Build-Your-Own Fixed Work Platforms
Configure a work platform to fit your application. Made of aluminum, these platforms are lightweight and corrosion resistant. Platform and steps are serrated for maximum slip resistance.
First, determine how high your work platform needs to be and choose the stairs that accommodate that height. Then, choose a platform section based on the desired length. Next, choose platform supports that correspond to the height of your stairs—each end of the platform must be supported by a platform support. Finally, choose handrails for the stairs and platform. Assembled work platforms should be secured to a supporting surface (mounting hardware not included).
Note: Work platforms meet OSHA dimensional standards. Users are responsible for checking local, state, and federal codes, including OSHA, for safe installation and operating practices. Work platforms also meet CAL-OSHA standards, which is required for use in California.
Step | Mounting Holes | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Platform Ht. | Ground Clearance Ht. | No. of Steps | Wd. | Dp. | Tread | Climbing Angle | Cap., lbs. | Assembled or Unassembled | Mounting Hardware Included | No. of | Dia. | Specifications Met | Each | |
Aluminum  | ||||||||||||||
| 54" | 50" | 5 | 24" | 9 1/2" | Serrated | 45° | 500 | Unassembled | No | 4 | 7/16" | ANSI/ASSE A1264.1, Cal/OSHA Compliant Title 8 Section 3209, Cal/OSHA Compliant Title 8 Section 3622, OSHA Compliant 29 CFR 1910 Subpart D | 0000000 | 0000000 |
Fixed Work Platforms
Install these platforms for easy access to elevated areas. They’re large enough to provide plenty of space for working. Platform and steps are serrated for maximum slip resistance and to allow dirt and debris to fall through. Without work boots, standing on them for extended periods may be uncomfortable. The number of steps listed includes the platform.
Style 6 have a hinged access panel that you can flip up and remove to inspect and maintain nearby machinery, such as conveyor systems.
Note: Work platforms meet OSHA and Cal/OSHA dimensional and construction standards. Check local, state, and federal codes, including OSHA, for safe set up and operating practices.
Also Available: Other platform sizes. Please select 8031T999 and specify style number, platform size, and platform height.
Overall | Step | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Platform Ht. (A) | Ground Clearance Ht. (B) | No. of Steps | Cap., lbs. | Ht. (C) | Wd. (D) | Dp. (E) | Wd. | Dp. | Assembled or Unassembled | Specifications Met | Each | |
Gray Painted Steel | ||||||||||||
30" Platform Wd. × 30" Platform Dp. | ||||||||||||
| 45" | 41" | 5 | 500 | 3'9" | 42" | 5'8" | 27" | 9 1/2" | Unassembled | Cal/OSHA Compliant Title 8 Section 3234, OSHA Compliant 29 CFR 1910.25 | 0000000 | 000000000 |
| For Style | For Platform Dp. | Each | |
| 6 | 30" | 00000000 | 0000000 |
| For Style | For No. of Steps | Each | |
| 6 | 5 | 00000000 | 0000000 |
| For Style (For Max. Platform Ht.) | Each | |
Support Frames | ||
|---|---|---|
| 6 (45") | 00000000 | 0000000 |
Crossover Bridges
Use these bridges to walk over conveyors, machines, and pipes.
Note: The number of steps listed is the number of steps on each side including platform.
Serrated steps offer excellent slip resistance and an open-grid design that allows dirt and liquids to fall through.
Diamond-plate steps also provide slip resistance but do not allow anything to fall through.
Note: Crossover bridges meet OSHA dimensional standards. Users are responsible for checking local, state, and federal codes, including OSHA, for safe installation and operating practices.
