McMaster-Carr logo
    Filter by
    System of Measurement
    Grinding Wheel Designation
    Tooth Style
    Export Control Classification Number (ECCN)
    Industrial Info Snippet
    DFARS Specialty Metals
    Arbor Hole Shape
    Grinding Wheel Shape
    U.S.–Mexico–Canada Agreement (USMCA) Qualifying
    Cut Type
    Reinforcement Material
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    60 Products

    Multipurpose Portable Cutoff Saw Wheels

    Image of Product. Side1 orientation. Cutoff Saw Wheels. Multipurpose Portable Cutoff Saw Wheels .
    Image of Specification. Side View. Side1 orientation.

    Side

    View

    Make burr-free cuts in a variety of materials—from rubber to metal to stone. Made from a blend of silicon carbide and aluminum oxide abrasives, these cutoff wheels won’t clog or burn when slicing through nonmetals. They’re often used to cut hard or thick pipe, sheets, and bars to size.
    Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.
    Grinding
    Wheel
    Material
    Thk.
    Arbor Hole
    Size, mm
    Arbor Hole
    Shape
    Max. Rotation
    Speed, rpm
    Designation
    Shape
    Abrasive
    Reinforcement
    For Use On
    Grit
    Each
    12" Diameter
    0.125"20Round6,400Type 1StraightAluminum Oxide/Silicon Carbide BlendFiberglass MeshAluminum, Brass, Carbide, Concrete, Copper, Hastelloy Nickel, Inconel Nickel, Masonry, PVC, Rubber, Stainless Steel, Steel, Stone307200N11000000
     
    14" Diameter
    0.125"20Round5,500Type 1StraightAluminum Oxide/Silicon Carbide BlendFiberglass MeshAluminum, Brass, Carbide, Concrete, Copper, Hastelloy Nickel, Inconel Nickel, Masonry, PVC, Rubber, Stainless Steel, Steel, Stone307200N1200000
     

    Angle Grinder Cutoff Wheels for Hard Metal

    Image of Product. Front orientation. Cutoff Wheels. Angle Grinder Cutoff Wheels for Hard Metal.
    Image of Specification. Side View. Side1 orientation. Straight Grinding Wheel. Angle Grinder Cutoff Wheels for Hard Metal.

    Side

    View

    Made of ceramic alumina or a combination of ceramic alumina and zirconia alumina, these wheels last up to ten times longer than standard cutoff wheels when cutting hard metal such as Inconel nickel, Hastelloy nickel, and tool steel. Wheels are reinforced with two layers of fiberglass mesh.
    Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.
    Grinding
    Wheel
    Material
    Thk.
    Arbor Hole
    Size
    Max. Rotation
    Speed, rpm
    Designation
    Shape
    Abrasive
    Reinforcement
    For Use On
    Grit
    Each
    4 1/2" Diameter
    0.045"7/8"13,580Type 1StraightCeramic Alumina/Zirconia AluminaFiberglass MeshHastelloy Nickel, Inconel Nickel, Tool Steel362499A5100000
    1/16"7/8"13,580Type 1StraightCeramic AluminaFiberglass MeshHastelloy Nickel, Inconel Nickel, Tool Steel362499A210000
     
    5" Diameter
    0.045"7/8"12,225Type 1StraightCeramic Alumina/Zirconia AluminaFiberglass MeshHastelloy Nickel, Inconel Nickel, Tool Steel462499A520000
    1/16"7/8"12,200Type 1StraightCeramic AluminaFiberglass MeshHastelloy Nickel, Inconel Nickel, Tool Steel462499A220000
     
    6" Diameter
    1/16"7/8"10,185Type 1StraightCeramic Alumina/Zirconia AluminaFiberglass MeshHastelloy Nickel, Inconel Nickel, Tool Steel462499A540000
     
    7" Diameter
    3/64"5/8"8,500Type 1StraightCeramic AluminaFiberglass MeshHastelloy Nickel, Inconel Nickel, Tool Steel602499A230000
     

    Bench and Surface Grinder Cutoff Wheels for Hard Metal

    Image of Product. Front orientation. Cutoff Wheels. Bench and Surface Grinder Cutoff Wheels for Hard Metal.
    Image of Specification. Side View. Side1 orientation. Straight Grinding Wheel. Bench and Surface Grinder Cutoff Wheels for Hard Metal.

