McMaster-Carr logo
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Comments
    E-mail address (if you would like a response)
    93 Products

    Corrosion-Resistant Crossover Stairs

    Image of Product. Front orientation. Contains Annotated. Crossover Stairs. Corrosion-Resistant Crossover Stairs.
    Use these stairs to walk over conveyors, machines, and pipes.
    Aluminum—Aluminum is a good choice for damp areas and outdoor use.
    Serrated Step—Serrated steps offer excellent slip resistance and an open-grid design that allows dirt and liquids to fall through.
    Diamond-Tread Step—Diamond tread steps also provide slip resistance but do not allow anything to fall through.
    Number of Steps—The number of steps listed is the number of steps on each side including platform.
    Specifications Met—Crossover stairs meet OSHA dimensional standards. Users are responsible for checking local, state, and federal codes, including OSHA, for safe installation and operating practices.
    Overall
    Ground
    Clearance
    Platform
    Step
    Mounting
    Holes
    Ht.
    (A)
    Wd.
    (B)
    Dp.
    (C)
    Ht.
    (D)
    Dp.
    (E)
    Ht.
    Wd.
    Dp.
    Wd.
    Dp.
    Wt. Cap.,
    lb.
    No. of
    Steps
    Handrail
    Ht.
    Mounting Hardware
    Included
    No.
    of
    Dia.
    Assembly
    Specs. Met
    Each
    Aluminum
     
    Flat Step with Serrated Tread
    74"29"78"30"24 7/8"32"24"37"24 1/8"4 7/8"500442"No45/8"UnassembledOSHA Compliant 29 CFR 1910.23, Cal/OSHA Compliant Title 8 Section 36228198T75000000000
    74"29"90"30"36 5/8"32"24"49"24 1/8"4 7/8"500442"No45/8"UnassembledOSHA Compliant 29 CFR 1910.23, Cal/OSHA Compliant Title 8 Section 36228198T9500000000
    82"29"91"38"24 7/8"40"24"37"24 1/8"4 7/8"500542"No45/8"UnassembledOSHA Compliant 29 CFR 1910.23, Cal/OSHA Compliant Title 8 Section 36228198T7600000000
    82"29"103"38"36 5/8"40"24"49"24 1/8"4 7/8"500542"No45/8"UnassembledOSHA Compliant 29 CFR 1910.23, Cal/OSHA Compliant Title 8 Section 36228198T9600000000
    90"29"105"46"24 7/8"4 ft.24"37"24 1/8"4 7/8"500642"No45/8"UnassembledOSHA Compliant 29 CFR 1910.23, Cal/OSHA Compliant Title 8 Section 36228198T7700000000
    90"29"116"46"36 5/8"4 ft.24"49"24 1/8"4 7/8"500642"No45/8"UnassembledOSHA Compliant 29 CFR 1910.23, Cal/OSHA Compliant Title 8 Section 36228198T9700000000
    98"29"118"54"24 7/8"56"24"37"24 1/8"4 7/8"500742"No45/8"UnassembledOSHA Compliant 29 CFR 1910.23, Cal/OSHA Compliant Title 8 Section 36228198T7800000000
    98"29"130"54"36 5/8"56"24"49"24 1/8"4 7/8"500742"No45/8"UnassembledOSHA Compliant 29 CFR 1910.23, Cal/OSHA Compliant Title 8 Section 36228198T9800000000
     
