McMaster-Carr logo
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    39 Products

    Cut-Protection Arm Sleeves

    Image of ProductInUse. Front orientation. Arm Sleeves. Cut-Protection Arm Sleeves, Standard Sleeve.
    Image of ProductInUse. Front orientation. Arm Sleeves. Cut-Protection Arm Sleeves, Sleeve With Thumb Slot.

    Standard Sleeve

    Sleeve With Thumb Slot

    Image of ProductInUse. Front orientation. Arm Sleeves. Cut-Protection Arm Sleeves, Sleeve With Thumb and Finger Slots.
    Image of ProductInUse. Front orientation. Arm Sleeves. Cut-Protection Arm Sleeves, Sleeve With Thumb Loop and Sleeve Clip.

    Sleeve With Thumb and Finger

    Slots

    Sleeve With Thumb Loop and

    Sleeve Clip

    Use these sleeves alone or with gloves to protect your arms when handling sharp objects. They meet ANSI/ISEA 105 standards for various forms of protection, such as cut, abrasion, and puncture resistance.
    All have an ANSI cut rating, which reflects the amount of force needed to cut through them with a razor blade.
    Sleeve With Thumb Loop and Sleeve Clip—Nylon/polyester/spandex sleeves are thick and durable, so they’re often used for glass manufacturing. They are highly resistant to cuts and abrasion, and they also prevent punctures. Clip them to your sleeve to keep them in place.
    A4—Sleeves with an A4 rating meet the common required minimum in industrial settings. They’re good for jobs involving sharp-edged materials, such as sheet metal and glass.
    A5—Choose A5 when using cutting blades, knives, and sharp wire.
    A7—A7 are ideal when working with sharp metal stamps and presses, as well as food-processing knives.
    A9—Use A9 when handling spikes and bulky objects with sharp edges.
    EN 388—Sleeves that meet EN 388 adhere to European standards for abrasion, tear, cut, and puncture resistance.
    ANSI Rating
    ANSI Cut
    Rating
    Lg.
    Cuff Style
    Material
    Color
    Abrasion
    Puncture
    Specifications Met
    Choose a Size
    Pkg.
    Qty.
    Pkg.
    Standard Sleeve
    A4
    		10"KnitKevlar FabricYellow44
    		ANSI/ISEA 105One Size15615T3100000
    A4
    		10"KnitDyneema FabricGray——ANSI/ISEA 105One Size17847T110000
    A4
    		14"KnitKevlar FabricYellow44
    		ANSI/ISEA 105One Size15615T320000
    A4
    		14"KnitDyneema FabricGray——ANSI/ISEA 105One Size17847T120000
    A4
    		18"KnitKevlar FabricYellow44
    		ANSI/ISEA 105One Size15615T330000
    A4
    		18"KnitDyneema FabricGray——ANSI/ISEA 105One Size17847T130000
    A7
    		18"KnitFiberglass/Polyethylene/Steel FabricBlue42
    		ANSI/ISEA 105, EN 388 (4X41F)S, M, L, XL17989N12300000
    A9
    		18"KnitPolyethylene/Spandex/Steel FabricBlack/Gray——ANSI/ISEA 105XS, S, M, L, XL, 2XL27989N12900000
    A9
    		18"KnitPolyethylene/Spandex/Steel FabricFluorescent Yellow——ANSI/ISEA 105S, M, L, XL, 2XL27989N16500000
    A9
    		22"KnitPolyethylene/Spandex/Steel FabricBlack/Gray——ANSI/ISEA 105S, M, L, XL, 2XL27989N14400000
     
    Sleeve With Thumb Slot
    A4
    		10"KnitKevlar FabricYellow44
    		ANSI/ISEA 105One Size15615T410000
    A4
    		14"KnitKevlar FabricYellow44
    		ANSI/ISEA 105One Size15615T420000
    A4
    		18"KnitKevlar FabricYellow44
    		ANSI/ISEA 105One Size15615T430000
    A5
    		22"Hook and LoopNylon/Polyethylene FabricFluorescent Yellow/Black62
    		ANSI/ISEA 105, EN 388 (4X41D)One Size17989N12800000
    A7
    		18"KnitFiberglass/Polyethylene/Steel FabricBlue42
    		ANSI/ISEA 105, EN 388 (4X41F)S, M, L, XL17989N11700000
    A9
    		12"KnitPolyethylene/Spandex/Steel FabricFluorescent Yellow——ANSI/ISEA 105S, M, L, XL, 2XL27989N15800000
    A9
    		18"KnitPolyethylene/Spandex/Steel FabricBlack/Gray——ANSI/ISEA 105S, M, L, XL, 2XL27989N13700000
    A9
    		18"KnitPolyethylene/Spandex/Steel FabricFluorescent Yellow——ANSI/ISEA 105S, M, L, XL, 2XL27989N17200000
    A9
    		22"KnitPolyethylene/Spandex/Steel FabricBlack/Gray——ANSI/ISEA 105XS, S, M, L, XL, 2XL27989N15100000
     
