Current Clamps | McMaster-Carr

Filter by

Test End Component

AC Current

Measures

Electrical Safety Rating

Display Type

For Fluke Model Number

Certification

C-UL Recognized Component

UL Recognized Component

DC Current

AC Voltage

Measurement Unit

Software Features

Bluetooth Connectivity

Diode Check

Fluke Connect Wireless App

Sound Alert for Continuity

Electrical Connection

Current

Manufacturer Model Number

REACH

AC Calculation

Export Control Classification Number (ECCN)

3A992

EAR99

Batteries Required

Yes

DFARS Specialty Metals

Connection End Shape

Input AC Current

U.S.–Mexico–Canada Agreement (USMCA) Qualifying

Yes

RoHS

Compliant

Compliant with Exemptions

Diagonal Screen Size

Number of Wires

DC Voltage

89 Products

Fluke Wireless Remote-Reading Clamp-on-Jaw Current Meters

Take current measurements from a distance with these high-quality, durable Fluke meters. They wirelessly transmit readings to a separate display. Because the jaws surround a cable, these meters are convenient for taking frequent measurements since you don't have to interrupt the circuit.

The meters work with the Fluke 3000 FC multimeter, a computer with a Fluke pc3000 FC connector plugged in (not included), or a mobile device that has the Fluke Connect app.

True RMS AC Calculation—These true RMS current meters take accurate AC measurements regardless of the load type or sine wave shape. This is important for testing electronic devices that draw current in short pulses that can distort the shape of the wave, such as computers and adjustable-speed drives.

Display Count—Display count is an industry designation and not an actual value. For example, a 1,000-count meter shows numbers up to 999. A higher display count means the meter can give a more precise measurement.

	Test End Component	Jaw Opening	Electrical Safety Rating	Measures	Max. AC Current, amp	Data Log Cap.	Display Count	Includes	Certification	Batteries Included		Each
True RMS AC Calculation



	a3000 FC	Current Clamp	1.33"	CAT III, 600V	AC Current	400	65,000	1,000	—	CSA Certified, CSA-US Certified	Yes	7093K121	0000000


	a3001 FC	Current Loop	10"	CAT IV, 600V	AC Current	2,500	65,000	2,500	Magnetic Hanger	CSA Certified, CSA-US Certified	Yes	7093K221	000000

Clamp-on-Jaw Current Meters

Measure current without interrupting the circuit—jaws surround a cable for testing, making these meters convenient for taking frequent measurements.

Average-Sensing AC Calculation—These current meters are average sensing, so they take accurate AC measurements when testing equipment that has a linear load and draws current in a smooth sine wave, such as standard induction motors.

Display Count—Display count is an industry designation and not an actual value. For example, a 2,000-count meter shows numbers up to 1,999. A higher display count means the meter can give a more precise measurement.

	AC Current	Current Accuracy	Measures	Jaw Opening	Includes	Display Count	Batteries Included		Each
Average-Sensing AC Calculation



	CAT III, 300V	0 amp to 20 amp, 0 amp to 200 amp	2% to 3%	AC Current	1.25"	Carrying Case	2,000	Yes	8264T11	0000000

Fluke Clamp-on-Jaw Multimeters

Jaws surround a cable to test current without interrupting the circuit, making these high-quality, durable Fluke multimeters especially useful for testing high current. They include test leads to perform other electrical tests.

True RMS AC Calculation—True RMS multimeters take accurate AC measurements regardless of the load type or sine wave shape. This is important for testing electronic devices that draw current in short pulses that can distort the shape of the wave, such as computers and adjustable-speed drives.

Multimeters with Calibration Certificate—Multimeters with calibration certificate include a document stating that they have passed a test for accuracy.

Display Count—Display count is an industry designation and not an actual value. For example, a 6,000-count multimeter shows numbers up to 5,999. A higher display count means the multimeter can give a more precise measurement.