    Flat Step with Diamond Tread
    74"29"78"30"24 7/8"32"24"37"24 1/8"4 7/8"500442"No45/8"UnassembledOSHA Compliant 29 CFR 1910.23, Cal/OSHA Compliant Title 8 Section 36228273T16100000000
    74"29"90"30"36 5/8"32"24"49"24 1/8"4 7/8"500442"No45/8"UnassembledOSHA Compliant 29 CFR 1910.23, Cal/OSHA Compliant Title 8 Section 36228273T35100000000
    82"29"91"38"24 7/8"40"24"37"24 1/8"4 7/8"500542"No45/8"UnassembledOSHA Compliant 29 CFR 1910.23, Cal/OSHA Compliant Title 8 Section 36228273T17100000000
    82"29"103"38"36 5/8"40"24"49"24 1/8"4 7/8"500542"No45/8"UnassembledOSHA Compliant 29 CFR 1910.23, Cal/OSHA Compliant Title 8 Section 36228273T36100000000
    90"29"105"46"24 7/8"4 ft.24"37"24 1/8"4 7/8"500642"No45/8"UnassembledOSHA Compliant 29 CFR 1910.23, Cal/OSHA Compliant Title 8 Section 36228273T18100000000
    90"29"116"46"36 5/8"4 ft.24"49"24 1/8"4 7/8"500642"No45/8"UnassembledOSHA Compliant 29 CFR 1910.23, Cal/OSHA Compliant Title 8 Section 36228273T37100000000
    98"29"118"54"24 7/8"56"24"37"24 1/8"4 7/8"500742"No45/8"UnassembledOSHA Compliant 29 CFR 1910.23, Cal/OSHA Compliant Title 8 Section 36228273T19100000000
    98"29"130"54"36 5/8"56"24"49"24 1/8"4 7/8"500742"No45/8"UnassembledOSHA Compliant 29 CFR 1910.23, Cal/OSHA Compliant Title 8 Section 36228273T38100000000
     

    Crossover Stairs

    Image of Product. Front orientation. Contains Annotated. Crossover Stairs. Crossover Stairs.
    Use these stairs to walk over conveyors, machines, and pipes.
    Serrated Step—Serrated steps offer excellent slip resistance and an open-grid design that allows dirt and liquids to fall through.
    Diamond-Tread Step—Diamond tread steps also provide slip resistance but do not allow anything to fall through.
    Number of Steps—The number of steps listed is the number of steps on each side including platform.
    Specifications Met—Crossover stairs meet OSHA dimensional standards. Users are responsible for checking local, state, and federal codes, including OSHA, for safe installation and operating practices.
    Overall
    Ground
    Clearance
    Platform
    Step
    Mounting
    Holes
    Ht.
    (A)
    Wd.
    (B)
    Dp.
    (C)
    Ht.
    (D)
    Dp.
    (E)
    Ht.
    Wd.
    Dp.
    Wd.
    Dp.
    Wt. Cap.,
    lb.
    No. of
    Steps
    Handrail
    Ht.
    Mounting Hardware
    Included
    No.
    of
    Dia.
    Assembly
    Specs. Met
    Each
    Gray Powder-Coated Steel
     
    Flat Step with Serrated Tread
    74"29"78"30"24 7/8"32"24"37"24 1/8"4 7/8"500442"No45/8"UnassembledOSHA Compliant 29 CFR 1910.23, Cal/OSHA Compliant Title 8 Section 36228198T71000000000
    74"29"90"30"36 5/8"32"24"49"24 1/8"4 7/8"500442"No45/8"UnassembledOSHA Compliant 29 CFR 1910.23, Cal/OSHA Compliant Title 8 Section 36228198T9100000000
    82"29"91"38"24 7/8"40"24"37"24 1/8"4 7/8"500542"No45/8"UnassembledOSHA Compliant 29 CFR 1910.23, Cal/OSHA Compliant Title 8 Section 36228198T7200000000
    82"29"103"38"36 5/8"40"24"49"24 1/8"4 7/8"500542"No45/8"UnassembledOSHA Compliant 29 CFR 1910.23, Cal/OSHA Compliant Title 8 Section 36228198T9200000000
    90"29"105"46"24 7/8"4 ft.24"37"24 1/8"4 7/8"500642"No45/8"UnassembledOSHA Compliant 29 CFR 1910.23, Cal/OSHA Compliant Title 8 Section 36228198T7300000000
    90"29"116"46"36 5/8"4 ft.24"49"24 1/8"4 7/8"500642"No45/8"UnassembledOSHA Compliant 29 CFR 1910.23, Cal/OSHA Compliant Title 8 Section 36228198T9300000000
    98"29"118"54"24 7/8"56"24"37"24 1/8"4 7/8"500742"No45/8"UnassembledOSHA Compliant 29 CFR 1910.23, Cal/OSHA Compliant Title 8 Section 36228198T7400000000
    98"29"130"54"36 5/8"56"24"49"24 1/8"4 7/8"500742"No45/8"UnassembledOSHA Compliant 29 CFR 1910.23, Cal/OSHA Compliant Title 8 Section 36228198T9400000000
     