Overall | Ground Clearance | Platform | Step | Mounting Holes | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Ht. (A) | Wd. (B) | Dp. (C) | Ht. (D) | Dp. (E) | Ht. | Wd. | Dp. | Wd. | Dp. | Cap., lbs. | No. of Steps | Handrail Ht. | Mounting Hardware Included | No. of | Dia. | Assembled or Unassembled | Specifications Met | Each | |
Gray Powder-Coated Steel | |||||||||||||||||||
Serrated Steps | |||||||||||||||||||
| 6'10" | 29" | 7'7" | 3'2" | 24 7/8" | 3'4" | 24" | 37" | 24 1/8" | 4 7/8" | 500 | 5 | 42" | No | 4 | 5/8" | Unassembled | OSHA Compliant 29 CFR 1910.23, Cal/OSHA Compliant Title 8 Section 3622 | 0000000 | 000000000 |
| 6'10" | 29" | 8'7" | 3'2" | 36 5/8" | 3'4" | 24" | 49" | 24 1/8" | 4 7/8" | 500 | 5 | 42" | No | 4 | 5/8" | Unassembled | OSHA Compliant 29 CFR 1910.23, Cal/OSHA Compliant Title 8 Section 3622 | 0000000 | 00000000 |
Diamond-Plate Steps | |||||||||||||||||||
| 6'10" | 29" | 7'7" | 3'2" | 24 7/8" | 3'4" | 24" | 37" | 24 1/8" | 4 7/8" | 500 | 5 | 42" | No | 4 | 5/8" | Unassembled | OSHA Compliant 29 CFR 1910.23, Cal/OSHA Compliant Title 8 Section 3622 | 00000000 | 00000000 |
| 6'10" | 29" | 8'7" | 3'2" | 36 5/8" | 3'4" | 24" | 49" | 24 1/8" | 4 7/8" | 500 | 5 | 42" | No | 4 | 5/8" | Unassembled | OSHA Compliant 29 CFR 1910.23, Cal/OSHA Compliant Title 8 Section 3622 | 00000000 | 00000000 |
Corrosion-Resistant Crossover Bridges
Aluminum is a good choice for damp areas and outdoor use. Use these bridges to walk over conveyors, machines, and pipes.
Note: The number of steps listed is the number of steps on each side including platform.
Serrated steps offer excellent slip resistance and an open-grid design that allows dirt and liquids to fall through.
Diamond-plate steps also provide slip resistance but do not allow anything to fall through.
Note: Crossover bridges meet OSHA dimensional standards. Users are responsible for checking local, state, and federal codes, including OSHA, for safe installation and operating practices.
Overall | Ground Clearance | Platform | Step | Mounting Holes | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Ht. (A) | Wd. (B) | Dp. (C) | Ht. (D) | Dp. (E) | Ht. | Wd. | Dp. | Wd. | Dp. | Cap., lbs. | No. of Steps | Handrail Ht. | Mounting Hardware Included | No. of | Dia. | Assembled or Unassembled | Specifications Met | Each | |
Aluminum | |||||||||||||||||||
Serrated Steps | |||||||||||||||||||
| 6'10" | 29" | 7'7" | 3'2" | 24 7/8" | 3'4" | 24" | 37" | 24 1/8" | 4 7/8" | 500 | 5 | 42" | No | 4 | 5/8" | Unassembled | OSHA Compliant 29 CFR 1910.23, Cal/OSHA Compliant Title 8 Section 3622 | 0000000 | 000000000 |
| 6'10" | 29" | 8'7" | 3'2" | 36 5/8" | 3'4" | 24" | 49" | 24 1/8" | 4 7/8" | 500 | 5 | 42" | No | 4 | 5/8" | Unassembled | OSHA Compliant 29 CFR 1910.23, Cal/OSHA Compliant Title 8 Section 3622 | 0000000 | 00000000 |
Diamond-Plate Steps | |||||||||||||||||||
| 6'10" | 29" | 7'7" | 3'2" | 24 7/8" | 3'4" | 24" | 37" | 24 1/8" | 4 7/8" | 500 | 5 | 42" | No | 4 | 5/8" | Unassembled | OSHA Compliant 29 CFR 1910.23, Cal/OSHA Compliant Title 8 Section 3622 | 00000000 | 00000000 |
| 6'10" | 29" | 8'7" | 3'2" | 36 5/8" | 3'4" | 24" | 49" | 24 1/8" | 4 7/8" | 500 | 5 | 42" | No | 4 | 5/8" | Unassembled | OSHA Compliant 29 CFR 1910.23, Cal/OSHA Compliant Title 8 Section 3622 | 00000000 | 00000000 |
Space-Saver Crossover Bridges
Set at a steeper angle than our other crossover bridges, these bridges require less floor space. They let you walk over conveyors, machines, and pipes. However, the steeper incline makes it more difficult to ascend and descend the bridge. Made of steel, these bridges withstand heavy use in most industrial applications. A powder coating adds protection from corrosion.
