Carry DC power in or out of electronic devices with these cords. All have industry standard barrel-style connections, letting you power electronics from power supplies.

Plug these adapter cords into a standard outlet and they change AC voltage to DC voltage.

To run DC-powered lab and medical equipment from your outlet, add a power cord with the plug style and length you need. These adapters meet strict IEC, UL, or ANSI/AAMI standards for use with medical devices.

Plug these cords into a vehicle socket to charge devices that run on AC voltage.

TPE insulation protects these cords from some of the toughest industrial conditions, including abrasion, coolants, chemicals, UV rays, and weld slag. Use them in areas with welding, machining, and fluctuating temperatures to send signal and power to M12 proximity switches, valves, and other devices.

Step on or roll carts and platform trucks over these M12 cords without crushing them.

These cords have a Nano M8 connector (also known as a pico connector) on one end and an USB Type-A connector on the other.

Often used for automated systems, motors, and pumps in tough industrial areas such as near welding and metal machining, these cords carry higher current than M5, M8, and M12 cords.

These cords have an M8 connector on one end and an M12 connector on the other.

Send signal and power to low-current devices with M8 connections near welding, metal machining, and in spots where temperatures change.

A few turns is all it takes to join these cords, which have thick threads similar to a light bulb, for a secure connection in washdown and high-vibration areas. They detach just as fast for frequent maintenance.

Use these cords with hydraulic and air-powered valves, motors, pumps, and pressure switches. They have a solenoid valve socket on one end and an M12 threaded plug on the other.

Often used in automation systems such as conveyors and sorters, these cords have plug and socket ends, so they quickly connect and disconnect for maintenance and do not need to be hardwired.

Made with industry standard barrel-style ends, these connectors carry DC power between electronic devices and power supplies.

Use these connectors in vehicles and other agricultural and construction equipment.

Quickly replace or add connectors to an existing wiring system—connectors come assembled with wire leads already installed. Also known as weather-pack connectors, they withstand moisture, harsh engine fluids, and high temperatures.

Join two devices with M8 connectors to a single cord, distribution block, or I/O module with M12 connectors to save space and reduce the number of cords in industrial automation setups. Often used with sensors and switches, these splitters send or receive two signals through one connection.

Quickly mate these connectors by pushing them together. They're often used with 12 mm proximity switches and valves in automated systems.

Safely use these connectors with 12 mm proximity switches, console lights, valves, and power supplies in food, beverage, and pharmaceutical applications—they’re FDA compliant for direct food contact.

Because they tightly thread to M12 connections, these connectors won’t let contaminants in or come loose from vibration in rugged industrial environments and automated systems as they send power and signal or just power to your equipment.

Often used to send power and signal to automated systems, motors, and pumps, these mini connectors carry higher currents than M5, M8, and M12 connectors.

Also known as dummy plugs, these plugs close the electrical circuit on your mini connector, so you can safely change devices or repair connections.

Send higher current than M5, M8, and M12 connectors near tough industrial jobs, such as welding and metal machining.

Visually check that your low-current devices with M8 connections are powered up and sending and receiving signals. These connectors illuminate green if they have power and yellow if they have signal.

Send signal and power to low-current devices with M8 connections in food processing and other sanitary applications.

Rated IP69K, these M16 connectors protect against dust, debris, and hot, high-pressure jets of water at high volumes.

Screw these micro M16 connectors together to securely connect equipment.

Connectors come assembled with wire leads already installed, so they can be quickly added to existing wiring systems. Use them with AMP MATE-N-LOK connectors.

Also known as power-pole connectors, these single-pole connectors join two pin connections, rather than a pin and socket. They stack from the top and sides to form any configuration.

Sets include a plug and socket with wire leads already installed, so they can be quickly added to existing wiring systems. They fit standard Molex plugs and sockets.

With thick threads similar to a light bulb, these connectors take only a few turns to lock into place for a secure connection in washdown and high-vibration areas. Detach them just as quickly for frequent maintenance.

Often used with thermosensors or brakes on large motors, these carry more than twice the current of standard latching connectors.

Protect connections while maintaining access. The base and hood latch together securely yet can be quickly detached for equipment repair or replacement.

Build a connector that fits in tight spaces by combining male and female inserts for power and signal with a compact base and a hood.

Configure a connector for your application—combine inserts for power and signal with a base and a hood.

Make secure connections with machine tools, robots, and other equipment that vibrates frequently and carries currents as high as 300 amps.

With a PVC housing, connectors withstand exposure to chemicals, oil, fuel, and salt water.

Reduce the number of electrical connections in sanitary areas, such as food plants—these connectors combine Ethernet, a power cable, and wire for signals into a single connection point.

When used together, connectors maintain a watertight and corrosion-resistant NEMA 4X connection.

Often used in devices that branch off of the main power line, these connectors power high-amperage fans, pumps, and machines in motor controls, conveyors, and sorting and packaging systems.

Rated to MIL-DTL-5015 specifications, these connectors are compatible with other products that meet the same standard. They screw together for a secure connection.

A threaded M8 end on these connectors keeps contaminants out and withstands vibration better than RJ45 ends on traditional Ethernet cords.

Use DC voltage to power devices that run on AC voltage. Also known as inverters and converters.