    Flat Step with Diamond Tread
    74"29"78"30"24 7/8"32"24"37"24 1/8"4 7/8"500442"No45/8"UnassembledOSHA Compliant 29 CFR 1910.23, Cal/OSHA Compliant Title 8 Section 36228273T11100000000
    74"29"90"30"36 5/8"32"24"49"24 1/8"4 7/8"500442"No45/8"UnassembledOSHA Compliant 29 CFR 1910.23, Cal/OSHA Compliant Title 8 Section 36228273T27100000000
    82"29"91"38"24 7/8"40"24"37"24 1/8"4 7/8"500542"No45/8"UnassembledOSHA Compliant 29 CFR 1910.23, Cal/OSHA Compliant Title 8 Section 36228273T12100000000
    82"29"103"38"36 5/8"40"24"49"24 1/8"4 7/8"500542"No45/8"UnassembledOSHA Compliant 29 CFR 1910.23, Cal/OSHA Compliant Title 8 Section 36228273T28100000000
    90"29"105"46"24 7/8"4 ft.24"37"24 1/8"4 7/8"500642"No45/8"UnassembledOSHA Compliant 29 CFR 1910.23, Cal/OSHA Compliant Title 8 Section 36228273T13100000000
    90"29"116"46"36 5/8"4 ft.24"49"24 1/8"4 7/8"500642"No45/8"UnassembledOSHA Compliant 29 CFR 1910.23, Cal/OSHA Compliant Title 8 Section 36228273T29100000000
    98"29"118"54"24 7/8"56"24"37"24 1/8"4 7/8"500742"No45/8"UnassembledOSHA Compliant 29 CFR 1910.23, Cal/OSHA Compliant Title 8 Section 36228273T14100000000
    98"29"130"54"36 5/8"56"24"49"24 1/8"4 7/8"500742"No45/8"UnassembledOSHA Compliant 29 CFR 1910.23, Cal/OSHA Compliant Title 8 Section 36228273T15100000000
     

    Low-Height Crossover Stairs

    Image of Product. Front orientation. Contains Annotated. Crossover Stairs. Low-Height Crossover Stairs, 1 Step.

    1 Step

    Image of Attribute. Front orientation. Contains Annotated. Crossover Stairs. Low-Height Crossover Stairs, 2 Steps.

    2 Steps

    Take the safest, shortest route over pipes and other obstacles near the ground. For stability, bolt these stairs to your floor.
    Powder-Coated Steel—Powder-coated steel stairs are both rust resistant and durable enough to withstand heavy use. They’re yellow, so they are easy to see and reduce tripping risks.
    Aluminum—Aluminum stairs are more corrosion resistant than steel stairs. They’re a good choice for damp areas, including outdoors.
    Serrated Step—The serrated steps and platform prevent slipping and allow liquids and debris to pass through.
    Specifications Met—All stairs meet OSHA and Cal/OSHA dimensional and construction standards. Check local, state, and federal codes, including OSHA, for safe set up and operating practices.
    Overall
    Ground
    Clearance
    Platform
    Step
    Mounting
    Holes
    Ht.
    (A)
    Wd.
    (B)
    Dp.
    (C)
    Ht.
    (D)
    Dp. (E)
    Ht.
    Wd.
    Dp.
    Wd.
    Dp.
    Wt. Cap.,
    lb.
    No. of
    Steps
    Mounting Hardware
    Included
    No.
    of
    Dia.
    Assembly
    Specs. Met
    Each
    Yellow Powder-Coated Steel
     