    Side

    View

    Made with boron nitride, second only in hardness to diamond, these wheels are highly wear resistant, so they easily cut steel with a Rockwell hardness of C50 or greater, including alloy steel, A2, D2, and T15 tool steel. While these wheels are not as hard as wheels made with diamond, they dissipate heat better.
    Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.
    Grinding
    Wheel
    Material
    Thk.
    Arbor Hole
    Size
    Max. Rotation
    Speed, rpm
    Designation
    Shape
    Abrasive
    Body
    For Use On
    Grit
    Each
    6" Diameter
    1/32"1 1/4"6,045Type 1StraightBoron NitrideSteelHastelloy Nickel, Inconel Nickel, Tool Steel1004734N110000000
    3/64"1 1/4"6,045Type 1StraightBoron NitrideSteelHastelloy Nickel, Inconel Nickel, Tool Steel1004734N12000000
     
    8" Diameter
    3/64"1 1/4"4,535Type 1StraightBoron NitrideSteelHastelloy Nickel, Inconel Nickel, Tool Steel1004734N13000000
     
    10" Diameter
    3/64"1 1/4"3,625Type 1StraightBoron NitrideSteelHastelloy Nickel, Inconel Nickel, Tool Steel1004734N14000000
     

    Band Saw Blades for Hardened Steel, Super Alloys, and Graphite

    Carbide grit bonded to alloy steel blades cuts through hard materials such as hardened steel, graphite, fiberglass, composites, and nickel alloys including Hastelloy and Inconel. Choose medium grit for less material loss and a smooth finish; choose coarse grit for fast cutting. Blades have a welded seam and are ready to install on your saw. Use coolant (not included) when cutting metals.
    Gullet Tooth
    Image of Product. Front orientation. ZoomedIn view. Band Saw Blades. Band Saw Blades for Hardened Steel, Super Alloys, and Graphite, Gullet Tooth.
    Gullet blades quickly cut material that is at least 1/4" thick.
    Material
    Each
    Choose a
    Length
    Wd.
    Thk.
    For Min.
    Material Thk.
    For Use On
    Body
    Abrasive
    Each
    Per
    Inch
    Coarse Grit
    45.0" to 240.0"1/2"0.025"1/4"Hardened Steel, Hastelloy Nickel, Inconel Nickel, GraphiteSteelCarbide3054A133000000
    45.0" to 240.0"1"0.035"1/4"Hardened Steel, Hastelloy Nickel, Inconel Nickel, GraphiteSteelCarbide3054A13700000
    93"3/4"0.032"1/4"Hardened Steel, Hastelloy Nickel, Inconel Nickel, GraphiteSteelCarbide3054A13500000000
    120"1/2"0.025"1/4"Hardened Steel, Hastelloy Nickel, Inconel Nickel, GraphiteSteelCarbide3054A1170000000
    132"1"0.035"1/4"Hardened Steel, Hastelloy Nickel, Inconel Nickel, GraphiteSteelCarbide3054A2450000000
    138"3/4"0.032"1/4"Hardened Steel, Hastelloy Nickel, Inconel Nickel, GraphiteSteelCarbide3054A1410000000
    138"1"0.035"1/4"Hardened Steel, Hastelloy Nickel, Inconel Nickel, GraphiteSteelCarbide3054A1230000000
    144"1"0.035"1/4"Hardened Steel, Hastelloy Nickel, Inconel Nickel, GraphiteSteelCarbide3054A1250000000
    174"1"0.035"1/4"Hardened Steel, Hastelloy Nickel, Inconel Nickel, GraphiteSteelCarbide3054A1360000000
     
    Medium Grit
    45.0" to 240.0"1/2"0.025"1/4"Hardened Steel, Hastelloy Nickel, Inconel Nickel, GraphiteSteelCarbide3054A13400000
    45.0" to 240.0"3/4"0.032"1/4"Hardened Steel, Hastelloy Nickel, Inconel Nickel, GraphiteSteelCarbide3054A12800000
    93"1/4"0.02"1/4"Hardened Steel, Hastelloy Nickel, Inconel Nickel, GraphiteSteelCarbide3054A1310000000
    93"1/2"0.025"1/4"Hardened Steel, Hastelloy Nickel, Inconel Nickel, GraphiteSteelCarbide3054A1120000000
    93"3/4"0.032"1/4"Hardened Steel, Hastelloy Nickel, Inconel Nickel, GraphiteSteelCarbide3054A1140000000
    120"1/2"0.025"1/4"Hardened Steel, Hastelloy Nickel, Inconel Nickel, GraphiteSteelCarbide3054A1160000000
    132"1"0.035"1/4"Hardened Steel, Hastelloy Nickel, Inconel Nickel, GraphiteSteelCarbide3054A1190000000
    138"1"0.035"1/4"Hardened Steel, Hastelloy Nickel, Inconel Nickel, GraphiteSteelCarbide3054A1220000000
    144"1"0.035"1/4"Hardened Steel, Hastelloy Nickel, Inconel Nickel, GraphiteSteelCarbide3054A1240000000
     
