Angle Grinder Cutoff Wheels for Sheet Metal
Often used on duct, these ultra-thin wheels make fast, clean cuts in thin metal that minimize burrs and discoloration from heat. Also known as Type 27, raised-hub, and depressed-center cutoff wheels, they outperform Type 1 wheels when making flush cuts.
Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.
For technical drawings and 3-D models, click on a part number.
Wheel | Material | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Thick. | Arbor Hole Size | Max. Speed, rpm | Type | Shape | Abrasive | Reinforcement | For Use On | Grit | Each | |
6" Dia. | ||||||||||
| 1/32" | 7/8" | 10,200 | Type 27 | Raised Hub | Zirconia Alumina | Fiberglass Mesh | Stainless Steel, Steel | 60 | 0000000 | 000000 |
7" Dia. | ||||||||||
| 3/64" | 7/8" | 8,600 | Type 27 | Raised Hub | Zirconia Alumina | Fiberglass Mesh | Stainless Steel, Steel | 60 | 0000000 | 00000 |
Angle Grinder Cutoff Wheels for Stainless Steel
Made of premium grade abrasives, these wheels make fast, burr-free cuts in stainless steel. They’re reinforced with two layers of fiberglass mesh. Choose coarser grit for fast cuts; choose finer grit for smooth cuts.
Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.
For technical drawings and 3-D models, click on a part number.
Wheel | Material | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| Thick. | Arbor Hole Size | Max. Speed, rpm | Type | Shape | Abrasive | Reinforcement | Grit | Each | |
4" Dia. | |||||||||
| 0.04" | 5/8" | 15,000 | Type 1 | Straight | Zirconia Alumina | Fiberglass Mesh | 60 | 0000000 | 00000 |
4 1/2" Dia. | |||||||||
| 0.035" | 7/8" | 13,300 | Type 1 | Straight | Zirconia Alumina | Fiberglass Mesh | 60 | 0000000 | 0000 |
5" Dia. | |||||||||
| 0.035" | 7/8" | 12,200 | Type 1 | Straight | Zirconia Alumina | Fiberglass Mesh | 60 | 0000000 | 0000 |
6" Dia. | |||||||||
| 0.04" | 7/8" | 10,200 | Type 1 | Straight | Zirconia Alumina | Fiberglass Mesh | 60 | 0000000 | 0000 |
| 1/16" | 7/8" | 10,185 | Type 1 | Straight | Zirconia Alumina | Fiberglass Mesh | 36 | 0000000 | 0000 |
7" Dia. | |||||||||
| 0.045" | 5/8" | 8,500 | Type 1 | Straight | Zirconia Alumina | Fiberglass Mesh | 60 | 0000000 | 0000 |
| 0.09" | 5/8" | 8,500 | Type 1 | Straight | Zirconia Alumina | Fiberglass Mesh | 60 | 0000000 | 0000 |
Flush-Cut Angle Grinder Cutoff Wheels for Stainless Steel
Also known as Type 27, raised-hub, and depressed-center cutoff wheels, these wheels outperform Type 1 wheels when making flush cuts. They make fast, burr-free cuts in stainless steel. Wheels are reinforced with two layers of fiberglass mesh. Choose coarser grit for fast cuts; choose finer grit for smooth cuts.
Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.
For technical drawings and 3-D models, click on a part number.
Wheel | Material | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Thick. | Arbor Hole Size | Arbor Hole Thread Size  | Max. Speed, rpm | Type | Shape | Abrasive | Reinforcement | Grit | Each | |
4" Dia. | ||||||||||
| 0.04" | 5/8" | __ | 15,000 | Type 27 | Raised Hub | Zirconia Alumina | Fiberglass Mesh | 60 | 00000000 | 00000 |
4 1/2" Dia. | ||||||||||
| 1/32" | 7/8" | __ | 13,300 | Type 27 | Raised Hub | Zirconia Alumina | Fiberglass Mesh | 60 | 00000000 | 0000 |
| 0.045" | __ | 5/8"-11 | 13,300 | Type 27 | Raised Hub | Zirconia Alumina | Fiberglass Mesh | 36 | 00000000 | 0000 |
| 3/32" | __ | 5/8"-11 | 13,300 | Type 27 | Raised Hub | Zirconia Alumina | Fiberglass Mesh | 36 | 00000000 | 00000 |
| 3/32" | 7/8" | __ | 13,300 | Type 27 | Raised Hub | Zirconia Alumina | Fiberglass Mesh | 36 | 00000000 | 0000 |
5" Dia. | ||||||||||
| 1/32" | 7/8" | __ | 12,200 | Type 27 | Raised Hub | Zirconia Alumina | Fiberglass Mesh | 60 | 00000000 | 0000 |
6" Dia. | ||||||||||
| 0.04" | 7/8" | __ | 10,200 | Type 27 | Raised Hub | Zirconia Alumina | Fiberglass Mesh | 60 | 00000000 | 0000 |
| 3/32" | 7/8" | __ | 10,200 | Type 27 | Raised Hub | Zirconia Alumina | Fiberglass Mesh | 30 | 00000000 | 0000 |
9" Dia. | ||||||||||
| 3/32" | __ | 5/8"-11 | 6,600 | Type 27 | Raised Hub | Zirconia Alumina | Fiberglass Mesh | 36 | 00000000 | 00000 |
Angle Grinder Cutoff Wheels for Cutting and Notching Stainless Steel
Made of premium grade of abrasives, these wheels are strong and thick for making notches in stainless steel. They’re reinforced with two layers of fiberglass mesh. Also known as Type 27, raised-hub, and depressed-center cutoff wheels, these wheels outperform Type 1 wheels when making flush cuts.
Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.
For technical drawings and 3-D models, click on a part number.
Angle Grinder Cutoff Wheels for Hard Metal
Made of ceramic alumina or a combination of ceramic alumina and zirconia alumina, these wheels last up to ten times longer than standard cutoff wheels when cutting hard metal such as Inconel, Hastelloy, and tool steel. Wheels are reinforced with two layers of fiberglass mesh.
Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.
For technical drawings and 3-D models, click on a part number.
Wheel | Material | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Thick. | Arbor Hole Size | Max. Speed, rpm | Type | Shape | Abrasive | Reinforcement | For Use On | Grit | Each | |
4 1/2" Dia. | ||||||||||
| 0.045" | 7/8" | 13,580 | Type 1 | Straight | Ceramic Alumina/Zirconia Alumina | Fiberglass Mesh | Inconel, Hastelloy, Tool Steel | 36 | 0000000 | 00000 |
5" Dia. | ||||||||||
| 0.045" | 7/8" | 12,225 | Type 1 | Straight | Ceramic Alumina/Zirconia Alumina | Fiberglass Mesh | Inconel, Hastelloy, Tool Steel | 46 | 0000000 | 0000 |
6" Dia. | ||||||||||
| 1/16" | 7/8" | 10,185 | Type 1 | Straight | Ceramic Alumina/Zirconia Alumina | Fiberglass Mesh | Inconel, Hastelloy, Tool Steel | 46 | 0000000 | 0000 |
Angle Grinder Cutoff Wheels for Aluminum, Brass, and Copper
Use these clog-resistant wheels to make quick cuts in soft metal such as aluminum, brass, and copper. They are reinforced with two layers of fiberglass mesh. Choose coarser grit for fast cuts; choose finer grit for smooth cuts.
Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.
For technical drawings and 3-D models, click on a part number.
Wheel | Material | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| Thick. | Arbor Hole Size | Max. Speed, rpm | Type | Shape | Abrasive | Reinforcement | Grit | Each | |
4 1/2" Dia. | |||||||||
| 0.045" | 7/8" | 13,300 | Type 1 | Straight | Zirconia Alumina | Fiberglass Mesh | 60 | 0000000 | 00000 |
5" Dia. | |||||||||
| 0.045" | 7/8" | 12,200 | Type 1 | Straight | Zirconia Alumina | Fiberglass Mesh | 60 | 0000000 | 0000 |
6" Dia. | |||||||||
| 0.045" | 7/8" | 10,200 | Type 1 | Straight | Zirconia Alumina | Fiberglass Mesh | 60 | 0000000 | 0000 |
7" Dia. | |||||||||
| 0.062" | 7/8" | 8,600 | Type 1 | Straight | Zirconia Alumina | Fiberglass Mesh | 30 | 0000000 | 0000 |
Long-Life Straight Grinder Cutoff Wheels for Metal
Premium-grade abrasive materials and two layers of fiberglass mesh reinforcement give these wheels a longer life than standard cutoff wheels when cutting metal such as iron, stainless steel, and steel. Choose coarser grit for fast cuts; choose finer grit for smooth cuts.
Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.
For technical drawings and 3-D models, click on a part number.
