Two layers of fiberglass mesh reinforcement give these fast-cutting, zirconia alumina wheels at least three times the life of standard cutoff wheels when cutting aluminum, iron, stainless steel, and steel. They are not for use on hand-held saws.

Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.

For technical drawings and 3-D models, click on a part number.

Use these wheels to cut through metal such as aluminum, iron, stainless steel, and steel.

Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.

For technical drawings and 3-D models, click on a part number.

Use these wheels to cut through metal such as aluminum, iron, stainless steel, and steel. They are reinforced with a layer of fiberglass mesh.

Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.

For technical drawings and 3-D models, click on a part number.

These wheels have a blend of aluminum oxide and silicon carbide abrasives for cutting ductile cast iron. They are reinforced with a layer of fiberglass mesh.

Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.

For technical drawings and 3-D models, click on a part number.

With a large number of teeth, these blades make smooth cuts across the wood grain for a finish that needs minimal sanding. To keep your cuts straight and accurate, they have laser-cut anti-vibration vents that add stability. The vents also dissipate heat to prevent dulling. Use these blades on wood, plywood, and particleboard. They’re good for applications such as making long, accurate cuts on a sheet of plywood or cutting bevels and angles into wood framing to make a door or window.

When choosing a blade, you’ll want to keep in mind the number of teeth and width of cut. Choose more teeth for cutting across the grain; choose fewer teeth for cutting with the grain (ripping) or through thicker materials. A narrower cut width makes faster cuts with minimal material loss; a wider cut width increases stability for straighter cuts.

Blades with an aluminum-alloy-coated body further reduce heat buildup when cutting. This protects your material from burning and keeps dust from sticking to your blade and gumming it up. The coating also prevents the blade from dulling.

Warning: Use blades that have a greater rpm rating than the no-load rpm of your tool.

Also known as rip blades, these steel blades have large, forward-angled, carbide-tipped teeth for making fast cuts with the wood grain (ripping).

These blades have a higher concentration of diamonds than other dry-cutting blades, so they last up to three times longer. Use them with low horsepower (under 20 hp) walk-behind flat saws. Blades with multiple arbor diameters come with a reducer bushing. Choose a narrower width of cut for faster cuts and less material loss.

For technical drawings and 3-D models, click on a part number.