Style 2 have vertical ladders on both sides, so you can fit wide equipment underneath. The top of each rung is textured for traction. However, the ladders may be challenging to use while carrying materials.
Serrated treads prevent slipping and allow liquids and dirt to pass through. Diamond-plate treads also prevent slipping. However, they do not let liquids and dirt pass through.
Note: Crossover bridges with listed OSHA or Cal/OSHA specifications meet dimensional and construction standards. Check local, state, and federal codes, including OSHA, for safe set up and operating practices.
Overall | Ground Clearance | Platform | Step | Mounting Holes | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Style | Ht. (A) | Wd. (B) | Dp. (C) | Ht. (D) | Dp. (E) | Ht. | Wd. | Dp. | Dia. | Wd. | Dp. | Cap., lbs. | No. of Steps | Handrail Ht. | Mounting Hardware Included | No. of | Dia. | Assembled or Unassembled | Specifications Met | Each | |
Gray Powder-Coated Steel | |||||||||||||||||||||
Flat Step with Serrated Tread | |||||||||||||||||||||
| 1 | 6'10" | 29" | 5'0" | 3'2" | 25 9/16" | 3'4" | 24" | 33" | __ | 24 1/8" | 4 7/8" | 500 | 5 | 42" | No | 4 | 5/8" | Unassembled | __ | 00000000 | 000000000 |
| 1 | 6'10" | 29" | 5'11" | 3'2" | 37 5/16" | 3'4" | 24" | 44" | __ | 24 1/8" | 4 7/8" | 500 | 5 | 42" | No | 4 | 5/8" | Unassembled | __ | 00000000 | 00000000 |
Flat Step with Diamond-Plate Tread | |||||||||||||||||||||
| 1 | 6'10" | 29" | 5'0" | 3'2" | 25 9/16" | 3'4" | 24" | 33" | __ | 24 1/8" | 4 7/8" | 500 | 5 | 42" | No | 4 | 5/8" | Unassembled | __ | 00000000 | 00000000 |
| 1 | 6'10" | 29" | 5'11" | 3'2" | 37 5/16" | 3'4" | 24" | 44" | __ | 24 1/8" | 4 7/8" | 500 | 5 | 42" | No | 4 | 5/8" | Unassembled | __ | 00000000 | 00000000 |
Yellow Powder-Coated Steel | |||||||||||||||||||||
Round Step | |||||||||||||||||||||
| 2 | 8'7" | 29" | 4'5" | 4'11" | 32" | 5' | 24" | 4ft. | 1" | 23 5/8" | __ | 500 | 5 | 43" | Yes | 4 | 9/16" | Unassembled | OSHA Compliant 29 CFR 1910.27 | 0000000 | 00000000 |
| 2 | 8'7" | 29" | 5'5" | 4'11" | 44" | 5' | 24" | 5ft. | 1" | 23 5/8" | __ | 500 | 5 | 43" | Yes | 4 | 9/16" | Unassembled | OSHA Compliant 29 CFR 1910.27 | 0000000 | 00000000 |
Corrosion-Resistant Space-Saver Crossover Bridges
Aluminum is a good choice for damp areas and outdoor use. Set at a steeper angle than our other crossover bridges, these bridges require less floor space. Use them to walk over conveyors, machines, and pipes.