	Multimeters															Test Leads
												Multimeters		Multimeters with Calibration Certificate
	Mfr. Model No.	Jaw Opening	Electrical Safety Rating	Measures	Max. AC Voltage, V AC	Max. DC Voltage, V DC	DC Voltage Accuracy	Max. AC Current, amp	Max. DC Current, amp	Display Count	Includes		Each		Each		Pair
True RMS AC Calculation



		325	1.18"	CAT III, 600V; CAT IV, 300V	AC Current, AC Voltage, Capacitance, DC Voltage, Resistance, Temperature	600	600	1%	400	—	6,000	Carrying Case, Temperature Probe, Test Leads	75085K56	0000000	75085K66	0000000	75085K98	000000


		355	2.3"	CAT IV, 600V	AC Current, AC Voltage, DC Current, DC Voltage, Frequency, Resistance	600	1,000	1%	2,000	2,000	10,000	Alligator Clips, Carrying Case, Test Leads, Test Probes	75085K11	00000000	———	0	———	0
		374 FC	1.3"	CAT IV, 600V	AC Current, AC Voltage, Capacitance, DC Current, DC Voltage, Resistance	1,000	1,000	1%	600	600	6,000	Carrying Case, Test Leads	75085K35	000000	75085K81	000000	———	0
		376 FC	1.3"	CAT IV, 600V	AC Current, AC Voltage, Capacitance, DC Current, DC Voltage, Frequency, Resistance	1,000	1,000	1%	2,500	999.9	6,000	Carrying Case, Flexible Current Loop, Test Leads	75085K36	000000	75085K44	000000	———	0
		381	1.34"	CAT IV, 600V	AC Current, AC Voltage, DC Current, DC Voltage, Frequency, Resistance	1,000	1,000	1%	2,500	999.9	6,000	Alligator Clips, Carrying Case, Flexible Current Loop, Removable Wireless Display, Test Leads	75085K13	000000	75085K16	00000000	———	0

Multimeter Cases

		Each
Case for 75085K56 and 75085K66	7093K12	0000000

Clamp-On Multimeter Line Splitters

Determine how much current a device with a two- or three-wire power cord uses without pulling apart the wires. The splitter isolates hot and neutral wires so you can measure AC current in either wire with a clamp-on multimeter.

Max. AC Current, amp	For No. of Wires	Electrical Safety Rating	Certification		Each
15	2, 3	CAT II, 600V	UL Listed, C-UL Listed	7575K83	000000

Current-Sensing Test Leads


Current Loop	Current Clamp

Measure current without interrupting the circuit by connecting these test leads to a multimeter or current meter.

The connection end is a 4 mm banana plug, which is the standard for connecting to a multimeter or current meter.

These test leads step down the sensed current to a level that works with a multimeter or current meter—the signal reduction ratio is the factor by which they reduce current.

	For Max. Cord Dia.	Connection End	AC Current, amp	DC Current, amp	Current Accuracy	Voltage Output Signal Per Amp Supplied	For Current Range	AC Voltage, V AC	Electrical Safety Rating	Freq. Range, kHz	Jaw Opening	Loop Opening	Cord Lg.	Batteries Req.	Batteries Included		Each
Measures AC Current



	Flexible Current Loop	—	Sheathed Standard Banana Plug	5 to 3,000	—	1%	10.000 mV AC, 1.000 mV AC, 1.000 mV DC	5 amp to 300 amp 50 amp to 3,000 amp	1,000	CAT IV, 600V	5 to 40	—	7.6"	78"	Yes	Yes	7575K81	0000000


	Measures AC Current and DC Current



			Current Clamp	1.22"	Sheathed Standard Banana Plug	0 to 1,000	0 to 1,000	1%	1.000 mV AC, 1.000 mV DC	0 amp to 200 amp 0 amp to 1,000 amp	300	CAT III, 300V	0 to 10	1.25"	—	59"	Yes	Yes	65775K79	000000

Meters for Solar Power Systems

Find the best spot for new solar panels or check the performance of existing ones. These tools measure solar power in different ways, helping you comply with IEC 62446-1, a standard for testing, documenting, and maintaining solar panels connected to the grid. The data hold function freezes a measurement on the screen, so you have time to write it down. CE marked, all meet European safety standards.

Solar Irradiance Meter Kits

Solar irradiance meter kits include tools to measure current and voltage, so you can check if your panels are generating the expected power. To test current, position your panel’s wiring within the jaws of the clamp meter. Or, if your wiring is hard to reach or clamp around, attach the flexible AC probe to the clamp meter and loop it around your wiring. Neither method will interrupt your circuit, making frequent measurements possible. To measure voltage, wire the clamp meter’s test leads to your solar panel or power station.