    Sleeve With Thumb and Finger Slots
    A4
    		10"KnitKevlar FabricYellow44
    		ANSI/ISEA 105One Size15615T510000
    A4
    		14"KnitKevlar FabricYellow44
    		ANSI/ISEA 105One Size15615T520000
    A4
    		18"KnitKevlar FabricYellow44
    		ANSI/ISEA 105One Size15615T530000
     
    Sleeve With Thumb Loop and Sleeve Clip
    A7
    		18"OpenNylon/Polyester/Spandex FabricFluorescent Yellow62
    		ANSI/ISEA 105, EN 388 (4X21F)S, M, L, XL, 2XL17989N11100000
     

    Heat- and Cut-Protection Arm Sleeves

    Image of ProductInUse. Front orientation. Arm Sleeves. Heat- and Cut-Protection Arm Sleeves, Standard Sleeve.
    Image of ProductInUse. Front orientation. Arm Sleeves. Heat- and Cut-Protection Arm Sleeves, Sleeve With Thumb Slot.

    Standard Sleeve

    Sleeve With Thumb Slot

    Image of ProductInUse. Front orientation. Arm Sleeves. Heat- and Cut-Protection Arm Sleeves, Sleeve With Thumb Loop and Sleeve Clip.

    Sleeve With Thumb Loop and

    Sleeve Clip

    Often used in metal fabrication and glass manufacturing, these sleeves protect your arms from cuts and heat. They meet ANSI/ISEA 105 standards for various forms of protection, such as cut, abrasion, puncture, and heat resistance.
    All have an ANSI cut rating, which reflects the amount of force needed to cut through them with a razor blade.
    Sleeve Clip—Sleeves with a clip secure to your shirt to stay in place.
    A4—Sleeves with an A4 rating meet the common required minimum in industrial settings. They’re good for jobs involving sharp-edged materials, such as sheet metal and glass.
    A5—Choose A5 when using cutting blades, knives, and sharp wire.
    A6—Choose A6 when using cutting blades, knives, and sharp wire.
    A7—A7 are ideal when working with sharp metal stamps and presses, as well as food-processing knives.
    EN 388—Sleeves that meet EN 388 adhere to European standards for abrasion, tear, cut, and puncture resistance.
    ANSI Rating
    ANSI Cut
    Rating
    Lg.
    Cuff Style
    Material
    Color
    Abrasion
    Puncture
    Conductive Heat
    Resistance
    Specifications Met
    Choose a Size
    Pkg.
    Qty.
    Pkg.
    Standard Sleeve
    A4
    		18"KnitAramid FabricGreen12
    		2ANSI/ISEA 105XS, S, M, L, XL28359N142000000
     
    Sleeve With Thumb Slot
    A4
    		22"KnitAramid FabricGreen12
    		2ANSI/ISEA 105XS, S, M, L, XL, 2XL28359N14800000
    A5
    		18"Hook and LoopPolyester/Polyethylene/Steel FabricGray/Black32
    		2ANSI/ISEA 105One Size18359N1180000
    A6
    		18"KnitAramid FabricYellow——3ANSI/ISEA 105S, M, L, XL28359N13600000
    A7
    		9"OpenNylon/Polyester/Spandex FabricGray/Fluorescent Yellow63
    		2ANSI/ISEA 105, EN 388 (4X32F)XS, S, M, L, XL, 2XL, 3XL18359N11100000
    A7
    		9"OpenNylon/Polyester/Spandex FabricGray/Black63
    		2ANSI/ISEA 105, EN 388 (4X32F)S, M, L, XL, 2XL, 3XL18359N11900000
     
