We will reply to your message within an hour.
These wheels are thinner than standard bench-top cutoff saw wheels, so they cut through aluminum, iron, stainless steel, and steel more quickly.
Make burr-free cuts in hard or thick materials, such as metal pipes, bars, and sheets.
Make burr-free cuts in metal tubing and extrusions, such as strut channels and rails.
Make fast, burr-free cuts in stainless steel with these premium aluminum oxide wheels.
Use these clog-resistant wheels to make quick cuts in soft metal such as aluminum, brass, and copper.
From stone to rubber to metal—slice through a variety of materials with the same cutoff saw wheel.
Made from bonded silicon carbide abrasives, these wheels slice through titanium, one of the hardest materials to cut.
Two layers of fiberglass mesh reinforcement give these fast-cutting, zirconia alumina wheels at least three times the life of standard cutoff wheels when aluminum, iron, stainless steel, and steel.
Use these wheels to cut through metal such as aluminum, iron, stainless steel, and steel.
Make cuts in hard, brittle materials such as firebrick, stone, and concrete.
Designed to cut sheet metal.
Use these wheels to cut through metal such as iron and steel. They are reinforced with a layer of fiberglass mesh.
These wheels have a blend of aluminum oxide and silicon carbide abrasives for cutting ductile cast iron.
The loose weave of the reinforcement material means more of the abrasive grain contacts the metal as you're cutting for a faster cut than standard cutoff wheels.
Cut a variety of materials—from rubber to metal to stone.
The edge of the blade is segmented to cut faster than a continuous edge.
A continuous edge on these blades produces smooth cuts.
Use with water or coolant to produce smoother cuts in tile than dry-cutting blades. They're also for use on glass.
A continuous edge coated in diamond grit makes fast, smooth cuts in stone and ceramic tile.
Also known as rip blades, these steel blades have large, forward-angled, carbide-tipped teeth for making fast cuts.
With a large number of teeth, these blades make smooth cuts across the wood grain for a finish that needs minimal sanding.
Cut wood, plywood, and particleboard.
Make clean cuts in rubber and plastic hose with the scalloped knife edge on these blades.
Produce smooth cuts in plastic materials including polycarbonate, polyurethane, PVC, and acrylic with the carbide-tipped teeth on these blades.
Make fast, clean cuts in steel sheets, angle iron, rebar, and pipe with the carbide teeth on these blades.
Teeth are carbide tipped and designed to push chips away from the blade to prevent clogging and produce smooth cuts in aluminum sheets, tubing, and T-slotted framing.
Diamond grit bonded to a segmented edge cuts through hard metal such as cast iron.
Cut stainless steel sheets, pipe, tubing, and grating with teeth made of impact-resistant carbide.
Prevent clogging when cutting soft metal—these blades have plenty of space between the carbide-tipped teeth to allow chips to escape.
Spend less time on blade changes when cutting steel and stainless steel. These blades have teeth that are a blend of ceramic and carbide, so they cut both materials and last five times longer than blades with standard carbide teeth.
Cut through metal, plastic, and other materials without having to change blades.
Blades and teeth are steel and treated to a Rockwell Hardness between C63 and C65 for increased wear resistance when cutting through steel and cast iron bars, rods, pipe, and tubing.
Use these titanium carbonitride (TiCN) coated blades on stainless steel.
These blades have a higher concentration of diamonds than other dry-cutting blades, so they last up to three times longer.
The blade edge is coated in diamond grit.
Use these blades with water or coolant to produce a smooth cut and minimize heat buildup