Use these disposable cups for beverages.

Easily grab paper, plastic, and foam drinking cups from these dispensers.

These beakers stand up to the most aggressive chemicals as well as temperatures up to 500° F.

Mix and melt small quantities of powders and chemicals.

This pail has a brass handle that inhibits sparking and is nonmagnetic. It is often used with oil and solvents.

Pails are often used in food-processing applications.

These 300 series stainless steel pails meet NSF/ANSI standards and are commonly used in food-processing applications.

Use these cups with a vacuum system to grip, lift, and move flat materials, such as sheet metal and plastic.

The oval shape of this cup provides a greater surface area than other cups, so it is good for lifting long, thin objects without bending them.

Thread these cups onto your vacuum system to lift and move sanitary items with curves, corners, and uneven surfaces.

Attach these cups to threaded connections on your vacuum system to gently lift bags, plastic film, and other sanitary wrappings.

Lift smooth items, such as glass, plastic, and sheet metal without leaving marks.

These cups maintain their grip even as contents shift and the bag changes shape during lifting.

The bellows on these cups handle items with varied heights and angles better than flat cups.

The bellows on these cups handle items with varied heights and angles better than flat cups.

Press these cups onto unthreaded fittings on your vacuum system to pick up sanitary items with curves, corners, and uneven surfaces.

Press these cups onto unthreaded fittings on your vacuum system to pick up bread, pastries, and other soft material.

With multiple suction ports, these lifters can grip, lift, and move large items with a variety of surfaces.

The flexible balloon-like cup on these lifters use compressed air to grip, lift, and move items with curves, angles, and varied heights.

Connect these fittings to a vacuum cup and compressed air source to create a vacuum generating system.

With robot tool mounts and connectors, these vacuum lifters come ready to attach to robot arms with standard ISO mounting hole patterns.

These lifters have multiple cups to grip, lift, and move large food items as well as other objects with curves, angles, and varied heights in food-processing plants. All of the cups are made of FDA-compliant silicone rubber, so they’re safe for direct contact with food.

Drain static charges from electronics and other sensitive, textured items as you lift and move them with your vacuum system.

Also known as spring plungers, these fittings are spring-loaded to accommodate items with variable heights.

Push down to create a vacuum and grip your items.

For a strong, continuous grip, these lifters have levers to lock them in place.

Made from PTFE plastic, these dippers are more chemical resistant than other plastic dippers.

These U-cup seals create less friction than O-ring-loaded U-cups, so they wear more slowly. Also known as lip seals, U-cups have a sealing lip on both the inside and outside edges, so they can be used for rod and piston sealing.

Also known as loaded-lip seals and PolyPaks, an O-ring secures these U-cups to the rod or piston for better sealing performance at lower pressures than unsupported U-cup seals.

Thread these dispensers directly into bearing housings, pumps, and other machinery. Flip the lever to start and stop flow; turn the dial to adjust flow.

A sealed design prevents contamination in dirty and dusty environments.

Customize these dispensers to serve up to 24 lubrication points from a single location.

Serve multiple lubrication points from a single location.

Mount these directly to your machine—the cup allows oil to gradually pass through to equipment, reducing time spent on manual lubrication.

A sealed design prevents contamination in dirty and dusty environments. Install a line between the reservoir's pressure port and the lubricated equipment to balance pressure.

A solenoid automatically starts and stops flow to dispense lubricant while equipment is running.

Equipped with a flowmeter/totalizer, this dispenser displays both the flow rate and the cumulative flow volume of the oil dispensed.

A needle dispensing tip provides fine control for lubricating small parts.

Deliver a mist of oil using shop air.

Tighten the cover to dispense grease.

For more control over the flow rate of your grease, choose these gas-driven dispensers over spring-driven dispensers. Their continuous flow automatically adjusts based on the dispensing duration you set on their dial (from one to 12 months).

By releasing a precise amount of grease at regular intervals, these motor-driven dispensers make sure your machine always has the right amount of grease.

This dispenser delivers over three times more grease per stroke than our dual-output dispensers.

Great as nonslip feet, thread these rubber suction cups to the bottom of your lightweight equipment.

These baskets have a fine nylon mesh construction and plastic frame.

Organize bottles of various shapes and sizes.

Install these fittings into threaded holes.