    Sleeve With Thumb Loop and Sleeve Clip
    A7
    		19"OpenNylon/Polyester/Spandex FabricGray/Fluorescent Yellow63
    		2ANSI/ISEA 105, EN 388 (4X32E)XS, S, M, L, XL, 2XL, 3XL18359N127000000
     

    Arc-Flash-Protection Arm Sleeves

    Image of ProductInUse. Front orientation. Arm Sleeves. Arc-Flash-Protection Arm Sleeves.
    Protect your arms from the heat and flames of electrical arc flashes. These sleeves are tested to ASTM F2675 for arc-flash protection. Their arc rating measures their ability to protect against burns; the higher the arc rating, the greater the flame resistance. Check the minimum arc rating and PPE category provided for your workplace.
    These sleeves also meet ANSI/ISEA 105 standards for cut protection. Rated A5, they are safe to use with cutting blades, knives, and sharp wire.
    Pair
    Arc Rating,
    cal/cm²
    Arc-Rated
    PPE Category
    Lg.
    Cuff
    Style
    Color
    ANSI Cut
    Rating
    Specs. Met
    Choose a Clothing Size (Upper
    Arm Circumference)
    1-11
    12-Up
    Aramid Fabric
    82
    		18"KnitBlueA5
    		ANSI/ISEA 105, ASTM F2675S/M (10 3/4"), L/XL (12")8781N11000000000000
     

    Welding Jackets

    Protect your arms and torso when welding.
    When measuring chest size, measure around the fullest part of your chest. Take all measurements over any clothing you expect to wear under these jackets.
    Cotton Fabric Body with Leather Sleeves
    Image of Product. Cotton and Leather. Front orientation. Jackets. Welding Jackets, Cotton Fabric Body, Blue/Yellow.

    Cotton and Leather

    Cotton and leather protects against low radiant heat with added cut protection and heat resistance on the sleeves. These jackets have a pocket on each sleeve, as well as an inside pocket.
    Lg.
    Material
    Wt., oz.
    Closure
    Method
    Cuff
    Style
    Features
    Color
    Choose a Size (Chest Size)
    Each
    30"9SnapSnapsOne Inside Pocket, Two Sleeve PocketsBlue/YellowS (36"/38"), M (40"/42"), L (44"/46"), XL (48"/50"), 2XL (52"/54"), 3XL (56"/58")5730T41000000
    Leather
    Image of Product. Front orientation. Jackets. Welding Jackets, Leather, Brown.
    Image of Product. Front orientation. Jackets. Welding Jackets, Leather, Gray.

    Brown

    Gray

    Leather protects against radiant heat, flames, and welding sparks. It’s flexible and resists cuts and abrasion better than cotton.
    Brown—Brown leather jackets are designed with small vents under the arms and along the upper back to increase air circulation and cool you off. They have a pocket on each sleeve, as well as an inside pocket.
    Gray—Gray leather jackets have a higher material weight than brown leather jackets to provide better durability and protection.
    Lg.
    Material
    Wt., oz.
    Closure
    Method
    Cuff
    Style
    Features
    Color
    Choose a Size (Chest Size)
    Each
    26"3SnapSnapsOne Inside Pocket, Two Sleeve PocketsBrownS (36"/38"), M (40"/42"), L (44"/46"), XL (48"/50"), 2XL (52"/54")5263T10000000
    30"3SnapSnapsOne Inside Pocket, Two Sleeve PocketsBrownS (36"/38"), M (40"/42"), L (44"/46"), XL (48"/50"), 2XL (52"/54"), 3XL (56"/58")5263T2000000
    30"4SnapSnaps—GrayS (36"/38"), M (40"/42"), L (44"/46"), XL (48"/50"), 2XL (52"/54"), 3XL (56"/58"), 4XL (60"/62")5263T6000000