    Flat Step with Serrated Tread
    9"26 1/2"40"6 1/2"24 9/16"9"25 7/8"29"25 7/8"29"5001No49/16"AssembledOSHA Compliant 29 CFR 1910.23, Cal/OSHA Compliant Title 8 Section 36229146N110000000
    19"26 1/2"51"16"24 9/16"19"25 7/8"29"23 1/2"9 1/2"5002No49/16"AssembledOSHA Compliant 29 CFR 1910.23, Cal/OSHA Compliant Title 8 Section 36229146N12000000
     
    Aluminum
     
    Flat Step with Serrated Tread
    9"26 1/2"40"6 1/2"24 9/16"9"25 7/8"29"25 7/8"29"3001No49/16"AssembledOSHA Compliant 29 CFR 1910.23, Cal/OSHA Compliant Title 8 Section 36229146N13000000
    19"26 1/2"51"16"24 9/16"19"25 7/8"29"23 1/2"9 1/2"3002No49/16"AssembledOSHA Compliant 29 CFR 1910.23, Cal/OSHA Compliant Title 8 Section 36229146N14000000
     

    Fixed Work Platforms

    Image of Product. Front orientation. Contains Annotated. Work Platforms. Fixed Work Platforms, Style 1.
    Image of Product. Front orientation. Contains Annotated. Work Platforms. Fixed Work Platforms, Style 2.
    Image of Product. Front orientation. Contains Annotated. Work Platforms. Fixed Work Platforms, Style 3.

    Style 1

    Style 2

    Style 3

    Image of Product. Front orientation. Contains Annotated. Work Platforms. Fixed Work Platforms, Style 4.
    Image of Product. Front orientation. Contains Annotated. Work Platforms. Fixed Work Platforms, Style 5.

    Style 4

    Style 5

    Install these platforms for easy access to elevated areas. They’re large enough to provide plenty of space for working. Platform and steps are serrated for maximum slip resistance and to allow dirt and debris to fall through. Without work boots, standing on them for extended periods may be uncomfortable.
    Also Available: Other platform sizes. Please select 8031T999 and specify style number, platform size, and platform height.
    Style 1
    Image of Product. Front orientation. Contains Annotated. Work Platforms. Fixed Work Platforms, Style 1.
    Style 1 allows you to lower the platform up to 3" by sliding the U-bolts. They don’t have handrails, so you can work freely in any direction.
    Number of Steps—The number of steps listed includes the platform.
    Specifications Met—Work platforms meet OSHA and Cal/OSHA dimensional and construction standards. Check local, state, and federal codes, including OSHA, for safe set up and operating practices.
    Steps
    Overall
    Platform
    Ht. (A)
    Ground Clearance
    Ht. (B)
    Wt. Cap.,
    lb.
    No.
    of
    Wd.
    Dp.
    Ht.
    (C)
    Wd.
    (D)
    Dp.
    (E)
    Assembly
    Specs. Met
    Each
    Gray Powder-Coated Steel
     
    36" Wide Platform × 39" Deep Platform
    18" to 21"12 1/4" to 15"500236"9 1/2"21"38 1/4"49"UnassembledCal/OSHA Compliant Title 8 Section 3210, Cal/OSHA Compliant Title 8 Section 3273, OSHA Compliant 29 CFR 1910.23, OSHA Compliant 29 CFR 1910.25, OSHA Compliant 29 CFR 1910.288031T80000000
    30" to 33"24 1/4" to 27"500336"9 1/2"33"38 1/4"58"UnassembledCal/OSHA Compliant Title 8 Section 3210, Cal/OSHA Compliant Title 8 Section 3273, OSHA Compliant 29 CFR 1910.23, OSHA Compliant 29 CFR 1910.25, OSHA Compliant 29 CFR 1910.288031T9000000
     
    Replacements for Work Platforms
    Style 2
    Image of Product. Front orientation. Contains Annotated. Work Platforms. Fixed Work Platforms, Style 2.
    Image of Product. Front orientation. Work Platform Connectors. Fixed Work Platforms.