    Continuous Tooth
    Image of Product. Front orientation. ZoomedIn view. Band Saw Blades. Band Saw Blades for Hardened Steel, Super Alloys, and Graphite, Continuous Tooth.
    Continuous blades are better than gullet blades for material that fractures and chips easily and material less than 1/4" thick. Use with saw wheels that are at least 24" diameter.
    Material
    Each
    Choose a
    Length
    Wd.
    Thk.
    For Max.
    Material Thk.
    For Min. Saw
    Wheel Dia.
    For Use On
    Body
    Abrasive
    Each
    Per
    Inch
    Coarse Grit
    45.0" to 240.0"1/2"0.025"1/4"24"Hardened Steel, Hastelloy Nickel, Inconel Nickel, GraphiteSteelCarbide3054A233000000
    45.0" to 240.0"1"0.035"1/4"24"Hardened Steel, Hastelloy Nickel, Inconel Nickel, GraphiteSteelCarbide3054A23700000
    93"3/4"0.032"1/4"24"Hardened Steel, Hastelloy Nickel, Inconel Nickel, GraphiteSteelCarbide3054A23500000000
    120"1/2"0.025"1/4"24"Hardened Steel, Hastelloy Nickel, Inconel Nickel, GraphiteSteelCarbide3054A2170000000
    132"1"0.035"1/4"24"Hardened Steel, Hastelloy Nickel, Inconel Nickel, GraphiteSteelCarbide3054A2380000000
    138"3/4"0.032"1/4"24"Hardened Steel, Hastelloy Nickel, Inconel Nickel, GraphiteSteelCarbide3054A2410000000
    138"1"0.035"1/4"24"Hardened Steel, Hastelloy Nickel, Inconel Nickel, GraphiteSteelCarbide3054A2230000000
    144"1"0.035"1/4"24"Hardened Steel, Hastelloy Nickel, Inconel Nickel, GraphiteSteelCarbide3054A2250000000
    174"1"0.035"1/4"24"Hardened Steel, Hastelloy Nickel, Inconel Nickel, GraphiteSteelCarbide3054A2360000000
     
    Medium Grit
    45.0" to 240.0"1/2"0.025"1/4"24"Hardened Steel, Hastelloy Nickel, Inconel Nickel, GraphiteSteelCarbide3054A23400000
    45.0" to 240.0"3/4"0.032"1/4"24"Hardened Steel, Hastelloy Nickel, Inconel Nickel, GraphiteSteelCarbide3054A22800000
    93"1/2"0.025"1/4"24"Hardened Steel, Hastelloy Nickel, Inconel Nickel, GraphiteSteelCarbide3054A2120000000
    93"3/4"0.032"1/4"24"Hardened Steel, Hastelloy Nickel, Inconel Nickel, GraphiteSteelCarbide3054A2140000000
    120"1/2"0.025"1/4"24"Hardened Steel, Hastelloy Nickel, Inconel Nickel, GraphiteSteelCarbide3054A2160000000
     

    Straight Grinder Cutoff Wheels for Hard Metal

    Image of Product. Front orientation. Cutoff Wheels. Straight Grinder Cutoff Wheels for Hard Metal.
    Image of Specification. Side View. Side1 orientation. Straight Grinding Wheel. Straight Grinder Cutoff Wheels for Hard Metal.

