Make cuts in hard, brittle materials such as firebrick, stone, and concrete. Wheels are made of silicon carbide abrasive that is reinforced with a layer of fiberglass mesh.

Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.

From stone to rubber to metal—slice through a variety of materials with the same cutoff saw wheel. Made of silicon carbide and aluminum oxide abrasives, these wheels won’t clog or burn when cutting through nonmetals. Attach them to your bench-top cutoff saw to make burr-free cuts in pipes, bars, and sheets. You shouldn’t use these wheels with handheld saws.

Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.

Swap accessories quickly and safely without tools. These wheels have a special arbor hole that work with a pull-twist-release locking mechanism (sold separately). They are also compatible with standard Dremel wheel arbors with a slotted-head-screw locking mechanism.

Make cuts in hard, brittle materials such as firebrick, stone, and concrete. These wheels are silicon carbide that is reinforced with a layer of fiberglass mesh.

Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.

Make burr-free cuts in a variety of materials—from rubber to metal to stone. Made from a blend of silicon carbide and aluminum oxide abrasives, these cutoff wheels won’t clog or burn when slicing through nonmetals. They’re often used to cut hard or thick pipe, sheets, and bars to size.

Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.

Make cuts in hard, brittle materials such as firebrick, stone, and concrete. These wheels have a layer of fiberglass mesh reinforcement.

Make cuts in hard, brittle materials such as firebrick, stone, and concrete. These silicon carbide wheels are reinforced with a layer of fiberglass mesh. For wheels with a round/diamond arbor, detach the center piece to expose the diamond shape.

Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.

Use these blades with water or coolant (not included) to produce a smooth cut and minimize heat buildup. Choose a narrower width of cut for faster cuts and less material loss.

These blades have a higher concentration of diamonds than other dry-cutting blades, so they last up to three times longer. Use them with low horsepower (under 20 hp) walk-behind flat saws. Blades with multiple arbor diameters come with a reducer bushing. Choose a narrower width of cut for faster cuts and less material loss.

Use these blades with low horsepower (under 20 hp) walk-behind flat saws. Blades come with a reducer bushing to adjust the arbor diameter. Choose a narrower width of cut for faster cuts and less material loss.

A continuous edge on these blades produces smooth cuts. They have diamond grit that lasts up to three times longer than the grit on other blades for masonry, stone, and concrete in continuous use applications on hard, abrasive materials. Use dry or with water or coolant (not included).

Blades come with a reducer bushing to adjust the arbor diameter. Detach the center piece on the round/diamond arbor to expose the diamond shape.