You are responsible for adhering to local, state, and federal safety codes, including OSHA.
Note: The number of steps listed is the number of steps on each side including platform.
Serrated steps offer excellent slip resistance and an open-grid design that allows dirt and liquids to fall through.
Diamond-plate steps also provide slip resistance but do not allow anything to fall through.
Overall | Ground Clearance | Platform | Step | Mounting Holes | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Ht. (A) | Wd. (B) | Dp. (C) | Ht. (D) | Dp. (E) | Ht. | Wd. | Dp. | Wd. | Dp. | Cap., lbs. | No. of Steps | Handrail Ht. | Mounting Hardware Included | No. of | Dia. | Assembled or Unassembled | Each | |
Aluminum | ||||||||||||||||||
Serrated Steps | ||||||||||||||||||
| 6'10" | 29" | 5'0" | 3'2" | 25 9/16" | 3'4" | 24" | 33" | 24 1/8" | 4 7/8" | 500 | 5 | 42" | No | 4 | 5/8" | Unassembled | 00000000 | 000000000 |
| 6'10" | 29" | 5'11" | 3'2" | 37 5/16" | 3'4" | 24" | 44" | 24 1/8" | 4 7/8" | 500 | 5 | 42" | No | 4 | 5/8" | Unassembled | 00000000 | 00000000 |
Diamond-Plate Steps | ||||||||||||||||||
| 6'10" | 29" | 5'0" | 3'2" | 25 9/16" | 3'4" | 24" | 33" | 24 1/8" | 4 7/8" | 500 | 5 | 42" | No | 4 | 5/8" | Unassembled | 00000000 | 00000000 |
| 6'10" | 29" | 5'11" | 3'2" | 37 5/16" | 3'4" | 24" | 44" | 24 1/8" | 4 7/8" | 500 | 5 | 42" | No | 4 | 5/8" | Unassembled | 00000000 | 00000000 |
Freestanding Crossover Bridges
Move these bridges as you update your facility layout. Unlike other crossover bridges, they do not need to be bolted to the floor. Use them to walk over pipes and conveyors. Made of powder-coated steel, these bridges are rust resistant and durable for industrial use. Their one-piece welded design adds even more rigidity and structural strength. Nonskid rubber feet keep them stable when crossing. These bridges have a serrated platform and steps to prevent slipping. They also allow liquids and debris to pass through.
Note: Crossover bridges meet OSHA and Cal/OSHA dimensional and construction standards. Check local, state, and federal codes, including OSHA, for safe set up and operating practices.
Bridges | ||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Overall | Ground Clearance | Platform | Step | Replacement Rubber Nonskid Feet | ||||||||||||||||
| Ht. (A) | Wd. (B) | Dp. (C) | Ht. (D) | Dp. (E) | Ht. | Wd. | Dp. | Wd. | Dp. | Cap., lbs. | No. of Steps | Handrail Ht. | Assembled or Unassembled | Features | Specifications Met | Each | Pkg. Qty. | Pkg. | ||
Gray Powder-Coated Steel | ||||||||||||||||||||
Serrated Steps | ||||||||||||||||||||
| 6'8" | 30" | 7'9" | 4' | 10" | 4'2" | 24" | 24" | 24" | 7" | 350 | 5 | 42" | Assembled | Nonskid Feet | Cal/OSHA Compliant Title 8 Section 3626, OSHA Compliant 29 CFR 1910.23, ANSI A14.7 | 0000000 | 000000000 | 4 | 00000000 | 000000 |
| 6'8" | 30" | 9'8" | 4' | 32" | 4'2" | 24" | 48" | 24" | 7" | 350 | 5 | 42" | Assembled | Nonskid Feet | Cal/OSHA Compliant Title 8 Section 3626, OSHA Compliant 29 CFR 1910.23, ANSI A14.7 | 0000000 | 00000000 | 4 | 00000000 | 00000 |