Wheel | Material | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Thick. | Arbor Hole Size | Max. Speed, rpm | Type | Shape | Abrasive | Reinforcement | For Use On | Grit | Each | |
3" Dia. | ||||||||||
| 0.035" | 3/8" | 25,465 | Type 1 | Straight | Zirconia Alumina | Fiberglass Mesh | Iron, Stainless Steel, Steel | 46 | 000000000 | 00000 |
4" Dia. | ||||||||||
| 0.035" | 3/8" | 19,100 | Type 1 | Straight | Zirconia Alumina | Fiberglass Mesh | Iron, Stainless Steel, Steel | 46 | 000000000 | 0000 |
| 1/8" | 1/4" | 19,000 | Type 1 | Straight | Zirconia Alumina | Fiberglass Mesh | Aluminum, Iron, Stainless Steel, Steel | 60 | 000000000 | 0000 |
| 1/8" | 3/8" | 19,100 | Type 1 | Straight | Zirconia Alumina | Fiberglass Mesh | Iron, Stainless Steel, Steel | 46 | 000000000 | 0000 |
Straight Grinder Cutoff Wheels for Stainless Steel
For quick cuts in stainless steel, run these high-density zirconia alumina wheels at a higher rpm than standard cutoff wheels. They’re reinforced with a layer of fiberglass mesh.
Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.
For technical drawings and 3-D models, click on a part number.
Wheel | Material | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| Thick. | Arbor Hole Size | Max. Speed, rpm | Type | Shape | Abrasive | Reinforcement | Grit | Each | |
3" Dia. | |||||||||
| 0.045" | 1/4" | 27,000 | Type 1 | Straight | Zirconia Alumina | Fiberglass Mesh | 60 | 0000000 | 00000 |
4" Dia. | |||||||||
| 0.045" | 3/8" | 22,000 | Type 1 | Straight | Zirconia Alumina | Fiberglass Mesh | 60 | 0000000 | 0000 |
4 1/2" Dia. | |||||||||
| 0.045" | 7/8" | 18,000 | Type 1 | Straight | Zirconia Alumina | Fiberglass Mesh | 60 | 0000000 | 0000 |
5" Dia. | |||||||||
| 0.045" | 7/8" | 15,000 | Type 1 | Straight | Zirconia Alumina | Fiberglass Mesh | 60 | 0000000 | 0000 |
6" Dia. | |||||||||
| 0.045" | 7/8" | 14,200 | Type 1 | Straight | Zirconia Alumina | Fiberglass Mesh | 60 | 0000000 | 0000 |
7" Dia. | |||||||||
| 0.045" | 7/8" | 10,500 | Type 1 | Straight | Zirconia Alumina | Fiberglass Mesh | 60 | 0000000 | 0000 |
Straight Grinder Cutoff Wheels for Hard Metal
The combination of ceramic alumina and zirconia alumina in these wheels lasts up to ten times longer than aluminum oxide when cutting hard metal such as Inconel, Hastelloy, and tool steel. Wheels are reinforced with a layer of fiberglass mesh. Choose coarser grit for fast cuts; choose finer grit for smooth cuts.
Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.
For technical drawings and 3-D models, click on a part number.
Wheel | Material | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Thick. | Arbor Hole Size | Max. Speed, rpm | Type | Shape | Abrasive | Reinforcement | For Use On | Grit | Each | |
3" Dia. | ||||||||||
| 0.035" | 1/4" | 25,465 | Type 1 | Straight | Ceramic Alumina/Zirconia Alumina | Fiberglass Mesh | Inconel, Hastelloy, Tool Steel | 60 | 0000000 | 00000 |
| 0.035" | 3/8" | 25,465 | Type 1 | Straight | Ceramic Alumina/Zirconia Alumina | Fiberglass Mesh | Inconel, Hastelloy, Tool Steel | 60 | 0000000 | 0000 |
| 1/16" | 1/4" | 25,465 | Type 1 | Straight | Ceramic Alumina/Zirconia Alumina | Fiberglass Mesh | Inconel, Hastelloy, Tool Steel | 36 | 0000000 | 0000 |
| 1/16" | 3/8" | 25,465 | Type 1 | Straight | Ceramic Alumina/Zirconia Alumina | Fiberglass Mesh | Inconel, Hastelloy, Tool Steel | 36 | 0000000 | 0000 |
| 1/8" | 3/8" | 25,465 | Type 1 | Straight | Ceramic Alumina/Zirconia Alumina | Fiberglass Mesh | Inconel, Hastelloy, Tool Steel | 36 | 0000000 | 0000 |
4" Dia. | ||||||||||
| 0.035" | 3/8" | 19,100 | Type 1 | Straight | Ceramic Alumina/Zirconia Alumina | Fiberglass Mesh | Inconel, Hastelloy, Tool Steel | 60 | 0000000 | 0000 |
| 0.045" | 1/4" | 22,000 | Type 1 | Straight | Ceramic Alumina/Zirconia Alumina | Fiberglass Mesh | Inconel, Hastelloy, Tool Steel | 60 | 0000000 | 0000 |
| 1/16" | 3/8" | 19,100 | Type 1 | Straight | Ceramic Alumina/Zirconia Alumina | Fiberglass Mesh | Inconel, Hastelloy, Tool Steel | 36 | 0000000 | 0000 |
| 1/8" | 3/8" | 19,100 | Type 1 | Straight | Ceramic Alumina/Zirconia Alumina | Fiberglass Mesh | Inconel, Hastelloy, Tool Steel | 36 | 0000000 | 00000 |
Straight Grinder Cutoff Wheels for Aluminum, Brass, and Copper
Use these clog-resistant zirconia alumina wheels to make quick cuts in soft metal such as aluminum, brass, and copper. Wheels are reinforced with a layer of fiberglass mesh.
Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.
For technical drawings and 3-D models, click on a part number.
Bench-Top Cutoff Saw Wheels for Thin Metal
Use these wheels to cut through metal such as aluminum, iron, stainless steel, and steel. They are reinforced with a layer of fiberglass mesh. Wheels are not for use on hand-held saws.
Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.
For technical drawings and 3-D models, click on a part number.
Wheel | Material | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Thick. | Arbor Hole Size | Max. Speed, rpm | Type | Shape | Abrasive | Reinforcement | For Use On | Grit | Each | |
12" Dia. | ||||||||||
| 7/64" | 1" | 5,095 | Type 1 | Straight | Zirconia Alumina | Fiberglass Mesh | Aluminum, Iron, Stainless Steel, Steel | 36 | 0000000 | 000000 |
14" Dia. | ||||||||||
| 7/64" | 1" | 4,365 | Type 1 | Straight | Zirconia Alumina | Fiberglass Mesh | Aluminum, Iron, Stainless Steel, Steel | 36 | 0000000 | 00000 |
16" Dia. | ||||||||||
| 7/64" | 1" | 3,820 | Type 1 | Straight | Zirconia Alumina | Fiberglass Mesh | Aluminum, Iron, Stainless Steel, Steel | 36 | 0000000 | 00000 |
Bench-Top Cutoff Saw Wheels for Aluminum, Brass, and Copper
Use these clog-resistant wheels to make quick cuts in soft metal such as aluminum, brass, and copper. Wheels are reinforced with a layer of fiberglass mesh. They are not for use on hand-held saws.
Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.
For technical drawings and 3-D models, click on a part number.
Long-Life Floor-Mount Cutoff Saw Wheels for Metal
Two layers of fiberglass mesh reinforcement give these fast-cutting, zirconia alumina wheels at least three times the life of standard cutoff wheels when cutting aluminum, iron, stainless steel, and steel. They are not for use on hand-held saws.
Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.
For technical drawings and 3-D models, click on a part number.
Wheel | Material | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Thick. | Arbor Hole Size | Max. Speed, rpm | Type | Shape | Abrasive | Reinforcement | For Use On | Grit | Each | |
10" Dia. | ||||||||||
| 3/32" | 5/8" | 6,110 | Type 1 | Straight | Zirconia Alumina | Fiberglass Mesh | Aluminum, Iron, Stainless Steel, Steel | 24 | 0000000 | 000000 |
12" Dia. | ||||||||||
| 1/8" | 1" | 5,095 | Type 1 | Straight | Zirconia Alumina | Fiberglass Mesh | Aluminum, Iron, Stainless Steel, Steel | 24 | 0000000 | 00000 |
14" Dia. | ||||||||||
| 1/8" | 1" | 4,365 | Type 1 | Straight | Zirconia Alumina | Fiberglass Mesh | Aluminum, Iron, Stainless Steel, Steel | 24 | 0000000 | 00000 |
16" Dia. | ||||||||||
| 5/32" | 1" | 3,820 | Type 1 | Straight | Zirconia Alumina | Fiberglass Mesh | Aluminum, Iron, Stainless Steel, Steel | 24 | 0000000 | 00000 |
20" Dia. | ||||||||||
| 5/32" | 1" | 2,710 | Type 1 | Straight | Zirconia Alumina | Fiberglass Mesh | Aluminum, Iron, Stainless Steel, Steel | 24 | 0000000 | 00000 |
Floor-Mount Cutoff Saw Wheels for Ductile Cast Iron
These wheels have a blend of aluminum oxide and silicon carbide abrasives for cutting ductile cast iron. Wheels are reinforced with a layer of fiberglass mesh. They are not for use on hand-held saws.
Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.
For technical drawings and 3-D models, click on a part number.
Wheel | Material | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| Thick. | Arbor Hole Size | Max. Speed, rpm | Type | Shape | Abrasive | Reinforcement | Grit | Each | |
20" Dia. | |||||||||
| 3/16" | 1" | 3,800 | Type 1 | Straight | Zirconia Alumina | Fiberglass Mesh | 24 | 0000000 | 000000 |