McMaster-Carr logo
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    Help me decide (beta)
    79 Products

    Extended-Reach C-Clamps

    Image of Product. Iron Body and 3" to 6 1/4" Reach. Front orientation. Contains Annotated. C-Clamps. Extended-Reach C-Clamps, Powder-Coated Iron Body.
    Image of Product. Steel Body and 4" to 6" Reach. Front orientation. Contains Annotated. C-Clamps. Extended-Reach C-Clamps, Steel Body, Sliding T-Handle, Steel Screw.
    Image of Product. Steel Body and 6 1/4" to 15 3/4" Reach. Front orientation. Contains Annotated. C-Clamps. Extended-Reach C-Clamps, Steel Body, Sliding T-Handle, Copper-Plated Steel Screw.

    Iron Body and 3"

    to 6 1/4" Reach

    Steel Body

    and 4" to 6"

    Reach

    Steel Body and 6 1/4"

    to 15 3/4" Reach

    Clamp farther in from the edge of a workpiece than with other C-clamps.
    Steel Body—Steel clamps are stronger than iron clamps.
    Opening
    Max.
    Min.
    Reach
    Lg.
    Holding
    Cap., lb.
    Body
    Ht.
    Screw Material
    Each
    Powder-Coated Iron Body
     
    Sliding T-Handle
    1"0"3"3502 7/8"Black-Oxide Steel5038A1000000
    2"0"3 1/2"4503 3/4"Black-Oxide Steel5038A200000
    2 1/2"0"4 3/4"1,6006 1/8"Black-Oxide Steel5038A700000
    2 1/2"0"6 1/4"1,6006 7/16"Black-Oxide Steel5038A800000
    3"0"4 1/2"7005 11/16"Black-Oxide Steel5038A900000
     
    Steel Body
     
    Sliding T-Handle
    4"0"4"4,1008"Steel5072A100000
    4"0"6 1/4"1,6007"Copper-Plated Steel5038A61000000
    6"0"5"5,40011 1/4"Steel5072A200000
    6"0"9 7/8"1,80010"Copper-Plated Steel5038A62000000
    8"0"13 3/4"2,00011 1/2"Copper-Plated Steel5038A63000000
    8"2"6"5,90013 3/4"Steel5072A3000000
    10"0"15 3/4"2,40014 3/4"Copper-Plated Steel5038A64000000
     

    Long-Reach Bar Clamps

    Image of Product. Front orientation. Contains Annotated. Bar Clamps. Long-Reach Bar Clamps.
    Clamp much farther in from the edge of the workpiece than with standard bar clamps. The clamping arm slides freely along the bar for quick, one-handed positioning. Use the handle for final tightening.
    Opening
    Max.
    Min.
    Reach
    Lg.
    Holding
    Cap., lb.
    Body Material
    Arm
    Material
    Screw Material
    Swivel Range
    of Motion
    Each
    24"0"12"1,550Zinc-Plated SteelIronBlack-Oxide Steel18°5171N10000000
    24"0"20"990Zinc-Plated SteelIronBlack-Oxide Steel18°5171N2000000

    Long-Reach Plastic Pliers Clamps

    Image of Product. Front orientation. Contains Annotated. Pliers Clamps. Long-Reach Plastic Pliers Clamps.
    The long, pivoting jaws let you clamp farther into your workpiece and in tight spots. Use these tools for light duty clamping. Squeeze the handles to close; press the lever to release.
    Opening
    Max.
    Min.
    Reach
    Lg.
    Holding
    Cap., lb.
    Overall
    Lg.
    Lock
    Release
    Body
    Material
    Each
    Serrated Pivoting Jaws
    4"0"3 15/16"859 7/16"LeverPlastic4972A2000000
     

    Bar Clamps for Recessed Areas

    Image of Product. Front orientation. Contains Annotated. Bar Clamps. Bar Clamps for Recessed Areas.
    Also known as J-clamps, these provide additional clearance to reach around obstructions and clamp workpieces in recessed areas. The clamping arm slides freely along the bar for quick, one-handed positioning. Use the handle for final tightening.
    Opening
    Max.
    Min.
    Reach
    Lg.
    Lg.
    Holding
    Cap., lb.
    Body
    Material
    Arm
    Material
    Screw
    Material
    Swivel Range
    of Motion
    Each
    12"0"5 1/2"4"2,660SteelSteelSteel35°7543A110000000
    20"0"7"6"4,880SteelSteelSteel35°7543A14000000

    Long-Reach Spring Clamps

    Image of Product. Front orientation. Contains Annotated. Spring Clamps. Long-Reach Spring Clamps.
    The long, narrow jaws clamp farther into a workpiece and in tight spots. Squeeze the handles to open the clamp; release and the spring holds it tightly in place. Clamps have plastic-covered handles for a comfortable grip. Clamping surfaces are parallel when fully opened.
    Opening
    Jaw
    Max.
    Min.
    Reach
    Lg.
    Holding
    Cap.
    Type
    Wd.
    Material
    Overall
    Lg.
    Each
    Plastic Body
     