    Replacement

    Connectors

    Style 2 allows you to lower the platform up to 3" by sliding the U-bolts. They are open on one side. They’re often used beside conveyors or assembly stations.
    Number of Steps—The number of steps listed includes the platform.
    Specifications Met—Work platforms meet OSHA and Cal/OSHA dimensional and construction standards. Check local, state, and federal codes, including OSHA, for safe set up and operating practices.
    Platforms
    Replacement
    Connectors
    Steps
    Overall
    Platform
    Ht. (A)
    Ground Clearance
    Ht. (B)
    Wt. Cap.,
    lb.
    No.
    of
    Wd.
    Dp.
    Ht.
    (C)
    Wd.
    (D)
    Dp.
    (E)
    Assembly
    Specs. Met
    Each
    Each
    Gray Powder-Coated Steel
     
    36" Wide Platform × 39" Deep Platform
    18" to 21"12 1/4" to 15"500236"9 1/2"5 ft.38 1/4"49"UnassembledCal/OSHA Compliant Title 8 Section 3210, Cal/OSHA Compliant Title 8 Section 3273, OSHA Compliant 29 CFR 1910.23, OSHA Compliant 29 CFR 1910.25, OSHA Compliant 29 CFR 1910.288031T120000000———0
    24" to 27"18 1/4" to 21"500336"9 1/2"66"38 1/4"58"UnassembledCal/OSHA Compliant Title 8 Section 3210, Cal/OSHA Compliant Title 8 Section 3273, OSHA Compliant 29 CFR 1910.23, OSHA Compliant 29 CFR 1910.25, OSHA Compliant 29 CFR 1910.288031T4100000000———0
    30" to 33"24 1/4" to 27"500336"9 1/2"6 ft.38 1/4"58"UnassembledCal/OSHA Compliant Title 8 Section 3210, Cal/OSHA Compliant Title 8 Section 3273, OSHA Compliant 29 CFR 1910.23, OSHA Compliant 29 CFR 1910.25, OSHA Compliant 29 CFR 1910.288031T4200000000———0
    42" to 45"36 1/4" to 39"500436"9 1/2"7 ft.38 1/4"67"UnassembledCal/OSHA Compliant Title 8 Section 3210, Cal/OSHA Compliant Title 8 Section 3273, OSHA Compliant 29 CFR 1910.23, OSHA Compliant 29 CFR 1910.25, OSHA Compliant 29 CFR 1910.288031T4300000000———0
     
    36" Wide Platform × 77" Deep Platform
    18" to 21"12 1/4" to 15"500236"9 1/2"5 ft.38 1/4"86"UnassembledCal/OSHA Compliant Title 8 Section 3210, Cal/OSHA Compliant Title 8 Section 3273, OSHA Compliant 29 CFR 1910.23, OSHA Compliant 29 CFR 1910.25, OSHA Compliant 29 CFR 1910.288031T52000000008031T139000000
    24" to 27"18 1/4" to 21"500336"9 1/2"66"38 1/4"95"UnassembledCal/OSHA Compliant Title 8 Section 3210, Cal/OSHA Compliant Title 8 Section 3273, OSHA Compliant 29 CFR 1910.23, OSHA Compliant 29 CFR 1910.25, OSHA Compliant 29 CFR 1910.288031T68000000008031T13900000
    30" to 33"24 1/4" to 27"500336"9 1/2"6 ft.38 1/4"95"UnassembledCal/OSHA Compliant Title 8 Section 3210, Cal/OSHA Compliant Title 8 Section 3273, OSHA Compliant 29 CFR 1910.23, OSHA Compliant 29 CFR 1910.25, OSHA Compliant 29 CFR 1910.288031T65000000008031T13900000
    42" to 45"36 1/4" to 39"500436"9 1/2"7 ft.38 1/4"104"UnassembledCal/OSHA Compliant Title 8 Section 3210, Cal/OSHA Compliant Title 8 Section 3273, OSHA Compliant 29 CFR 1910.23, OSHA Compliant 29 CFR 1910.25, OSHA Compliant 29 CFR 1910.288031T44000000008031T13900000
     
    Replacements for Work Platforms
    Style 3
    Image of Product. Front orientation. Contains Annotated. Work Platforms. Fixed Work Platforms, Style 3.
    Image of Product. Front orientation. Work Platform Connectors. Fixed Work Platforms.

