Mount these terminals on a threaded screw or stud for a more secure connection than spade and hook terminals.

Mount these elongated ring terminals on a range of threaded screw and stud sizes—their connection is more secure than spade or hook terminals.

With a heat-resistant PVDF cover on the barrel, these terminals are best for high-temperature applications where you want to prevent short-circuiting with nearby wire.

When heat is applied, the enclosed solder melts, creating the most secure, electrically conductive, and environmentally sealed connection we offer.

Thicker than standard ring terminals and noninsulated, these terminals are best when you need durability and to easily inspect the wire connection.

A serrated edge on the inside of the ring grips the mounting screw for a secure hold.

Connect wire to a screw or stud at a right angle to fit connections into tight spaces.

Add strength and stability to stranded wire to protect it from damage and speed insertion into terminal blocks.

A plastic cover on the barrel provides electrical insulation to prevent short-circuiting with nearby wire. Convenient for applications that require frequent connections, these terminals slide together and pull apart with ease.

Easy to install, connect, and disconnect, yet difficult to shake loose. These terminals interlock with each other to make a secure connection.

The connection tab on these terminals is completely covered with insulation, leaving no metal exposed when mated.

The connection tab on these terminals is completely covered with insulation, leaving no metal exposed when mated. When heat is applied, the insulation shrinks, forming a seal to keep out water and contaminants. The enclosed solder also melts when heated, creating the most secure and electrically conductive connection we offer.

Rated UL 94 V-0 for flame resistance, these terminals are made of flame-retardant, self-extinguishing material to reduce the risk of fire.

The connection tab on these terminals is completely covered with insulation, leaving no metal exposed when mated.

These terminals withstand temperatures up to 900° F.

A plastic cover on the barrel provides electrical insulation.

Loosen your mounting screw to install—the open end eliminates the need to completely remove it.

When heat is applied, the enclosed solder melts and the insulation shrinks, creating the most secure, electrically conductive, and environmentally sealed connection we offer.

Connect wire to a screw or stud at a right angle to fit connections into tight spaces.

These solid pins make it easier to insert stranded wire into screw-clamp connections.

Also known as bullet terminals, these have a round tab that requires less space than the flat tab found on most quick-disconnect terminals.

A hybrid of ring and spade terminals, these install without removing the mounting screw, yet resist being pulled off.

A plastic cover fully insulates these splices.

Visually confirm your connection through the inspection window in the insulation of these splices.

The most secure, electrically conductive, and environmentally sealed connection we offer, these splices have enclosed solder that melts when heat is applied.

Able to withstand temperatures up to 900°F, these splices are suitable for use in high-heat applications such as ovens, motors, and light fixtures.

Filled with grease, these splices resist moisture and corrosion.

When heat is applied, adhesive-lined insulation shrinks and bonds to the wires, creating a watertight seal.

A plastic cover fully insulates these splices.

Pierce the insulation of wire without stripping it to make quick connections that are also sealed to keep out water.

Twist stripped wires together, insert them into the connector, and then crimp for a dependable connection.

Use a single splice to connect more than two wires.

Connect one wire to two wires of the same size. When heat is applied, adhesive-lined insulation shrinks and bonds to the wires, creating a moisture- and corrosion-resistant seal.

Tap a main wire or add a finished terminal to the end of a wire.

Keep a variety of quick-disconnect terminal sizes on hand.

Keep a variety of ring terminal sizes on hand.

Slide these lugs onto cable and strike them with your hammer to create a durable connection.

Use these sleeves for non-lifting applications such as tethering, securing, and suspending.

These kits include two compression sleeves paired with two thimbles. The thimbles support the wire rope loops and prevent it from fraying.

Also known as socket-end swage fittings, install these eye-end fittings with a roller swage press for a strong, permanent hold.

Also known as socket-end swage fittings, install these clevis-end fittings with a roller swage press for a strong, permanent hold.

Compress sleeves with less effort than standard compression tools.

Permanently mount this press on a bench top.