UV Light				Current Range, amp		Voltage Range
Measuring Increments, W/m²	Measurement Range, W/m²	Measurement Accuracy	Temp. Range	AC	DC	AC, V AC	DC, V DC	Data Connection	Batteries Included	Features	Includes		Each
1	0 to 1,400	±5%	-22° F to 212° F -30° C to 100° C	0 to 999.9	0 to 999.9	0 to 1,000	0 to 1,500	3.5 mm Audio, Bluetooth	Yes	Angle Indicator, Compass, Data Hold	Temperature Probe, Voltage/Current Clamp Meter (Rated CAT III 1500 V), 18" Lg. Flexible AC Probe, Magnetic Hanging Strap, Carrying Case	7548N12	000000000

Current Conditioners

Reduce high current flows to levels that work with panel monitors and other electrical measuring equipment.

Feed-Through Housing


Screw-Terminal Wire Connection	Wire Lead Connection

Feed through conditioners with wire leads work with AC current.

													Mounting Holes
	ID	Current Input:Current Output	Input AC Current	Output DC Voltage, V DC	Output Current	Operating DC Voltage, V DC	Wire Connection	Ht.	Wd.	Dp.	Temp. Range, ° F	Fasteners Included	Dia.	No. of	Certification		Each
Power Required



		0.74"	—	0 amp to 2 amp, 0 amp to 5 amp	—	4 mA to 20 mA	24	Screw Terminal	2.18"	3.5"	0.93"	0 to 120	Yes	0.19"	2	UL Listed, C-UL Listed	6583K41	0000000


		0.74"	—	0 amp to 10 amp, 0 amp to 20 amp, 0 amp to 50 amp	—	4 mA to 20 mA	24	Screw Terminal	2.18"	3.5"	0.93"	0 to 120	Yes	0.19"	2	UL Listed, C-UL Listed	6583K42	000000
		0.74"	—	0 amp to 100 amp, 0 amp to 150 amp, 0 amp to 200 amp	—	4 mA to 20 mA	24	Screw Terminal	2.18"	3.5"	0.93"	0 to 120	Yes	0.19"	2	UL Listed, C-UL Listed	6583K43	000000


		Self-Powered



				0.74"	—	0 amp to 10 amp, 0 amp to 20 amp, 0 amp to 50 amp	0 to 5	—	—	Screw Terminal	2.18"	3.5"	0.93"	0 to 120	Yes	0.19"	2	UL Listed, C-UL Listed	6583K22	000000


				0.74"	—	0 amp to 10 amp, 0 amp to 20 amp, 0 amp to 50 amp	0 to 10	—	—	Screw Terminal	2.18"	3.5"	0.93"	0 to 120	Yes	0.19"	2	UL Listed, C-UL Listed	6583K32	000000
				0.74"	—	0 amp to 100 amp, 0 amp to 150 amp, 0 amp to 200 amp	0 to 5	—	—	Screw Terminal	2.18"	3.5"	0.93"	0 to 120	Yes	0.19"	2	UL Listed, C-UL Listed	6583K23	000000
				0.74"	—	0 amp to 100 amp, 0 amp to 150 amp, 0 amp to 200 amp	0 to 10	—	—	Screw Terminal	2.18"	3.5"	0.93"	0 to 120	Yes	0.19"	2	UL Listed, C-UL Listed	6583K33	000000
				1.13"	100:5	—	—	0 amp to 5 amp	—	Wire Leads	2.46"	1.05"	—	0 to 165	—	—	—	UL Recognized Component, C-UL Recognized Component	65795K82	00000
				1.13"	150:5	—	—	0 amp to 5 amp	—	Wire Leads	2.46"	1.05"	—	0 to 165	—	—	—	UL Recognized Component, C-UL Recognized Component	65795K84	00000
				1.13"	200:5	—	—	0 amp to 5 amp	—	Wire Leads	2.46"	1.05"	—	0 to 165	—	—	—	UL Recognized Component, C-UL Recognized Component	65795K85	00000
				1.13"	300:5	—	—	0 amp to 5 amp	—	Wire Leads	2.46"	1.05"	—	0 to 165	—	—	—	UL Recognized Component, C-UL Recognized Component	65795K87	00000
				1.13"	50:5	—	—	0 amp to 5 amp	—	Wire Leads	2.46"	1.05"	—	0 to 165	—	—	—	UL Recognized Component, C-UL Recognized Component	65795K79	00000
				1.13"	80:5	—	—	0 amp to 5 amp	—	Wire Leads	2.46"	1.05"	—	0 to 165	—	—	—	UL Recognized Component, C-UL Recognized Component	65795K81	00000
				2.5"	1000:5	—	—	0 amp to 5 amp	—	Wire Leads	4.7"	1.1"	—	0 to 165	—	—	—	UL Recognized Component, C-UL Recognized Component	65795K93	000000


