About Nuts, Materials, and Finishes
More
Rod End Nuts
Attach these nuts to rods, pipes, and tubes to make pivoting and hinge movements where misalignment is not a concern. They’re often used to control air- and hydraulic-powered arms as well as other components in power transmission systems. Made of zinc-plated steel, these nuts resist being dislodged. They’re heavy, however, and may corrode over time as the plating wears down.
| Shank Thread Size | ID, mm | Overall Diameter, mm | Shank Center Length, mm | Shank Thread Length, mm | Tensile Strength  | Material | Each | |
Right-Hand Threaded Shank | ||||||||
|---|---|---|---|---|---|---|---|---|
| M3.5 × 0.6 mm | 4.1 | 8 | 11 | 6 | Not Rated | Zinc-Plated Steel | 0000000 | 00000 |
| M5 × 0.8 mm | 6.1 | 10 | 16 | 8 | Not Rated | Zinc-Plated Steel | 0000000 | 0000 |
| M8 × 1.25 mm | 8.1 | 14 | 19 | 11 | Not Rated | Zinc-Plated Steel | 0000000 | 0000 |
| M10 × 1.5 mm | 8.1 | 18 | 27 | 12 | Not Rated | Zinc-Plated Steel | 0000000 | 0000 |
| Shank Thread Size | ID, mm | Overall Width, mm | Overall Thickness, mm | Shank Center Length, mm | Shank Thread Length, mm | Tensile Strength | Material | Each | |
Right-Hand Threaded Shank | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| M5 × 0.8 mm | 8.1 | 15 | 10 | 16 | 8 | Not Rated | Zinc-Plated Steel | 0000000 | 00000 |
Corrosion-Resistant Rod End Nuts
Made of stainless steel for excellent corrosion resistance, these nuts make pivoting and hinge movements where misalignment is not a concern. Attach them to rods, pipes, and tubes to control air- and hydraulic-powered arms as well as other components in power transmission systems. They have a rubber bushing to reduce noise and vibration.
For technical drawings and 3-D models, click on a part number.
| Shank Thread Size | ID, mm | Overall Diameter, mm | Shank Center Length, mm | Shank Thread Length, mm | Tensile Strength | Material | Each | |
Right-Hand Threaded Shank | ||||||||
|---|---|---|---|---|---|---|---|---|
Round | ||||||||
| M5 × 0.8 mm | 6.1 | 10 | 16 | 8 | Not Rated | 303 Stainless Steel | 0000000 | 00000 |
| M8 × 1.25 mm | 8.1 | 14 | 19 | 11 | Not Rated | 303 Stainless Steel | 0000000 | 00000 |
| M10 × 1.5 mm | 8.1 | 18 | 27 | 12 | Not Rated | 303 Stainless Steel | 0000000 | 00000 |
Clevis Rod Ends for Hydraulic Cylinders
Connect a clevis rod end to a hydraulic cylinder to create a bend or pivot. Use these with pivot brackets and clevis pins (each component sold separately). They’re also known as yoke-end linkages.
Stainless steel clevis rod ends are more corrosion resistant than steel clevis rod ends in wet environments.
For technical drawings and 3-D models, click on a part number.
