These high-density ceramic or ceramic oxide wheels have two layers of fiberglass mesh reinforcement and last up to twice as long as long-life cutoff wheels when cutting iron, stainless steel, and steel.

Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.

Made of ceramic alumina or a combination of ceramic alumina and zirconia alumina, these wheels last up to ten times longer than standard cutoff wheels when cutting hard metal such as Inconel nickel, Hastelloy nickel, and tool steel. Wheels are reinforced with two layers of fiberglass mesh.

Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.

Made of ceramic alumina, these wheels last 10 times longer than standard cutoff wheels when cutting hard metal, such as tool steel. They’re reinforced with two layers of fiberglass mesh. These wheels, also known as Type 27, raised hub, and depressed-center cutoff wheels, outperform Type 1 wheels when making flush cuts.

Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.

The combination of ceramic alumina and zirconia alumina in these wheels lasts up to ten times longer than aluminum oxide when cutting hard metal such as Inconel nickel, Hastelloy nickel, and tool steel. Wheels are reinforced with a layer of fiberglass mesh. Choose coarser grit for fast cuts; choose finer grit for smooth cuts.

Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.

Made of premium grade abrasives, these wheels make fast, burr-free cuts in stainless steel. They’re reinforced with two layers of fiberglass mesh. Choose coarser grit for fast cuts; choose finer grit for smooth cuts.

Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.

Also known as Type 27, raised-hub, and depressed-center cutoff wheels, these wheels outperform Type 1 wheels when making flush cuts. They make fast, burr-free cuts in stainless steel. Wheels are reinforced with two layers of fiberglass mesh. Choose coarser grit for fast cuts; choose finer grit for smooth cuts.

Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.

Two layers of fiberglass mesh reinforcement give these fast-cutting, zirconia alumina wheels at least three times the life of standard cutoff wheels when cutting aluminum, iron, stainless steel, and steel. They are not for use on hand-held saws.

Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.

Use these wheels to cut through metal such as aluminum, iron, stainless steel, and steel. They are reinforced with a layer of fiberglass mesh. Wheels are not for use on hand-held saws.

Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.

Made of premium grade of abrasives, these wheels are strong and thick for making notches in stainless steel. They’re reinforced with two layers of fiberglass mesh. Also known as Type 27, raised-hub, and depressed-center cutoff wheels, these wheels outperform Type 1 wheels when making flush cuts.

Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.

Use these wheels to cut through metal such as aluminum, iron, stainless steel, and steel. They are reinforced with a layer of fiberglass mesh.

Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.

These wheels have a blend of aluminum oxide and silicon carbide abrasives for cutting ductile iron. Wheels are reinforced with a layer of fiberglass mesh. They are not for use on hand-held saws.

Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.

Use these clog-resistant wheels to make quick cuts in soft metal such as aluminum, brass, and copper. Wheels are reinforced with a layer of fiberglass mesh. They are not for use on hand-held saws.

Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.