				2.5"	1200:5	—	—	0 amp to 5 amp	—	Wire Leads	4.7"	1.1"	—	0 to 165	—	—	—	UL Recognized Component, C-UL Recognized Component	65795K94	000000
				2.5"	1500:5	—	—	0 amp to 5 amp	—	Wire Leads	4.7"	1.1"	—	0 to 165	—	—	—	UL Recognized Component, C-UL Recognized Component	65795K95	000000
				2.5"	500:5	—	—	0 amp to 5 amp	—	Wire Leads	4.7"	1.1"	—	0 to 165	—	—	—	UL Recognized Component, C-UL Recognized Component	65795K91	00000
				2.5"	750:5	—	—	0 amp to 5 amp	—	Wire Leads	4.7"	1.1"	—	0 to 165	—	—	—	UL Recognized Component, C-UL Recognized Component	65795K92	00000

Hinged Housing

Hinged conditioners open so you can run a wire through them without cutting the power.

												Mounting Holes
	ID	Input AC Current	Output DC Voltage, V DC	Output Current, mA	Operating DC Voltage, V DC	Wire Connection	Ht.	Wd.	Dp.	Temp. Range, ° F	Fasteners Included	Dia.	No. of	Certification		Each
Power Required



		0.85"	0 amp to 2 amp, 0 amp to 5 amp	—	4 to 20	24	Screw Terminal	2.25"	3.53"	1.19"	0 to 120	Yes	0.19"	2	UL Listed, C-UL Listed	6583K44	0000000


		0.85"	0 amp to 10 amp, 0 amp to 20 amp, 0 amp to 50 amp	—	4 to 20	24	Screw Terminal	2.25"	3.53"	1.19"	0 to 120	Yes	0.19"	2	UL Listed, C-UL Listed	6583K45	000000
		0.85"	0 amp to 100 amp, 0 amp to 150 amp, 0 amp to 200 amp	—	4 to 20	24	Screw Terminal	2.25"	3.53"	1.19"	0 to 120	Yes	0.19"	2	UL Listed, C-UL Listed	6583K46	000000


		Self-Powered



				0.85"	0 amp to 10 amp, 0 amp to 20 amp, 0 amp to 50 amp	0 to 5	—	—	Screw Terminal	2.25"	3.53"	1.19"	0 to 120	Yes	0.19"	2	UL Listed, C-UL Listed	6583K25	000000


				0.85"	0 amp to 10 amp, 0 amp to 20 amp, 0 amp to 50 amp	0 to 10	—	—	Screw Terminal	2.25"	3.53"	1.19"	0 to 120	Yes	0.19"	2	UL Listed, C-UL Listed	6583K35	000000
				0.85"	0 amp to 100 amp, 0 amp to 150 amp, 0 amp to 200 amp	0 to 5	—	—	Screw Terminal	2.25"	3.53"	1.19"	0 to 120	Yes	0.19"	2	UL Listed, C-UL Listed	6583K26	000000
				0.85"	0 amp to 100 amp, 0 amp to 150 amp, 0 amp to 200 amp	0 to 10	—	—	Screw Terminal	2.25"	3.53"	1.19"	0 to 120	Yes	0.19"	2	UL Listed, C-UL Listed	6583K36	000000

Fluke Current-Sensing Test Leads

Current Clamp

Measure current without interrupting the circuit by connecting these test leads to a multimeter or current meter.

The connection end is a 4 mm banana plug, which is the standard for connecting to a multimeter or current meter.

These test leads step down the sensed current to a level that works with a multimeter or current meter—the signal reduction ratio is the factor by which they reduce current.