    Cushion Grip
    3"0"4"Not RatedFixed7/16"Nylon8 3/4"6109A2600000
     

    Heavy Duty Bench Vises

    For big jobs, these vises have a wider jaw opening, deeper throat depth, and larger footprint than standard vises. They are made in the U.S.A.
    Premium with Flat and Pipe Jaws
    Image of Product. Front orientation. Contains Annotated, Inset. Vises. Heavy Duty Bench Vises, Premium with Flat and Pipe Jaws.
    Premium vises have the strength and durability to handle the toughest industrial applications. Moving parts are enclosed to keep contaminants out and lubrication in for smooth operation. The jaws pull in a straight line to provide even pressure under heavy clamping. Vises have an anvil for bending and shaping material with a hammer.
    Vises with flat and V jaws (also known as pipe jaws) have a second set of jaws that securely grip pipe and other round objects.
    Swivel Base—Vises with swivel base rotate 360° and can be locked in place.
    Vises
    Replacement
    Flat Jaws
    Replacement
    Pipe Jaws
    Flat Jaw
    Pipe Jaw
    Overall
    Mounting
    Holes
    Wd.
    Max.
    Opening
    Texture
    Throat
    Dp.
    For Dia.
    Texture
    Lg.
    Wd.
    Ht.
    Wt.,
    lb.
    Mounting Fasteners
    Included
    No.
    of
    Dia.
    Features
    Each
    Each
    Each
    360° Swivel Base
    3 1/2"5"Serrated4 1/2"1/8" to 2 1/2"Serrated17"8"9"51No41/2"Anvil5200A110000000008467A3200000005344A390000000
    4 1/2"6"Serrated4 3/4"1/8" to 3 1/2"Serrated14"6"9"78No45/8"Anvil5200A12000000008467A350000005200A121000000
    5"7"Serrated5 1/4"1/8" to 4 1/2"Serrated14"7"9"100No45/8"Anvil5200A13000000005200A1510000005200A131000000
    6"9"Serrated6 5/8"1/4" to 6"Serrated18"11"10"205No45/8"Anvil5200A14000000005200A7790000005200A141000000
     
    Premium with Flat Jaws
    Image of Product. Front orientation. Vises. Heavy Duty Bench Vises, Premium with Flat Jaws.
    Premium vises have the strength and durability to handle the toughest industrial applications. Moving parts are enclosed to keep contaminants out and lubrication in for smooth operation. The jaws pull in a straight line to provide even pressure under heavy clamping. Vises have an anvil for bending and shaping material with a hammer.
    Swivel Base—Vises with swivel base rotate 360° and can be locked in place.
    Vises
    Replacement
    Flat Jaws
    Jaw
    Overall
    Mounting
    Holes
    Wd.
    Max.
    Opening
    Texture
    Throat
    Dp.
    Lg.
    Wd.
    Ht.
    Wt.,
    lb.
    Mounting Fasteners
    Included
    No.
    of
    Dia.
    Features
    Each
    Each
    360° Swivel Base
    3"4 3/4"Serrated2 5/8"12"5"8"30No43/8"Anvil5298A1200000008467A120000000
    4"6 1/2"Serrated3 1/2"14"6"8"62No45/8"Anvil5298A14000000008467A34000000
    5"8"Serrated4 1/4"14"8"8"96No45/8"Anvil5298A16000000008467A36000000
    6"10"Serrated5 1/2"16"8"9"160No45/8"Anvil5298A17000000008467A17000000
     
    Industrial with Flat Jaws
    Industrial vises offer high quality at a lower price than premium vises.
    Swivel Base—Vises with swivel base rotate 360° and can be locked in place.
    Vises
    Replacement
    Flat Jaws
    Jaw
    Overall
    Mounting
    Holes
    Wd.
    Max.
    Opening
    Texture
    Throat
    Dp.
    Lg.
    Wd.
    Ht.
    Wt.,
    lb.
    Mounting Fasteners
    Included
    No.
    of
    Dia.
    Each
    Each
    Fixed Base
    Image of Product. Front orientation. Vises. Heavy Duty Bench Vises, Industrial with Flat Jaws, Fixed Base.
    3"4"Serrated2 1/2"13 1/4"3"6 1/2"27No31/2"5286A100000008469A210000000
    3 1/2"5"Serrated2 3/4"15"3 1/2"7"35No31/2"5286A80000008469A22000000
    4"6"Serrated3 1/4"17"4"8"50No31/2"5286A30000008469A23000000
    4 1/2"7"Serrated3 1/2"18 1/2"4 1/2"8 3/4"60No31/2"5286A40000008469A24000000
    5"8"Serrated3 1/2"22"5"12 1/2"79No31/2"5286A50000008469A25000000
    6"10"Serrated4"25 1/2"6"10 1/2"125No313/16"5286A6000000008469A48000000
    8"12"Serrated5 1/2"29"8"12 1/2"190No313/16"5286A7000000008469A49000000
     