    Replacement

    Connectors

    Style 3 allows you to lower the platform up to 3" by sliding the U-bolts. They are open on one side. They’re often used beside conveyors or assembly stations.
    Number of Steps—The number of steps listed includes the platform.
    Specifications Met—Work platforms meet OSHA and Cal/OSHA dimensional and construction standards. Check local, state, and federal codes, including OSHA, for safe set up and operating practices.
    Platforms
    Replacement
    Connectors
    Steps
    Overall
    Platform
    Ht. (A)
    Ground Clearance
    Ht. (B)
    Wt. Cap.,
    lb.
    No.
    of
    Wd.
    Dp.
    Ht.
    (C)
    Wd.
    (D)
    Dp.
    (E)
    Assembly
    Specs. Met
    Each
    Each
    Gray Powder-Coated Steel
     
    36" Wide Platform × 39" Deep Platform
    18" to 21"12 1/4" to 15"500236"9 1/2"5 ft.38 1/4"49"UnassembledCal/OSHA Compliant Title 8 Section 3210, Cal/OSHA Compliant Title 8 Section 3273, OSHA Compliant 29 CFR 1910.23, OSHA Compliant 29 CFR 1910.25, OSHA Compliant 29 CFR 1910.288031T140000000———0
    24" to 27"18 1/4" to 21"500336"9 1/2"66"38 1/4"58"UnassembledCal/OSHA Compliant Title 8 Section 3210, Cal/OSHA Compliant Title 8 Section 3273, OSHA Compliant 29 CFR 1910.23, OSHA Compliant 29 CFR 1910.25, OSHA Compliant 29 CFR 1910.288031T7700000000———0
    30" to 33"24 1/4" to 27"500336"9 1/2"6 ft.38 1/4"58"UnassembledCal/OSHA Compliant Title 8 Section 3210, Cal/OSHA Compliant Title 8 Section 3273, OSHA Compliant 29 CFR 1910.23, OSHA Compliant 29 CFR 1910.25, OSHA Compliant 29 CFR 1910.288031T3100000000———0
    36" to 39"30 1/4" to 33"500436"9 1/2"78"38 1/4"67"UnassembledCal/OSHA Compliant Title 8 Section 3210, Cal/OSHA Compliant Title 8 Section 3273, OSHA Compliant 29 CFR 1910.23, OSHA Compliant 29 CFR 1910.25, OSHA Compliant 29 CFR 1910.288031T7800000000———0
    42" to 45"36 1/4" to 39"500436"9 1/2"7 ft.38 1/4"67"UnassembledCal/OSHA Compliant Title 8 Section 3210, Cal/OSHA Compliant Title 8 Section 3273, OSHA Compliant 29 CFR 1910.23, OSHA Compliant 29 CFR 1910.25, OSHA Compliant 29 CFR 1910.288031T3200000000———0
     
    36" Wide Platform × 77" Deep Platform
    18" to 21"12 1/4" to 15"500236"9 1/2"5 ft.38 1/4"86"UnassembledCal/OSHA Compliant Title 8 Section 3210, Cal/OSHA Compliant Title 8 Section 3273, OSHA Compliant 29 CFR 1910.23, OSHA Compliant 29 CFR 1910.25, OSHA Compliant 29 CFR 1910.288031T24000000008031T139000000
    30" to 33"24 1/4" to 27"500336"9 1/2"6 ft.38 1/4"95"UnassembledCal/OSHA Compliant Title 8 Section 3210, Cal/OSHA Compliant Title 8 Section 3273, OSHA Compliant 29 CFR 1910.23, OSHA Compliant 29 CFR 1910.25, OSHA Compliant 29 CFR 1910.288031T61000000008031T13900000
     
    Replacements for Work Platforms
    Style 4
    Image of Product. Front orientation. Contains Annotated. Work Platforms. Fixed Work Platforms, Style 4.
    Image of Product. Front orientation. Work Platform Connectors. Fixed Work Platforms.