	Test End	For Max. Cord Dia.	Connection End	AC Current, amp	Current Accuracy	Current Output Signal per amp Supplied, mA	For Current Range	AC Voltage, V AC	Electrical Safety Rating	Freq. Range	Jaw Opening	For Fluke Model No.	Cord Lg.	Batteries Req.		Each
Measures AC Current



	i400	Current Clamp	1.25"	Sheathed Standard Banana Plug	1 to 400	2%	1.000	1 amp to 400 amp	1,000	CAT IV, 600V	5 Hz to 20 kHz	1.25"	27 II, 28 II, 77IV, 83V, 87V, 179, 287, 289, 787, 789, 1577, 1587	59"	No	7575K66	0000000

Current Indicating Rings


Red Light	Wire Lead Connection

Run current-carrying wires through these rings to monitor AC current flow.

Red Light—Rings with a red light illuminate to indicate power.

Wire Lead Connection—Rings with wire lead connections can monitor current from up to 200 ft. away when you attach a remote LED (not included) that illuminates when current is present.

	Current Indicating Rings														Brackets
							Wire Lead
	AC Current, amp	For Max. Wire Dia.	Alert Type	Wire Connection	Requires	Input Power	Lg.	Ga.	Ht.	Wd.	Dp.	Certification		Each		Each
Measures AC Current



		2 to 100	0.31"	Red Light	—	—	Self-Powered	—	—	1.29"	0.46"	0.95"	—	6570K12	000000	———	0


		2 to 100	0.29"	—	Wire Leads	Remote LED	Self-Powered	12"	22	1.04"	0.46"	0.95"	C-UL Recognized Component, UL Recognized Component	6570K6	00000	———	0
		2.5 to 100	0.55"	—	Wire Leads	Remote LED	Self-Powered	24"	20	1.49"	0.52"	1.33"	C-UL Recognized Component, UL Recognized Component	6570K9	00000	6570K11	00000

Bulbs

		Each
Remote Red LED for Rings with Wire Leads (200 ft.Max. Monitoring Distance)	6570K7	000000

Fluke Test Lead Tips

Adapt Fluke test leads to perform electrical tests in tight spaces. Attach these tips to test leads that have 4 mm banana plugs.

									Test End
Mfr. Model No.	For Fluke Model No.	Test End Component	Connection End	AC Voltage, V AC	DC Voltage, V DC	Current, amp	Electrical Safety Rating	Color	Material	Insulation Material		Pair
TP1	83V, 87V, 175, 177, 179, 373, 374, 376, 381, 787, 789, T+PRO, T5-1000, T5-600	Needle Tip	Standard Banana Jack	1,000	1,000	10	CAT II, 1,000V	Black, Red	Stainless Steel	Polypropylene	7053K61	000000

Clamp-on-Jaw Multimeters

Suitable for testing high current, these multimeters have jaws that surround a cable to test without interrupting the circuit. They include test leads to perform other electrical tests.

Average-Sensing AC Calculation—Average-sensing multimeters take accurate AC measurements when testing equipment that has a linear load and draws current in a smooth sine wave, such as standard induction motors.

	Multimeters												Test Leads
	Jaw Opening	Electrical Safety Rating	Measures	Max. AC Voltage, V AC	Max. DC Voltage, V DC	DC Voltage Accuracy	Max. AC Current, amp	Max. DC Current, amp	Display Count	Includes		Each		Pair
Average-Sensing AC Calculation



		1"	CAT III, 600V	AC Current, AC Voltage, Capacitance, DC Voltage, Frequency, Resistance, Temperature	600	600	1%	600	—	4,000	Carrying Case, Temperature Probe, Test Leads	7508K14	0000000	7574K51	000000


		True RMS AC Calculation



				1.18"	CAT III, 600V	AC Current, AC Voltage, Capacitance, DC Current, DC Voltage, Frequency, Resistance, Temperature	750	1,000	0.8%	600	600	6,000	Temperature Probe, Test Leads	7508K13	000000	7508K66	00000


				1.18"	CAT IV, 300V	AC Current, AC Voltage, Capacitance, DC Current, DC Voltage, Frequency, Resistance	600	600	1%	600	600	6,000	Carrying Case, Test Leads	7508K71	000000	7420K44	00000
				1.7"	CAT IV, 600V	AC Current, AC Voltage, Capacitance, DC Voltage, Frequency, Resistance, Temperature	1,000	1,000	1.5%	1,000	—	6,000	Built-In Infrared Temperature Sensor, Carrying Case, Test Leads	7508K19	000000	7508K66	00000
				1.7"	CAT IV, 600V	AC Current, AC Voltage, Capacitance, DC Current, DC Voltage, Frequency, Resistance, Temperature	1,000	1,000	2.0%	1,000	1,000	6,000	Built-In Infrared Temperature Sensor, Carrying Case, Temperature Probe, Test Leads	7508K15	000000	7508K66	00000
				2"	CAT IV, 600V	AC Current, AC Voltage, Capacitance, DC Current, DC Voltage, Frequency, Resistance	1,000	1,000	0.8%	1,000	1,000	6,000	Carrying Case, Test Leads	7508K73	000000	7420K44	00000

High-Current-Monitoring Relays

Prevent AC current overload in equipment such as motors and heaters.

