About Washers
More
About Vibration-Damping Mounts
More
Door Stops for Sliding Doors
Keep sliding doors and panels from damaging walls and door frames. Mount these stops with screws.
Style 1 mounts on doors and panels up to 2 1/4" thick.
For technical drawings and 3-D models, click on a part number.
For Max. Door | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Style | Lg. | Wd. | Ht. | Thick. | Weight, lbs. | Material | Mounting Fasteners Included | Mounting Screw Size | Each | |
Unthreaded Hole | ||||||||||
1 | 8" | 3 1/2" | 2 3/4" | 2 1/4" | 450 | Steel | Yes | 5/16" | 00000000 | 000000 |
Extreme-Force Bolt-Down Vibration-Damping Mounts with Threaded Hole
Spring action provides significant isolation of vibration and noise. These mounts are great for high-impact applications such as punch presses and hammers and machines operating as slowly as 500 rpm. A rubber pad is bonded to the base to limit movement. Use the holes in the base to bolt down these mounts to keep your equipment stationary. Mounts are for use in compression load applications. An adjustment bolt with locking nut lets you use mounts for leveling. For best results, adjust the leveling bolt so the plate is 1/4"-1/2" above the top of the base.
For technical drawings and 3-D models, click on a part number.
Mounts | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mounting Holes | Replacement Springs | |||||||||||||
Thread Size | Thread Lg. | Capacity per Mount, lbs. | Deflection @ Capacity | O'all Ht. | Base Lg. | Base Wd. | Temp. Range, °F | Mounting Fasteners Included | Dia. | Ctr.-to-Ctr. | Each | Each | ||
Steel with Iron Base and Plate and Zinc-Plated Steel Stud | ||||||||||||||
Number of Springs—1 | ||||||||||||||
3/8"-16 | 3" | 50 | 1" | 3.375" | 5.875" | 2.38" | -20° to 180° | No | 0.438" | 5" | 0000000 | 000000 | 0000000 | 00000 |
3/8"-16 | 3" | 100 | 1" | 3.375" | 5.875" | 2.38" | -20° to 180° | No | 0.438" | 5" | 0000000 | 00000 | 0000000 | 0000 |
3/8"-16 | 3" | 150 | 1" | 3.375" | 5.875" | 2.38" | -20° to 180° | No | 0.438" | 5" | 0000000 | 00000 | 0000000 | 0000 |
3/8"-16 | 3" | 250 | 0.83" | 3.375" | 5.875" | 2.38" | -20° to 180° | No | 0.438" | 5" | 0000000 | 00000 | 0000000 | 0000 |
3/8"-16 | 3" | 370 | 0.75" | 3.375" | 5.875" | 2.38" | -20° to 180° | No | 0.438" | 5" | 0000000 | 00000 | 0000000 | 0000 |
3/8"-16 | 3" | 520 | 0.75" | 3.375" | 5.875" | 2.38" | -20° to 180° | No | 0.438" | 5" | 0000000 | 00000 | 0000000 | 00000 |
1/2"-13 | 3 1/2" | 675 | 1.32" | 5.25" | 7.75" | 3" | -20° to 180° | No | 0.625" | 6.5" | 0000000 | 00000 | 0000000 | 00000 |
1/2"-13 | 3 1/2" | 900 | 1.02" | 5.25" | 7.75" | 3" | -20° to 180° | No | 0.625" | 6.5" | 0000000 | 00000 | 0000000 | 00000 |
1/2"-13 | 3 1/2" | 1,200 | 0.9" | 5.25" | 7.75" | 3" | -20° to 180° | No | 0.625" | 6.5" | 0000000 | 00000 | 0000000 | 00000 |
1/2"-13 | 3 1/2" | 1,785 | 0.88" | 5.25" | 7.75" | 3" | -20° to 180° | No | 0.625" | 6.5" | 0000000 | 00000 | 0000000 | 00000 |
Countersunk Washers
Flat and oval head screws sit flush within these washers for a neat, finished appearance.
Nickel-plated steel washers have excellent corrosion resistance and a decorative finish.
For technical drawings and 3-D models, click on a part number.
For Screw Size | ID | OD | Overall Ht. | Countersink Angle | Pkg. Qty. | Pkg. | |
Washers | |||||||
---|---|---|---|---|---|---|---|
Nickel-Plated Steel | |||||||
No. 4 | 0.125" | 0.375" | 0.103" | 82° | 100 | 000000000 | 00000 |
No. 6 | 0.160" | 0.469" | 0.102" | 82° | 100 | 000000000 | 0000 |
No. 8 | 0.180" | 0.531" | 0.120" | 82° | 100 | 000000000 | 0000 |
No. 10 | 0.235" | 0.594" | 0.122" | 82° | 100 | 000000000 | 0000 |
No. 12 | 0.259" | 0.656" | 0.156" | 82° | 100 | 000000000 | 0000 |
1/4" | 0.305" | 0.781" | 0.160" | 82° | 100 | 000000000 | 00000 |
5/16" | 0.391" | 0.906" | 0.188" | 82° | 50 | 000000000 | 00000 |
3/8" | 0.420" | 1.250" | 0.260" | 82° | 25 | 000000000 | 0000 |