Overall | Shank | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| For Pin Dia. | Jaw Opening Wd. | Shank Center Lg. | Wd. | Lg. | Ht. | Thread Size | Gender | Threading | For Cylinder Mounting Pattern | Each | |
Steel | |||||||||||
| 1/2" | 3/4" | 1 1/2" | 1 3/4" | 2" | 1" | 7/16"-20 | Female | Fully Threaded | NFPA Light Duty, NFPA Heavy Duty, JIC Heavy Duty | 00000000 | 000000 |
| 3/4" | 1 1/4" | 2 3/8" | 2 1/2" | 3 1/8" | 1 1/2" | 3/4"-16 | Female | Fully Threaded | NFPA Light Duty, NFPA Heavy Duty, JIC Heavy Duty | 00000000 | 00000 |
| 1" | 1 1/2" | 3 1/8" | 3" | 4 1/8" | 2" | 1"-14 | Female | Fully Threaded | NFPA Light Duty, NFPA Heavy Duty, JIC Heavy Duty | 00000000 | 000000 |
| 1 3/8" | 2 1/16" | 4 1/8" | 4 1/16" | 5 1/2" | 2 3/4" | 1 1/4"-12 | Female | Fully Threaded | NFPA Light Duty, NFPA Heavy Duty, JIC Heavy Duty | 00000000 | 000000 |
Stainless Steel | |||||||||||
| 1/2" | 3/4" | 1 1/2" | 1 3/4" | 2" | 1" | 7/16"-20 | Female | Fully Threaded | NFPA Light Duty, NFPA Heavy Duty, JIC Heavy Duty | 0000000 | 000000 |
| 3/4" | 1 1/4" | 2 3/8" | 2 1/2" | 3 1/8" | 1 1/2" | 3/4"-16 | Female | Fully Threaded | NFPA Light Duty, NFPA Heavy Duty, JIC Heavy Duty | 0000000 | 000000 |
| 1" | 1 1/2" | 3 1/8" | 3" | 4 1/8" | 2" | 1"-14 | Female | Fully Threaded | NFPA Light Duty, NFPA Heavy Duty, JIC Heavy Duty | 0000000 | 000000 |
| 1 3/8" | 2 1/16" | 4 1/8" | 4 1/16" | 5 1/2" | 2 3/4" | 1 1/4"-12 | Female | Fully Threaded | NFPA Light Duty, NFPA Heavy Duty, JIC Heavy Duty | 0000000 | 00000000 |
Flat-Shoulder Rod Ends for Hydraulic Cylinders
Create a bend or pivot at the end of a hydraulic cylinder. These rod ends meet common NFPA and JIC mounting patterns, so they're easy to swap out.
For technical drawings and 3-D models, click on a part number.
| For Bore Dia. | ID | Lg. | Wd. | Ht. | Material | Gender | For Cylinder Mounting Pattern | Each | |
| 7/16" | 1/2" | 2" | 1" | 3/4" | Steel | Female | NFPA Light Duty, NFPA Heavy Duty, JIC Heavy Duty | 0000000 | 000000 |
| 3/4" | 3/4" | 2 13/16" | 1 1/2" | 1 1/4" | Steel | Female | NFPA Light Duty, NFPA Heavy Duty, JIC Heavy Duty | 0000000 | 00000 |
| 1" | 1" | 3 13/16" | 2" | 1 1/2" | Steel | Female | NFPA Light Duty, NFPA Heavy Duty, JIC Heavy Duty | 0000000 | 00000 |
| 1 1/4" | 1 3/8" | 4 13/16" | 2 3/4" | 2" | Steel | Female | NFPA Light Duty, NFPA Heavy Duty, JIC Heavy Duty | 0000000 | 00000 |
Clevis Brackets for Hydraulic Cylinders
Mount these clevis brackets directly to a hydraulic cylinder. Clevis brackets allow hydraulic cylinders to create a bend or pivot when connected to a pivot bracket.
For technical drawings and 3-D models, click on a part number.