    Side

    View

    The combination of ceramic alumina and zirconia alumina in these wheels lasts up to ten times longer than aluminum oxide when cutting hard metal such as Inconel nickel, Hastelloy nickel, and tool steel. Wheels are reinforced with a layer of fiberglass mesh. Choose coarser grit for fast cuts; choose finer grit for smooth cuts.
    Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.
    Grinding
    Wheel
    Material
    Thk.
    Arbor Hole
    Size
    Max. Rotation
    Speed, rpm
    Designation
    Shape
    Abrasive
    Reinforcement
    For Use On
    Grit
    Each
    3" Diameter
    0.035"1/4"25,465Type 1StraightCeramic Alumina/Zirconia AluminaFiberglass MeshHastelloy Nickel, Inconel Nickel, Tool Steel602499A3100000
    0.035"3/8"25,465Type 1StraightCeramic Alumina/Zirconia AluminaFiberglass MeshHastelloy Nickel, Inconel Nickel, Tool Steel602499A320000
    1/16"1/4"25,465Type 1StraightCeramic Alumina/Zirconia AluminaFiberglass MeshHastelloy Nickel, Inconel Nickel, Tool Steel362499A350000
    1/16"3/8"25,465Type 1StraightCeramic Alumina/Zirconia AluminaFiberglass MeshHastelloy Nickel, Inconel Nickel, Tool Steel362499A360000
    1/8"3/8"25,465Type 1StraightCeramic Alumina/Zirconia AluminaFiberglass MeshHastelloy Nickel, Inconel Nickel, Tool Steel362499A380000
     
    4" Diameter
    0.035"3/8"19,100Type 1StraightCeramic Alumina/Zirconia AluminaFiberglass MeshHastelloy Nickel, Inconel Nickel, Tool Steel602499A3400000
    0.045"1/4"22,000Type 1StraightCeramic Alumina/Zirconia AluminaFiberglass MeshHastelloy Nickel, Inconel Nickel, Tool Steel602499A330000
    1/16"3/8"19,100Type 1StraightCeramic Alumina/Zirconia AluminaFiberglass MeshHastelloy Nickel, Inconel Nickel, Tool Steel362499A4100000
    1/8"3/8"19,100Type 1StraightCeramic Alumina/Zirconia AluminaFiberglass MeshHastelloy Nickel, Inconel Nickel, Tool Steel362499A4300000
     

    Flush-Cut Angle Grinder Cutoff Wheels for Hard Metal

    Image of Product. Front orientation. Cutoff Wheels. Flush-Cut Angle Grinder Cutoff Wheels for Hard Metal.
    Image of Specification. Side View. Side1 orientation. Raised-Hub Grinding Wheel. Flush-Cut Angle Grinder Cutoff Wheels for Hard Metal.

    Side

    View

    Made of ceramic alumina, these wheels last 10 times longer than standard cutoff wheels when cutting hard metal, such as tool steel. They’re reinforced with two layers of fiberglass mesh. These wheels, also known as Type 27, raised hub, and depressed-center cutoff wheels, outperform Type 1 wheels when making flush cuts.
    Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.
    Grinding
    Wheel
    Material
    Thk.
    Arbor Hole
    Size
    Arbor Hole
    Thread Size
    Max. Rotation
    Speed, rpm
    Designation
    Shape
    Abrasive
    Reinforcement
    For Use On
    Grit
    Each
    4 1/2" Diameter
    3/64"7/8"—13,300Type 27Raised HubCeramic AluminaFiberglass MeshHastelloy Nickel, Inconel Nickel, Tool Steel604745N1100000
    1/16"—5/8"-11
    		13,580Type 27Raised HubCeramic AluminaFiberglass MeshHastelloy Nickel, Inconel Nickel, Tool Steel364745N2100000
    1/16"7/8"—13,580Type 27Raised HubCeramic AluminaFiberglass MeshHastelloy Nickel, Inconel Nickel, Tool Steel364745N220000
     
    5" Diameter
    3/64"7/8"—12,200Type 27Raised HubCeramic AluminaFiberglass MeshHastelloy Nickel, Inconel Nickel, Tool Steel604745N120000
    1/16"7/8"—12,225Type 27Raised HubCeramic AluminaFiberglass MeshHastelloy Nickel, Inconel Nickel, Tool Steel364745N2300000
     
    6" Diameter
    3/64"7/8"—10,200Type 27Raised HubCeramic AluminaFiberglass MeshHastelloy Nickel, Inconel Nickel, Tool Steel604745N1300000
    1/16"7/8"—10,185Type 27Raised HubCeramic AluminaFiberglass MeshHastelloy Nickel, Inconel Nickel, Tool Steel364745N2400000
     
    back to top