These relays sense current flowing through wires routed through the opening. If the current exceeds a set trip point, the relay trips and starts the adjustable delay timer. After the timer's cycle, the relay cuts power to the equipment to protect against overload. Once current drops below the trip point, the relay allows power to flow again to the equipment.

To determine the current trip range for more than one wire, divide the listed trip range by the number of wires passed through the opening.

	Switch Designation	Resistive Load Current @ AC Voltage	Delay Time Range, sec.	For Max. Wire Dia.	Ht.	Wd.	Dp.	Input AC Voltage, V AC	Wire Connection	Certification	Mount Type	Fasteners Included	Mounting Hole Dia.	No. of Mounting Holes		Each
Measures AC Current



	0.1 to 1	SPDT	10 amp @ 240V AC	0.5 to 6	0.5"	2.13"	3.5"	2.5"	120	Quick-Disconnect Terminal	UL Recognized Component	Screw On	No	0.19"	2	65795K69	0000000


	1 to 10	SPDT	10 amp @ 240V AC	0.5 to 6	0.5"	2.13"	3.5"	2.5"	120	Quick-Disconnect Terminal	C-UL Recognized Component, UL Recognized Component	Screw On	No	0.19"	2	65795K71	000000
	3 to 30	SPDT	10 amp @ 240V AC	0.5 to 6	0.5"	2.13"	3.5"	2.5"	120	Quick-Disconnect Terminal	C-UL Recognized Component, UL Recognized Component	Screw On	No	0.19"	2	65795K72	000000
	6 to 60	SPDT	10 amp @ 240V AC	0.5 to 6	0.5"	2.13"	3.5"	2.5"	120	Quick-Disconnect Terminal	C-UL Recognized Component, UL Recognized Component	Screw On	No	0.19"	2	65795K73	000000
	10 to 100	SPDT	10 amp @ 240V AC	0.5 to 6	0.5"	2.13"	3.5"	2.5"	120	Quick-Disconnect Terminal	C-UL Recognized Component, UL Recognized Component	Screw On	No	0.19"	2	65795K74	000000

Analog Clamp-on-Jaw Multimeters

Measure rapidly changing electrical values more easily than with digital multimeters. Convenient for taking frequent high current measurements, the meters have jaws that surround a cable to test current without interrupting the circuit. Use the included test leads to perform other electrical tests.

									Batteries
	Jaw Opening	Measures	Max. AC Voltage, V AC	Max. DC Voltage, V DC	DC Voltage Accuracy	Max. AC Current, amp	Hardware Features	Includes	Size	Req.		Each
Average-Sensing AC Calculation



		1.5"	AC Current, AC Voltage, DC Voltage, Resistance	600	60	4%	600	Overload Protection	Test Leads	AA	Yes	7615K57	0000000

Batteries

	Pkg. Qty.		Pkg.
AA Batteries	4	71455K53	00000

Fluke Test Lead Sets


Model Number FTPL-1	Model Number TL175

Model Number TL222	Model Number TL224

Model Number TL26A	Model Number TL27

Model Number TL28A	Model Number TL40

Model Number TL71	Model Number TL75

Model Number TL76	Model Number TL910

Connect to Fluke multimeters with a set of red and black test leads.

The connection end is a 4 mm banana plug, which is the standard for connecting to a multimeter.

