Protected by a steel enclosure, these switches withstand tougher conditions than switches in a plastic housing. Also known as safety switches, they have quick-make/quick-break action to eliminate arcing and prolong switch life.

Install these switches in a panel cutout.

Mount these switches inside your enclosure to prevent it from opening when power is on—actuating the switch disconnects power and releases the door.

Rated IP69K, these switches are protected from high-pressure and high-temperature washdowns.

Rated IP66, these switches are protected from washdowns.

Use these switches where ignitable gas and dust may be present. Their contact blocks are UL listed for Class I, Division 2, Groups B, C, and D hazardous locations.

Clearly mark your emergency push-button switches.

Immediately cut power with a single push.

These aluminum switches are rated NEMA 4, NEMA 13, and IP66 for protection from washdowns and oil/coolant spraying.

Immediately cut power by pulling the cable.

Replace access door hinges with these switches; they actuate when the door opens at least 4°.

Delay access to hazardous areas until conditions are safe; use these switches with machines that take time to stop after they are turned off. They mount to a door frame.

Scanning 275° side-to-side for people and objects, these switches (known as safety laser scanners) cover large areas and send signals to machinery to prevent accidents.