    Needlestick- and Cut-Protection Arm Sleeves

    Image of ProductInUse. Front orientation. Arm Sleeves. Needlestick- and Cut-Protection Arm Sleeves.
    Snap these sleeves on your forearm to shield from sharp objects and fragments as thin as needles, glass shards, and metal shavings. They meet the ANSI needlestick rating, which rates gloves and sleeves on a scale of 1-5 based on how much force it takes to puncture them with a needle. Higher numbers represent more protection.
    These sleeves meet ANSI/ISEA 105 standards for various forms of protection, such as resistance to cuts, abrasion, punctures, and heat. Their ANSI cut rating reflects how much force is needed to cut through them with a razor blade. At A8, they’re safe to use with spikes and bulky objects with sharp edges. They also meet EN 388, a European standard that rates their resistance to abrasion, cuts, tears, punctures, and impact.
    ANSI Rating
    ANSI Needlestick
    Rating
    ANSI Cut
    Rating
    Lg.
    Cuff
    Style
    Color
    Features
    Abrasion
    Puncture
    Conductive Heat
    Resistance
    Specifications Met
    Choose a Clothing Size (Glove Size)
    Each
    Nylon/Polyester/Spandex Fabric
    2A8
    		8"OpenBlackSpandex Hand43
    		2ANSI/ISEA 105, EN 388 (4X12F)S (7), M (8), L (9), XL (10), 2XL (11)8383N111000000
     

    Chainmail Cut-Protection Arm Sleeves

    Made of interlinked rings, these sleeves protect your arms from cut and puncture wounds. They’re often used for food processing, textile cutting, and sheet metal handling. All meet EN 1082-1, a European standard that measures how well chainmail guards resist penetration from knives. The rings are made of stainless steel to resist corrosion. Each ring is also welded fully shut, so there are no gaps that could trap contaminants.
    Sleeve With Shoulder Cover and Adjustable Chest Strap
    Image of ProductInUse. Sleeve with Shoulder Cover (Front). Front orientation. Arm Sleeves. Chainmail Cut-Protection Arm Sleeves, Sleeve With Shoulder Cover.
    Image of ProductInUse. Sleeve with Shoulder Cover (Back). Back orientation. Arm Sleeves. Chainmail Cut-Protection Arm Sleeves, Sleeve With Shoulder Cover.

    Sleeve with Shoulder Cover (Front)

    Sleeve with Shoulder Cover (Back)

    Sleeves with shoulder cover fit over one arm and shoulder. They’re held in place with an adjustable chest strap.
    Ring
    Dia.
    Cuff
    Style
    Color
    Specs.
    Met
    Choose a Clothing Size (Length/Upper Arm Circumference)
    Each
    Stainless Steel
    1/8"StrapSilverEN 1082-1S (24 1/2"/15 1/2"), M (25 1/2"/16 1/2"), L (26"/17"), XL (27"/17")8369N1160000000
     
    Dual Sleeves With Shoulder Cover
    Image of ProductInUse. Dual Sleeves (Front). Front orientation. Sleeve Dual. Chainmail Cut-Protection Arm Sleeves, Sleeve With Shoulder Cover.
    Image of ProductInUse. Dual Sleeves (Back). Back orientation. Sleeve Dual. Chainmail Cut-Protection Arm Sleeves, Sleeve With Shoulder Cover.

    Dual Sleeves (Front)

    Dual Sleeves (Back)

    Dual sleeves fit over both arms like a T-shirt. Their strapless design makes them easy to put on and take off without help.
    Ring
    Dia.
    Cuff
    Style
    Color
    Specs.
    Met
    Choose a Clothing Size (Length/Upper Arm Circumference/Chest Size)
    Each
    Stainless Steel
    1/8"StrapSilverEN 1082-1S (24 1/2"/15"/36"), M (25 1/2"/17"/40"), L (26"/17 1/2"/44"), XL (27"/18 1/2"/48")8369N1110000000
     

    Welding Cape Sleeves

    Image of Product. Front orientation. Cape Sleeves. Welding Cape Sleeves, Leather.

    Leather

    Protect your arms and chest when welding. Attach a bib (sold separately) to the snaps to protect your stomach.
    When measuring chest size, measure around the fullest part of your chest. Take all measurements over any clothing you expect to wear under these cape sleeves.
    Leather—Leather protects against radiant heat, flames, and welding sparks. It’s flexible and resists cuts and abrasion better than cotton. There is a pocket on the right sleeve.
    Material
    Lg.
    Closure
    Method
    Attachment
    Type
    Cuff
    Style
    Features
    Color
    Choose a Size (Chest Size)
    Each
    Leather14"SnapSnapsSnapsOne Sleeve PocketBrownS (36"/38"), M (40"/42"), L (44"/46"), XL (48"/50"), 2XL (52"/54"), 3XL (56"/58")5340T61000000
    back to top