    Replacement

    Connectors

    Style 4 allows you to lower the platform up to 3" by sliding the U-bolts. They have handrails on multiple sides of the platform to reduce fall risk.
    Number of Steps—The number of steps listed includes the platform.
    Specifications Met—Work platforms meet OSHA and Cal/OSHA dimensional and construction standards. Check local, state, and federal codes, including OSHA, for safe set up and operating practices.
    Platforms
    Replacement
    Connectors
    Steps
    Overall
    Platform
    Ht. (A)
    Ground Clearance
    Ht. (B)
    Wt. Cap.,
    lb.
    No.
    of
    Wd.
    Dp.
    Ht.
    (C)
    Wd.
    (D)
    Dp.
    (E)
    Assembly
    Specs. Met
    Each
    Each
    Gray Powder-Coated Steel
     
    36" Wide Platform × 39" Deep Platform
    18" to 21"12 1/4" to 15"500236"9 1/2"5 ft.38 1/4"49"UnassembledCal/OSHA Compliant Title 8 Section 3210, Cal/OSHA Compliant Title 8 Section 3273, OSHA Compliant 29 CFR 1910.23, OSHA Compliant 29 CFR 1910.25, OSHA Compliant 29 CFR 1910.288031T130000000———0
    24" to 27"18 1/4" to 21"500336"9 1/2"66"38 1/4"58"UnassembledCal/OSHA Compliant Title 8 Section 3210, Cal/OSHA Compliant Title 8 Section 3273, OSHA Compliant 29 CFR 1910.23, OSHA Compliant 29 CFR 1910.25, OSHA Compliant 29 CFR 1910.288031T2100000000———0
    30" to 33"24 1/4" to 27"500336"9 1/2"6 ft.38 1/4"58"UnassembledCal/OSHA Compliant Title 8 Section 3210, Cal/OSHA Compliant Title 8 Section 3273, OSHA Compliant 29 CFR 1910.23, OSHA Compliant 29 CFR 1910.25, OSHA Compliant 29 CFR 1910.288031T2200000000———0
     
    36" Wide Platform × 77" Deep Platform
    18" to 21"12 1/4" to 15"500236"9 1/2"5 ft.38 1/4"86"UnassembledCal/OSHA Compliant Title 8 Section 3210, Cal/OSHA Compliant Title 8 Section 3273, OSHA Compliant 29 CFR 1910.23, OSHA Compliant 29 CFR 1910.25, OSHA Compliant 29 CFR 1910.288031T23000000008031T139000000
    24" to 27"18 1/4" to 21"500336"9 1/2"66"38 1/4"95"UnassembledCal/OSHA Compliant Title 8 Section 3210, Cal/OSHA Compliant Title 8 Section 3273, OSHA Compliant 29 CFR 1910.23, OSHA Compliant 29 CFR 1910.25, OSHA Compliant 29 CFR 1910.288031T11000000008031T13900000
    30" to 33"24 1/4" to 27"500336"9 1/2"6 ft.38 1/4"95"UnassembledCal/OSHA Compliant Title 8 Section 3210, Cal/OSHA Compliant Title 8 Section 3273, OSHA Compliant 29 CFR 1910.23, OSHA Compliant 29 CFR 1910.25, OSHA Compliant 29 CFR 1910.288031T62000000008031T13900000
     
    Replacements for Work Platforms
    Style 5
    Image of Product. Front orientation. Contains Annotated. Work Platforms. Fixed Work Platforms, Style 5.
    Image of Product. Front orientation. Work Platform Connectors. Fixed Work Platforms.

    Replacement

    Connectors

    Style 5 allows you to lower the platform up to 3" by sliding the U-bolts. They have handrails on multiple sides of the platform to reduce fall risk.
    Number of Steps—The number of steps listed includes the platform.
    Specifications Met—Work platforms meet OSHA and Cal/OSHA dimensional and construction standards. Check local, state, and federal codes, including OSHA, for safe set up and operating practices.
    Platforms
    Replacement
    Connectors
    Steps
    Overall
    Platform
    Ht. (A)
    Ground Clearance
    Ht. (B)
    Wt. Cap.,
    lb.
    No.
    of
    Wd.
    Dp.
    Ht. (C),
    ft.
    Wd.
    (D)
    Dp.
    (E)
    Assembly
    Specs. Met
    Each
    Each
    Gray Powder-Coated Steel
     
