These platforms are nonconductive fiberglass. Configure them to fit your application. For good slip resistance, platforms are perforated and stairs are grit coated.

First, determine how high your work platform needs to be and choose the stairs that accommodate that height. Then, choose a platform section based on the desired length. Next, choose platform supports that correspond to the height of your stairs—each end of the platform must be supported by a platform support. Finally, choose handrails for the stairs and platform. Assembled work platforms should be secured to a supporting surface.

Platform handrails have built-in toeboards.

Platform supports are required at each end of a platform section. Supports must be used every 60", so 120" long platform sections also require a support in the middle.

Note: Work platforms meet OSHA dimensional standards. Users are responsible for checking local, state, and federal codes, including OSHA, for safe installation and operating practices. Work platforms also meet CAL-OSHA standards, which is required for use in California.

Install these platforms for easy access to elevated areas. They’re large enough to provide plenty of space for working. Platform and steps are serrated for maximum slip resistance and to allow dirt and debris to fall through. Without work boots, standing on them for extended periods may be uncomfortable. The number of steps listed includes the platform.

Styles 1-5 allow you to lower the platform up to 3" by sliding the U-bolts.

Style 1 don’t have handrails, so you can work freely in any direction.

Styles 2 and 3 are open on one side. They’re often used beside conveyors or assembly stations.

Styles 4 and 5 have handrails on multiple sides of the platform to reduce fall risk.

Style 6 have a hinged access panel that you can flip up and remove to inspect and maintain nearby machinery, such as conveyor systems.

Note: Work platforms meet OSHA and Cal/OSHA dimensional and construction standards. Check local, state, and federal codes, including OSHA, for safe set up and operating practices.

Also Available: Other platform sizes. Please select 8031T999 and specify style number, platform size, and platform height.

Equipped with four casters, these platforms are easy to move between work areas. When you stand on these platforms, the spring-loaded casters automatically retract for a stable surface. Serrated treads give you maximum slip resistance and allow liquids and debris to pass through.

Style 3 have a handrail on only one side for unrestricted access to a conveyor or machinery.

Aluminum platforms are lighter weight than steel platforms and resist corrosion.

Note: Work platforms meet OSHA and Cal/OSHA dimensional and construction standards. Check local, state, and federal codes, including OSHA, for safe set up and operating practices.

Use these bridges to walk over conveyors, machines, and pipes.

Note: The number of steps listed is the number of steps on each side including platform.

Serrated steps offer excellent slip resistance and an open-grid design that allows dirt and liquids to fall through.

Diamond-plate steps also provide slip resistance but do not allow anything to fall through.

Note: Crossover bridges meet OSHA dimensional standards. Users are responsible for checking local, state, and federal codes, including OSHA, for safe installation and operating practices.

Aluminum is a good choice for damp areas and outdoor use. Use these bridges to walk over conveyors, machines, and pipes.

Note: The number of steps listed is the number of steps on each side including platform.

Serrated steps offer excellent slip resistance and an open-grid design that allows dirt and liquids to fall through.

Diamond-plate steps also provide slip resistance but do not allow anything to fall through.

Note: Crossover bridges meet OSHA dimensional standards. Users are responsible for checking local, state, and federal codes, including OSHA, for safe installation and operating practices.