Mfr. Model No.	For Fluke Model No.	Test End	Connection End	AC Voltage, V AC	DC Voltage, V DC	Current, amp	Electrical Safety Rating	Certification	No. of Cords	Cord Lg.	Color	Test End Material		Pair
FTPL-1	289	Notched Threaded Probe Tip	Sheathed Standard Banana Plug	1,000	1,000	10	CAT IV, 600V	CSA Certified, CSA-US Certified	2	48"	Black, Red	Nickel-Plated Brass	7093K125	0000000
TL175	77IV, 113, 114, 115, 116, 117, 175, 177, 179, 233, 287, 289	Notched Threaded Probe Tip	Sheathed Standard Banana Plug	1,000	1,000	10	CAT IV, 600V	CSA Certified, CSA-US Certified	2	48"	Black, Red	Nickel-Plated Brass	7093K123	00000
TL222	83V, 87V, 787	Sheathed Banana Plug	Sheathed Standard Banana Plug	1,000	1,000	10	CAT III, 1,000V; CAT IV, 600V	CSA Certified, CSA-US Certified	2	60"	Black, Red	Copper	7093K127	00000
TL224	87V, 107, 179, 233, 287, 3000	Sheathed Banana Plug	Sheathed Standard Banana Plug	1,000	1,000	10	CAT III, 1,000V; CAT IV, 600V	CSA Certified, CSA-US Certified	2	60"	Black, Red	Copper	7093K128	00000
TL26A	83V, 87V, 88V/A, 107, 179, 287, 289	Serrated Alligator Clip	Sheathed Standard Banana Plug	30	30	8	—	CSA Certified, CSA-US Certified	2	60"	Black, Red	Nickel-Plated Copper	7093K129	00000
TL27	107, 175, 177, 179, 787	Sheathed Banana Plug	Sheathed Standard Banana Plug	1,000	1,000	10	CAT III, 1,000V	CSA Certified, CSA-US Certified	2	60"	Black, Red	Copper	7093K131	00000
TL28A	88V/A, 107, 175, 177, 179, 287, 289	Serrated Alligator Clip	Sheathed Standard Banana Plug	30	30	10	CAT I, 30V	CSA Certified, CSA-US Certified	2	60"	Black, Red	Copper	7093K132	00000
TL40	83V, 87V, 88V/A, 287, 289, 787	Retractable Probe Tip	Sheathed Standard Banana Plug	600	600	3	CAT II, 600V	CSA Certified, CSA-US Certified	2	48"	Black, Red	Stainless Steel	7093K133	00000
TL71	27 II, 28 II, 83V, 87V, 88V, 114, 115, 116, 117, 175, 177, 179, 233, 787, 789	Notched Probe Tip	Sheathed Standard Banana Plug	1,000	1,000	10	CAT IV, 600V	CSA Certified, CSA-US Certified	2	48"	Black, Red	Nickel-Plated Brass	7093K124	00000
TL75	83V, 87V, 113, 175, 177, 179, 287, 289, 787, 789	Notched Probe Tip	Sheathed Standard Banana Plug	1,000	1,000	10	CAT IV, 600V	CSA Certified, CSA-US Certified	2	48"	Black, Red	Nickel-Plated Brass	75085K98	00000
TL76	87V, 107, 179, 287, 289, 787	Pointed Threaded Probe Tip	Sheathed Standard Banana Plug	1,000	1,000	10	CAT II, 1,000V	CSA Certified, CSA-US Certified	2	48"	Black, Red	Nickel-Plated Brass	7093K134	00000
TL910	83V, 87V, 287, 289, 787	Pointed Probe Tip	Sheathed Standard Banana Plug	1,000	1,000	3	CAT II, 1,000V	CSA Certified, CSA-US Certified	2	40"	Black, Red	Gold-Plated Copper	7093K126	00000

DIN-Rail Mount Current Conditioners

Ready to mount on DIN rail, these conditioners reduce high AC current, creating an output signal that can be used by panel monitors and other electrical measuring equipment.

They have true RMS sensing capability for accurate readings of the AC input current.

													Mounting Holes
	Input AC Current, amp	Output Current, mA	Output DC Voltage, V DC	Operating DC Voltage, V DC	ID	AC Calculation	Wire Connection	Ht.	Wd.	Dp.	Temp. Range, ° F	Fasteners Included	Dia.	No. of	Electrical Safety Rating	Certification		Each
Feed-Through Housing



		0 to 10	—	0 to 5	24	0.79"	True RMS	Screw Terminal	2.99"	1.42"	3.27"	32 to 140	No	0.14"	2	CAT II, 600V	UL Recognized Component, C-UL Recognized Component	6733T111	0000000


