Make burr-free cuts in a variety of materials—from rubber to metal to stone. Made from a blend of silicon carbide and aluminum oxide abrasives, these cutoff wheels won’t clog or burn when slicing through nonmetals. They’re often used to cut hard or thick pipe, sheets, and bars to size.

Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.

Use these clog-resistant wheels to make quick cuts in soft metal such as aluminum, brass, and copper. Wheels are reinforced with a layer of fiberglass mesh. They are not for use on hand-held saws.

Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.

Ideal when working across multiple materials, these wheels are specially constructed to cut plastic, fiberglass, concrete, and ceramic, as well as metal. They also work with sheet metal. They contain less than 0.1% iron, chloride, and sulfur contaminants to prevent corroding and discoloring stainless steel and other nickel-alloyed steel.

Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.

Swap accessories quickly and safely without tools. These wheels have a special arbor hole that work with a pull-twist-release locking mechanism (sold separately). They are also compatible with standard Dremel wheel arbors with a slotted-head-screw locking mechanism.

No need to change blades when cutting different material—these blades cut through both metal and wood. Their carbide teeth make clean cuts in wood and burr-free cuts in metal. They’re also impact-resistant, so these blades easily slice through wood with nails in it. An aluminum coating reduces heat buildup, keeping these blades cool as you cut. This helps prevent material from burning, deforming, or gumming up your blades, and it also helps keep blades sharp. Anti-vibration vents limit shaking for accurate, stable cuts, and they also reduce cutting noise.

These blades make straight and plunge cuts. Detach the center piece to expose the diamond shape of the arbor.

Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.

Use these clog-resistant zirconia alumina wheels to make quick cuts in soft metal such as aluminum, brass, and copper. Wheels are reinforced with a layer of fiberglass mesh.

Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.

Prevent clogging when cutting soft metal—these blades have plenty of space between the carbide-tipped teeth to allow chips to escape. The blade with multiple arbor diameters comes with a reducer bushing. Choose blades with more teeth for a smoother cut.

Use these clog-resistant wheels to make quick cuts in soft metal such as aluminum, brass, and copper. They are reinforced with two layers of fiberglass mesh. Choose coarser grit for fast cuts; choose finer grit for smooth cuts.

Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.

Also known as Type 27, raised-hub, and depressed-center cutoff wheels, these wheels outperform Type 1 wheels when making flush cuts. They make quick cuts in soft metal such as aluminum, brass and copper without clogging. Wheels are reinforced with two layers of fiberglass mesh.

Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.

Prevent clogging when cutting soft metal—these blades have plenty of space between the carbide-tipped teeth to allow chips to escape.

Cut through metal, plastic, and other materials without having to change blades.

Warning: Use blades that have a greater rpm rating than the no-load rpm of your tool.