Also known as Type 27, raised-hub, and depressed-center cutoff wheels, these wheels outperform Type 1 wheels when making flush cuts in metal. Wheels are reinforced with two layers of fiberglass mesh. Choose coarser grit for fast cuts; choose finer grit for smooth cuts.

Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.

Make cuts in hard, brittle materials such as firebrick, stone, and concrete. These wheels are silicon carbide that is reinforced with a layer of fiberglass mesh.

Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.

Use these wheels to cut through metal such as aluminum, iron, stainless steel, and steel. They are reinforced with a layer of fiberglass mesh.

Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.

Also known as Type 27, raised-hub, and depressed-center cutoff wheels, these wheels outperform Type 1 wheels when making flush cuts. They make quick cuts in soft metal such as aluminum, brass and copper without clogging. Wheels are reinforced with two layers of fiberglass mesh.

Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.

Also known as Type 27, raised-hub, and depressed-center cutoff wheels, these wheels outperform Type 1 wheels when making flush cuts. They make fast, burr-free cuts in stainless steel. Wheels are reinforced with two layers of fiberglass mesh. Choose coarser grit for fast cuts; choose finer grit for smooth cuts.

Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.

Create the nearly polished finish required for testing metal with these non-reinforced aluminum oxide wheels. They are not for use on hand-held saws.

Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.

Prevent corrosion and discoloration on stainless steel—these wheels contain less than 0.1% iron, chloride, and sulfur contaminants. They have an aluminum oxide grit and are reinforced with two layers of fiberglass mesh. Choose coarser grit for fast cuts; choose finer grit for smooth cuts.

Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.

Also known as Type 27, raised-hub, and depressed-center cutoff wheels, these wheels outperform Type 1 wheels when making flush cuts. They contain less than 0.1% iron, chloride, and sulfur contaminants, so they won't corrode or discolor stainless steel. Wheels are aluminum oxide abrasive that is reinforced with two layers of fiberglass mesh.

Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.

Teeth are carbide tipped and designed to push chips away from the blade to prevent clogging and produce smooth cuts in aluminum sheets, tubing, and T-slotted framing. Choose blades with more teeth for a smoother cut. Blades with a narrower width of cut make faster cuts with less material loss.

The edge of the blade is segmented to cut faster than a continuous edge. These blades have diamond grit that lasts up to three times longer than the grit on other blades for masonry and stone in continuous use applications on hard, abrasive materials. Use dry or with water or coolant (not included). Blades come with a reducer bushing to adjust the arbor diameter. For blades with a round/diamond arbor, detach the center piece to expose the diamond shape.

Blades and teeth are steel and treated to a Rockwell Hardness between C63 and C65 for increased wear resistance when cutting through steel and cast iron bars, rods, pipe, and tubing. Choose blades with more teeth for a smoother cut.

Prevent clogging when cutting soft metal—these blades have plenty of space between the carbide-tipped teeth to allow chips to escape. The blade with multiple arbor diameters comes with a reducer bushing. Choose blades with more teeth for a smoother cut.

Make fast, clean cuts in steel sheets, angle iron, rebar, and pipe with the carbide teeth on these blades. They bite into steel to make both straight and plunge cuts, so they can slice through material that’s already installed. When choosing a blade, you'll want to keep in mind the number of teeth and the width of the cut. Choose more teeth for a smoother cut; choose fewer teeth for a faster cut and for cutting thicker materials. A narrower cut width makes faster cuts with minimal material loss; a wider cut width increases stability for straighter cuts.

Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.

With more than 1.5 times more teeth than a standard circular saw blade, these blades make smooth cuts across the wood grain for a finish that needs minimal sanding. Use them on wood, plywood, and particleboard. They make both straight and plunge cuts, so they can cut lumber down to size and slice through material that’s already installed.

Warning: Use blades that have a greater rpm rating than the no-load rpm of your tool.

A continuous edge on these blades produces smooth cuts. They have diamond grit that lasts up to three times longer than the grit on other blades for masonry and stone in continuous use applications on hard, abrasive materials. Use dry or with water or coolant (not included). Blades come with a reducer bushing to adjust the arbor diameter. For blades with a round/diamond arbor, detach the center piece to expose the diamond shape.

Cut steel and stainless steel without having to change blades—the ceramic/carbide blend teeth on these blades cut both. They also last five times longer than blades with carbide teeth. An aluminum coating on their body resists heat buildup to prevent these blades from dulling and getting gummed up with metal shards. Because they stay cool, they won’t accidentally harden the edge that you’re cutting. Anti-vibration vents limit shaking, so your cuts are straight and accurate. The vents further reduce heat buildup to prevent dulling. Use these blades to make both straight and plunge cuts. They’re great for cutting steel channel to size and cutting material that’s already installed.

Choose blades with more teeth for a smoother cut; choose blades with fewer teeth for a faster cut and for cutting thicker materials.

Warning: Use blades that have a greater rpm rating than the no-load rpm of your tool.

Use these titanium carbon nitride (TiCN) coated blades on stainless steel bars, rods, pipe, and tubing. Blades and teeth are steel and treated to a Rockwell Hardness between C63 and C65 for increased wear resistance. Choose blades with more teeth for a smoother cut.

Cut stainless steel sheets, pipe, tubing, and grating with teeth made of impact-resistant carbide. Choose blades with more teeth for a smoother cut.