	6	6"	ASME B30.20	37615T118	00000000

Beams with Brackets


Shown with One Additional Upper and One Additional Lower Bracket

Beams with brackets give you more control over where your attachment points are than beams with shackles. Adjust them in 2" increments. For even more stability, add upper and lower brackets (sold separately) to create additional lifting points. You can also use them to replace worn or damaged brackets. Upper brackets are for vertical lifting only. Do not use two upper brackets with a 2-leg chain sling.

	Beams													Upper Brackets		Lower Brackets
			Lifting Eye		Overall		Fitting Eye
	Wt. Cap., lb.	Spread	Lg.	Wd.	Lg.	Ht.	Lg.	Wd.	No. of Positions	Ctr.-to-Ctr. Adjustments	Specs. Met		Each		Each		Each
Yellow Painted Steel



		4,000	12" to 72"	5 3/4"	3"	79 1/4"	15 1/8"	4"	2"	16	2"	ASME B30.20	3977T12	0000000	3977T107	0000000	3977T108	0000000

Beams with Brackets and Hand Chain

Beams with brackets and hand chain let you shift the lifting eye to stabilize loads without taking the beam apart to reposition the upper bail. Lower the load to relieve tension, then pull the hand chain to shift the lifting eye up to 13 _1/2" inches to the left or right.

			Lifting Eye		Overall		Fitting Eye
	Wt. Cap., lb.	Spread	Lg.	Wd.	Lg.	Ht.	Lg.	Wd.	No. of Positions	Ctr.-to-Ctr. Adjustments	Chain Lg., ft.	Specs. Met		Each
Blue Painted Steel



		4,000	8" to 72"	2 7/8"	2"	82"	25 3/8"	4"	2"	8	4"	8	ASME B30.20	3977T102	000000000

Beams with Latching Hooks

Beams with latching hooks screw through openings in the bottom of the beam at specific points to adjust the spread. The hooks swivel for easy positioning before a load is applied.

			Lifting Eye		Overall		Hook
	Wt. Cap., lb.	Spread	Lg.	Wd.	Lg.	Ht.	Movement	Opening Wd.	Usable Lg.	No. of Positions	Ctr.-to-Ctr. Adjustments	Specs. Met		Each
Yellow Painted Steel



		4,000	24" to 36"	5"	3"	39"	13 3/4"	Swivel	7/8"	5 5/8"	2	12"	ASME B30.20	3657T319	000000000


		4,000	36" to 48"	5"	3"	51"	13 3/4"	Swivel	7/8"	5 3/8"	2	6"	ASME B30.20	3657T21	00000000
		4,000	48" to 72"	5"	3"	75"	14 3/4"	Swivel	7/8"	1 5/8"	3	6"	ASME B30.20	3657T22	00000000
		4,000	72" to 96"	5"	3"	99"	16 1/2"	Swivel	1"	6 1/8"	3	12"	ASME B30.20	3657T321	00000000
		4,000	96" to 120"	5"	3"	123"	17 1/2"	Swivel	1"	6 1/8"	3	12"	ASME B30.20	3657T322	00000000

Basket Sling Lifting Beams

Hook slings to these beams to cradle your load for steady lifting. They work together to distribute the weight across multiple lifting points. They’re especially useful for lifting bundles of pipe, rods, and other materials that might shift as you lift. You can adjust where the hooks are on the beam based on your load’s center of gravity, so even lopsided objects stay balanced.

Choose a web sling that is long enough to fit around your object and strong enough to support the load.

Warning: Never use to lift people or items over people.

				Lifting Eye		Overall		Hook
	Wt. Cap., lb.	Spread	For Max. Sling Wd.	Lg.	Wd.	Lg.	Ht.	Opening Wd.	Dia.	Ctr.-to-Ctr. Adjustments	Material	Color	Specs. Met		Each
With J-Hooks



		4,000	16" to 72"	4"	5 1/4"	3"	78"	18 3/4"	4 5/16"	1"	4"	Powder-Coated Steel	Blue	ASME B30.20	9332N11	000000000

Spreader Beams

With two lifting points on top instead of one, these beams keep wide and heavy loads more stable than lifting beams. This distributes weight to reduce stress on the beam. However, these beams require more headroom than lifting beams because they attach to a chain sling.

Expand or collapse the beam to fit your load. Hooks at the bottom of the beam swivel for easy positioning before lifting.

Warning: Never use to lift people or items over people.

Beams with Latching Hooks

	Beams																Replacement Hooks		Replacement Slings
			Lifting Eye		Overall		Hook
	Wt. Cap., lb.	Spread	Lg.	Wd.	Lg.	Ht.	Movement	Opening Wd.	Usable Lg.	No. of Positions	Ctr.-to-Ctr. Adjustments	Straight-Link Chain Trade Size	Chain Lg.	Specs. Met		Each		Each		Each
Yellow Powder-Coated Steel



		4,000	72" to 120"	4 5/16"	2 5/16"	75" to 123"	75"	Swivel	7/8"	4 7/8"	54	1"	9/32"	88 3/8"	ASME B30.20	9119N111	000000000	3525T613	0000000	9119N115	0000000


		4,000	144" to 240"	4 5/16"	2 5/16"	147" to 243"	132"	Swivel	7/8"	4 7/8"	102	1"	9/32"	172 1/2"	ASME B30.20	9119N112	00000000	3525T613	000000	9119N116	000000