Mounting Hole | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Pin Dia. | Wd. | Ht. | Dp. | Jaw Opening Wd. | Base Plate Thick. | Dia. | Ctr.-to-Ctr. | Mounting Fasteners Included | For Cylinder Mounting Pattern | Includes | Each | |
Steel | ||||||||||||
| 1/2" | 2 1/2" | 2 1/2" | 1 5/8" | 3/4" | 3/8" | 3/8" | 1 5/8" | Yes | NFPA Heavy Duty, JIC Heavy Duty | Clevis Pin, Two Cotter Pins | 00000000 | 0000000 |
| 3/4" | 3" | 3" | 2 5/8" | 1 1/4" | 5/8" | 9/16" | 2 1/16" | Yes | NFPA Heavy Duty, JIC Heavy Duty | Clevis Pin, Two Cotter Pins | 00000000 | 000000 |
| 3/4" | 3 1/2" | 3 1/2" | 2 5/8" | 1 1/4" | 5/8" | 9/16" | 2 9/16" | Yes | NFPA Heavy Duty, JIC Heavy Duty | Clevis Pin, Two Cotter Pins | 00000000 | 000000 |
| 1" | 4 1/2" | 4 1/2" | 3 1/4" | 1 1/2" | 3/4" | 5/8" | 3 1/4" | Yes | NFPA Heavy Duty, JIC Heavy Duty | Clevis Pin, Two Cotter Pins | 00000000 | 000000 |
| 1 3/8" | 5" | 5" | 4 3/8" | 2 1/16" | 7/8" | 5/8" | 3 13/16" | Yes | NFPA Heavy Duty, JIC Heavy Duty | Clevis Pin, Two Cotter Pins | 00000000 | 000000 |
Pivot Brackets for Hydraulic Cylinders
Pivot brackets are designed to be used with clevis rod ends and clevis pins (each component sold separately). When connected to a clevis rod end, they allow a hydraulic cylinder to move in an arc. Do not mount pivot brackets directly onto the cylinder.
For technical drawings and 3-D models, click on a part number.
Mounting Hole | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| For Pin Dia. | Wd. | Ht. | Dp. | Base Plate Thick. | Dia. | Ctr.-to-Ctr. | Mounting Fasteners Included | For Cylinder Mounting Pattern | Each | |
Steel | ||||||||||
| 1/2" | 2 1/2" | 2 1/2" | 1 5/8" | 3/8" | 13/32" | 1 5/8" | No | NFPA Light Duty, NFPA Heavy Duty, JIC Heavy Duty | 00000000 | 000000 |
| 3/4" | 3 1/2" | 3 1/2" | 2 5/8" | 5/8" | 17/32" | 2 9/16" | No | NFPA Light Duty, NFPA Heavy Duty, JIC Heavy Duty | 00000000 | 00000 |
| 1" | 4 1/2" | 4 1/2" | 3 1/4" | 3/4" | 21/32" | 3 1/4" | No | NFPA Light Duty, NFPA Heavy Duty, JIC Heavy Duty | 00000000 | 000000 |
Iron | ||||||||||
| 1 3/8" | 5" | 5" | 4 3/8" | 7/8" | 21/32" | 3 13/16" | No | NFPA Light Duty, NFPA Heavy Duty, JIC Heavy Duty | 00000000 | 000000 |
Clevis Pins for Hydraulic Cylinders
Secure parts onto hydraulic cylinders. Use these pins with clevis rod ends and pivot brackets (sold separately).
For technical drawings and 3-D models, click on a part number.
| Dia. | Usable Lg. | Lg. | Through Hole Dia. | For Cylinder Mounting Pattern | Includes | Each | |
1144 Carbon Steel | |||||||
|---|---|---|---|---|---|---|---|
| 1/2" | 1 15/16" | 2 9/32" | 0.106" | NFPA Light Duty, NFPA Heavy Duty, JIC Heavy Duty | Two Cotter Pins | 00000000 | 000000 |
| 3/4" | 2 23/32" | 3 3/32" | 0.14" | NFPA Light Duty, NFPA Heavy Duty, JIC Heavy Duty | Two Cotter Pins | 00000000 | 00000 |
| 1" | 3 7/32" | 3 19/32" | 0.14" | NFPA Light Duty, NFPA Heavy Duty, JIC Heavy Duty | Two Cotter Pins | 00000000 | 00000 |
| 1 3/8" | 4 1/4" | 4 21/32" | 0.173" | NFPA Light Duty, NFPA Heavy Duty, JIC Heavy Duty | Two Cotter Pins | 00000000 | 00000 |