		0 to 10	4 to 20	—	24	0.79"	True RMS	Screw Terminal	2.99"	1.42"	3.27"	32 to 140	No	0.14"	2	CAT II, 600V	UL Recognized Component, C-UL Recognized Component	6733T121	000000
		0 to 20	—	0 to 5	24	0.79"	True RMS	Screw Terminal	2.99"	1.42"	3.27"	32 to 140	No	0.14"	2	CAT II, 600V	UL Recognized Component, C-UL Recognized Component	6733T112	000000
		0 to 20	4 to 20	—	24	0.79"	True RMS	Screw Terminal	2.99"	1.42"	3.27"	32 to 140	No	0.14"	2	CAT II, 600V	UL Recognized Component, C-UL Recognized Component	6733T122	000000
		0 to 50	—	0 to 5	24	0.79"	True RMS	Screw Terminal	2.99"	1.42"	3.27"	32 to 140	No	0.14"	2	CAT II, 600V	UL Recognized Component, C-UL Recognized Component	6733T113	000000
		0 to 50	4 to 20	—	24	0.79"	True RMS	Screw Terminal	2.99"	1.42"	3.27"	32 to 140	No	0.14"	2	CAT II, 600V	UL Recognized Component, C-UL Recognized Component	6733T123	000000
		0 to 100	—	0 to 5	24	0.79"	True RMS	Screw Terminal	2.99"	1.42"	3.27"	32 to 140	No	0.14"	2	CAT II, 600V	UL Recognized Component, C-UL Recognized Component	6733T114	000000
		0 to 100	4 to 20	—	24	0.79"	True RMS	Screw Terminal	2.99"	1.42"	3.27"	32 to 140	No	0.14"	2	CAT II, 600V	UL Recognized Component, C-UL Recognized Component	6733T124	000000

Current-Monitoring Relays


Screw Terminals Knob Adjustment	Screw Terminals with IO Link, Keypad Adjustment	Spring-Clamp Terminals with IO Link, Keypad Adjustment

Protect electrical equipment from overcurrent and undercurrent damage—these relays continuously monitor current flow. When current is outside a set range, they trip and cut power to prevent overheating, fire hazards, and stalling. Rated IP20, these relays have recessed terminals that keep fingers and other objects from touching live circuits. Mount them on a 35 mm DIN rail (also known as DIN 3 rail) for fast installation.

Spring-Clamp-Terminal Wire Connection—Relays with spring-clamp terminals connect and disconnect to wire without screws. Because there’s no screw, these connections are less likely to loosen over time, even in high-vibration environments.

IO Link Communication Protocol—Relays with IO link can be programmed, monitored, and reset remotely by connecting them to a programmable logic controller (PLC), human-machine interface (HMI), or computer. If you want to program them locally, they have a keypad.

Knob Adjustment—Relays with knob adjustments have knobs right on the front where you can set your trip current. You can see that they're wired correctly and when they're actuated based on the LED indicators.

	Trip Current, amp	Trip Time, sec.	Reset Type	Switching Current @ Voltage	Max. Switching Voltage	Adjustment Mechanism	Ht.	Wd.	Dp.	Digital Display Type		Each
Screw Terminals







	1 Circuit Controlled with 1 Off or 1 On—SPDT

	9	24V AC, 24V DC	0.1 to 1, 0.5 to 5, 0.8 to 8	—	0.1 to 30	Automatic, Manual	5 amp @ 240V AC 5 amp @ 30V DC	250V AC 30V DC	Knob	3.5"	0.9"	3.9"	—	8123N14	0000000


	9	120V AC, 240V AC	0.1 to 1, 0.5 to 5, 0.8 to 8	—	0.1 to 30	Automatic, Manual	5 amp @ 240V AC 5 amp @ 30V DC	250V AC 30V DC	Knob	3.5"	0.9"	3.9"	—	8123N13	000000


	Screw Terminals with IO Link







					1 Circuit Controlled with 1 Off or 1 On—SPDT

					9	24V DC	—	0.05 to 10	0 to 999	Automatic	3 amp @ 240V AC 1 amp @ 24V DC	400V AC 250V DC	External Controller, Keypad	3.6"	0.9"	3.4"	LCD	8123N11	000000


					Spring-Clamp Terminals with IO Link







									1 Circuit Controlled with 1 Off or 1 On—SPDT

									9	24V DC	—	0.05 to 10	0 to 999	Automatic	3 amp @ 240V AC 1 amp @ 24V DC	400V AC 250V DC	External Controller, Keypad	3.8"	0.9"	3.4"	LCD	8123N12	000000