Safely connect slightly misaligned shafts near food lines—the spider on these couplings contains metal, so it’ll trigger a metal detector if a piece frays off and contaminates your batch.

Customize the bore of these flexible couplings to align uncommon shaft sizes as well as shafts that have become undersized from wear or oversized from coatings.

Each hub includes a set screw, which bites into your shaft to hold the coupling in place.

The thick split spider on these couplings takes on twice as much torque as standard split spiders, while a set screw holds the hubs in place on your shaft. Also known as jaw couplings, use them to connect motors to pumps, mixers, and other high-torque equipment.

A strip of flexible spring steel wraps around the teeth of both hubs to absorb sharp, momentary load increases that can come from motor startups, emergency braking, or sudden impact with hard objects.

With a bellows between two hubs, these couplings handle all types of misalignment and are good for precision stepper and encoder motion-control applications.

Tighten the set screws to fasten these couplings to your shaft. Set screws bite into the shaft to hold the couplings in place.

An acetal plastic spacer at the center of these couplings insulates bearings, encoders, and other shaft components from stray electric current. Use them with servomotors, which sometimes generate current that travels down the shaft and can damage circuit boards, interfere with readings, and cause wear on bearing raceways.

Connect shafts and ball screws to high-speed servomotors and stepper motors—these shaft couplings handle four times more speed than standard servomotor couplings.

Able to handle high twisting forces as well as misalignment, these couplings are good for high-performance servomotor applications.

A flexible tire on these couplings safeguards components on your shafts by reducing vibration and shock.

Use these gear-shaped couplings for high-speed and high-torque applications.

With a rugged roller-chain design, these couplings provide excellent torque and angular misalignment capacities.