Outside Micrometers for Wire Crimps
Measure the height of your crimp to confirm the wire connection is secure and accurate in size. These micrometers have a ratchet-stop thimble with a speeder knob to reduce the time it takes to open and close the micrometer. To prevent overtightening, the thimble stops moving once it touches the wire crimp you're measuring. However, the speeder knob will continue turning with a clicking sound.
These micrometers have zero-position memory, also called absolute positioning (ABS), which keeps the spindle in the same position after it is turned off. They have a zero-set button to start measuring at any point along the spindle, like pressing a tare button on a scale.
USB data cable (sold separately) connects micrometers with SPC data output directly to your PC.
10-pin data cables (sold separately) connect the micrometer to a miniprocessor or multiplexer.
Wireless data transmitter and receiver (sold separately) allow you to transmit measurement data from the micrometer to your PC without being tethered by a cable.
Measuring Range | Accuracy | Measuring Increments | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Inch | Metric | Inch | Metric | Inch | Metric | Throat Dp. | Point Angle  | Frame Material | Batteries Included | Features | Manufacturer Model Number | Each | |
Mitutoyo Micrometers | |||||||||||||
Ratchet-Stop Thimble | |||||||||||||
| 0"-0.8" | 0 mm-20 mm | ±0.00015" | ±0.004 mm | 0.00005" | 0.001 mm | 1/4" | 60° | Cast Iron | Yes | Zero-Position Memory (ABS), Zero-Set Button | 342-371-30 | 0000000 | 0000000 |