    36" Wide Platform × 39" Deep Platform
    30" to 33"24 1/4" to 27"500336"9 1/2"638 1/4"58"UnassembledCal/OSHA Compliant Title 8 Section 3210, Cal/OSHA Compliant Title 8 Section 3273, OSHA Compliant 29 CFR 1910.23, OSHA Compliant 29 CFR 1910.25, OSHA Compliant 29 CFR 1910.288031T54000000000———0
     
    36" Wide Platform × 77" Deep Platform
    30" to 33"24 1/4" to 27"500336"9 1/2"638 1/4"95"UnassembledCal/OSHA Compliant Title 8 Section 3210, Cal/OSHA Compliant Title 8 Section 3273, OSHA Compliant 29 CFR 1910.23, OSHA Compliant 29 CFR 1910.25, OSHA Compliant 29 CFR 1910.288031T64000000008031T139000000
     
    Replacements for Work Platforms

    Freestanding Crossover Stairs

    Image of Product. Front orientation. Contains Annotated. Crossover Stairs. Freestanding Crossover Stairs.
    Move these stairs as you update your facility layout. Unlike other crossover stairs, they do not need to be bolted to the floor. Use them to walk over pipes and conveyors. Their one-piece welded design adds even more rigidity and structural strength.
    Powder-Coated Steel—Made of powder-coated steel, these stairs are rust resistant and durable for industrial use.
    Serrated Step—These stairs have a serrated platform and steps to prevent slipping. They also allow liquids and debris to pass through.
    Nonskid Feet—Nonskid rubber feet keep them stable when crossing.
    Specifications Met—Crossover stairs meet OSHA and Cal/OSHA dimensional and construction standards. Check local, state, and federal codes, including OSHA, for safe set up and operating practices.
    Crossover Stairs
    Replacement Ladder Feet
    Overall
    Ground
    Clearance
    Platform
    Step
    Ht.
    (A)
    Wd.
    (B)
    Dp.
    (C)
    Ht.
    (D)
    Dp.
    (E)
    Ht.
    Wd.
    Dp.
    Wd.
    Dp.
    Wt. Cap.,
    lb.
    No. of
    Steps
    Handrail
    Ht.
    Assembly
    Features
    Specs. Met
    Each
    Material
    Pkg.
    Qty.
    Pkg.
    Gray Powder-Coated Steel
     
    Flat Step with Serrated Tread
    5 ft.30"58"28"10"30"24"24"24"7"350330"AssembledNonskid FeetCal/OSHA Compliant Title 8 Section 3626, OSHA Compliant 29 CFR 1910.23, ANSI-ASC A14.79834N120000000Rubber
    479975T99000000
    5 ft.30"82"28"32"30"24"48"24"7"350330"AssembledNonskid FeetCal/OSHA Compliant Title 8 Section 3626, OSHA Compliant 29 CFR 1910.23, ANSI-ASC A14.79834N1500000000Rubber
    479975T9900000
    70"30"76"38"10"40"24"24"24"7"350430"AssembledNonskid FeetCal/OSHA Compliant Title 8 Section 3626, OSHA Compliant 29 CFR 1910.23, ANSI-ASC A14.79834N1300000000Rubber
    479975T9900000
    70"30"100"38"32"40"24"48"24"7"350430"AssembledNonskid FeetCal/OSHA Compliant Title 8 Section 3626, OSHA Compliant 29 CFR 1910.23, ANSI-ASC A14.79834N1600000000Rubber
    479975T9900000
    80"30"93"48"10"50"24"24"24"7"350542"AssembledNonskid FeetCal/OSHA Compliant Title 8 Section 3626, OSHA Compliant 29 CFR 1910.23, ANSI-ASC A14.79834N1400000000Rubber
    479975T9900000
    80"30"116"48"32"50"24"48"24"7"350542"AssembledNonskid FeetCal/OSHA Compliant Title 8 Section 3626, OSHA Compliant 29 CFR 1910.23, ANSI-ASC A14.79834N1100000000Rubber
    479975T9900000
     
    back to top