We will reply to your message within an hour.
Typically used for separating work areas such as wash bays, these curtains have a clear center section that allows you to see in as well as out.
Curtains block visibility so they are often used to section off locker rooms, in-plant offices, and other restricted areas.
Use curtains to separate warm and cool-air areas and to create a dust barrier, while still allowing light to pass through.
Use these telescoping poles with tarps, drop cloths, and plastic sheeting up to 8 mils thick to create a sturdy, temporary wall and control dust and debris.
Curtains are clear so workers can see and be seen.
The vinyl coating on these curtains withstands oil.
Cut with scissors to create custom see-through curtains—they have grommets and are ready to hang.
Cut with scissors to create custom curtains—they have grommets and are ready to hang. A vinyl coating provides oil resistance.
Shield workers while allowing them to see and be seen.
The vinyl coating on these panels withstands oil.
Hinges allow you to fold these panels into the desired configuration and the clear panels let workers see and be seen.
Lightweight and flexible enough to roll up and carry, these panels are wire reinforced so they stand on their own. A vinyl coating provides oil resistance.
Combine straight and curved sections to build a hanging one- to four-sided curtain partition.
Everything you need to build a four-sided curtain partition.
You can see and walk through these strip curtains.
Cut with scissors to create custom curtains—they have grommets and are ready to hang.
Hinges allow you to fold these panels into the desired configuration while the clear screens let workers see and be seen.
Lightweight and flexible enough to roll up and carry, these panels are wire reinforced so they stand on their own.
Fold these hinged panels into the configuration you need.
The carbon fibers on one side of these curtains ground electrical charges to eliminate static.
The aluminum on one side of these curtains reflects radiant heat.
These curtains are for intermittent contact with flames and hot surfaces.
Provide excellent chemical resistance with these silica cloth curtains.
Made with Kevlar to resist abrasion, scratches, tears, and punctures.
Blankets are for intermittent contact with flames and hot surfaces.
Allow personnel and vehicles to move freely through doorways while keeping heated or cooled air in and dirt, dust, and debris out.
Create custom doors that allow vehicles and people to move freely, while keeping heated or cooled air in and dirt, dust, and debris out.
Completely block light to maintain darkness and privacy, while allowing traffic to flow freely.
Often hung in freezers, these doors can be used in food-service environments.
These strip doors partially block light.
The strips on these doors have bumpers to prevent scratches, keeping them clear over time so you can see what’s on the other side and avoid collisions.
Use these doors in data centers and other areas where static build-up could harm sensitive electronics.
These strips are ribbed to hide scratches and wear; cut them to length with shears or a utility knife and punch holes for hanging.
The holes are already punched in these strips for convenient installation.
Cut to the length you need with shears or a utility knife and punch holes for hanging.
These door strips have bumpers to prevent scratches, keeping them clear over time so you can see what’s on the other side and avoid collisions.
Replace worn strips or create a custom door with these individual strips. They completely block light to maintain darkness and privacy.
Completely block light with these strip rolls. Cut them to the length you need and punch holes for hanging.
Sized to fit short openings.
Able to handle temperatures up to 500° F, these door strips can be used near ovens and furnaces.
These ribbed door strip rolls hide scratches and wear and can be used in food-service environments.
Cut these strips to the length you need for hanging in freezer doorways or other cold environments.
Cut these partially light-blocking strips to the length you need and punch holes for hanging.
Hang these strips near data centers and other areas where static build-up could harm sensitive electronics.
Cut these strips to the length you need to hang doors for data centers and other areas where static build-up could harm sensitive electronics.
Often hung in freezers, these strips can be used in food-service environments.
These partially light-blocking strips can be used to replace worn strips or create custom strip doors.
Sized to fit short openings, these strip doors are often used with conveyors to prevent the loss of heated or cooled air through unprotected openings.
Suspend these thin sheets to reflect sound and block noise from traveling to other parts of your facility.
Set up these free-standing partitions to reflect sound and block noise from traveling to other parts of your facility. A vinyl barrier is sandwiched between two vinyl-coated fiberglass absorbers.
Reflect sound and block noise from traveling to other parts of your facility.
Made of melamine foam, these sheets meet UL 94 V-0 for flame retardance and ASTM E84 5/20 for flame and smoke. Use them to quiet noisy areas and line machine enclosures. Sheets are peaked on one side for more sound-absorbing area than flat-surface sheets.
These polypropylene foam sheets will not degrade if exposed to moisture and occasional salt water spray. Use them to quiet noisy areas and line machine enclosures.
The best sound absorbers of all our rigid sheets, use to quiet noisy areas in your facility. They're peaked on one side for more sound-absorbing area than flat sheets. Made of melamine, they have an acrylic resin finish that resists dust and dirt and wipes clean.
Furnished with two hangers for easy mounting around your facility, these sheets quiet noisy areas. Made of melamine foam, they are peaked on both sides for good sound absorption in large open spaces.
The foil facing reflects heat. Use these sheets to quiet noisy areas and line machine enclosures. They’re made of humidity-resistant polyurethane foam.
The polyester coating protects these humidity-resistant polyurethane foam sheets from oil exposure. Use them to quiet noisy areas and line machine enclosures.
Also known as egg crate, these sheets have peaks and valleys that absorb more sound at higher frequencies than flat-surface sheets. Use them to quiet noisy areas and line machine enclosures. Sheets are made of humidity-resistant polyurethane foam.
This insulation meets ASTM E162 for flame retardance and ASTM E662 for smoke output. Use to quiet noisy areas and line machine enclosures. Sheets are made of polyimide foam.
Use these sheets to quiet noisy areas and line machine enclosures. They’re made of humidity-resistant polyurethane foam and have a smooth, easy-to-clean facing.
Grommets along one side make it easy to install these sheets around your facility and quiet noisy areas. Made of vinyl-coated fiberglass, they resist abrasion, oil, dirt, moisture, and most solvents.
Create a contaminant-free environment for your critical work with these soft-wall clean rooms.
These curtains have metal grommets for durability.