    360° Swivel Base
    Image of Product. Front orientation. Vises. Heavy Duty Bench Vises, Industrial with Flat Jaws, Swivel Base.
    3"4"Serrated2 1/2"13 1/4"3"7 3/4"34No39/16"5287A10000008469A21000000
    3 1/2"5"Serrated2 3/4"15"3 1/2"8 1/4"42No39/16"5287A20000008469A22000000
    4"6"Serrated3 1/4"17"4"9 1/4"58No39/16"5287A30000008469A23000000
    4 1/2"7"Serrated3 1/2"18 1/2"4 1/2"10"68No39/16"5287A40000008469A24000000
    5"8"Serrated3 1/2"22"5"10 3/4"91No39/16"5287A5000000008469A25000000
    6"10"Serrated4"25 1/2"6"12 1/4"145No39/16"5287A6000000008469A48000000
    8"12"Serrated5 1/2"29"8"14 1/4"210No39/16"5287A7000000008469A49000000
     

    Circuit Board Vises

    Use both hands to position and solder components to your circuit board. These vises keep your board stable on a flat surface.
    With Flat Jaws
    Image of Product. Front orientation. Vises. Circuit Board Vises.
    Image of ProductInUse. Shown with Component Positioning Stand (Sold Separately). Front orientation. Electronic-Component Positioning Stands. Circuit Board Vises.
    Image of Product. Back orientation. Electronic-Component Positioning Stands. Circuit Board Vises.

    Shown with Component Positioning Stand

    (Sold Separately)

    Electronic-Component

    Positioning Stands

    Electronic-Component Positioning Stands—Electronic-component positioning stands (sold separately) keep components in place as you solder them through your board.
    Vises
    Electronic-Component
    Positioning Stands
    Jaw
    Wd.
    Max.
    Opening
    Material
    Texture
    Replaceable
    Body
    Material
    For Max. Circuit
    Board Thk.
    Mount Type
    Rod
    Material
    Each
    Each
    Fixed Base
    3"6 1/8"PlasticGroovedYesAluminum1/16"FreestandingSteel5541N110000005604N1100000
     

    Static-Control Circuit Board Vises

    Rotate these vises to solder both the front and back of your circuit board while preventing static charges from damaging your components. Plastic jaws slowly drain static charges away, minimizing the buildup of electrostatic discharge (ESD). To make soldering components through the holes on your board easier, these vises have a positioning arm that holds your component. This allows you to rotate the board and solder on the opposite side without you needing to hold the component.
    With Flat Jaws
    Image of ProductInUse. Front orientation. Vises. Static-Control Circuit Board Vises.
    Image of Product. Front orientation. Contains Annotated. Vises. Static-Control Circuit Board Vises.
    Jaw
    Wd.
    Max.
    Opening
    Material
    Texture
    Replaceable
    Body
    Material
    For Max. Circuit
    Board Thk.
    Max. Range
    of Motion
    Mount Type
    Surface Resistance,
    ohm
    Rod
    Material
    Features
    Each
    Fixed Base
    1 11/16"9 1/4"PlasticGroovedNoPlastic5/16"360°Freestanding1× 10^9 to 1× 10^11SteelPositioning Arm5711N110000000
     

    Tilting-Head Circuit Board Vises

    Image of ProductInUse. Front orientation. Vises. Tilting-Head Circuit Board Vises.
    Position your circuit board at a comfortable angle when attaching components. These vises rotate, so you can access the back of your board.
    With Flat Jaws
    Image of Product. Front orientation. Contains Annotated. Vises. Tilting-Head Circuit Board Vises, With Flat Jaws, Fixed Base, 2 7/8" Maximum Jaw Opening.
    Image of Product. Front orientation. Contains Annotated. Vises. Tilting-Head Circuit Board Vises, With Flat Jaws, Fixed Base, 10" Maximum Jaw Opening.

    Fixed Base

    2 7/8" Maximum Jaw Opening

    Fixed Base

    10" Maximum Jaw Opening

    Solder Spool Holder and Soldering Iron Holder—Vises with soldering spool and soldering iron holders keep your material and tools nearby. The soldering spool holder feeds solder wire as your work. When you need to set down your hot iron, rest it in the holder instead of on your work surface.
    Jaw
    Mounting Holes
    Wd.
    Max.
    Opening
    Material
    Texture
    Replaceable
    Body
    Material
    For Max. Circuit
    Board Thk.
    Max. Range
    of Motion
    Tilt Range
    of Motion
    Mount
    Type
    Mounting Fasteners
    Included
    No.
    of
    Dia.
    Ctr.-to-Ctr.
    Features
    Each
    Fixed Base
    2"2 7/8"PlasticGroovedYesZinc5/16"360°210°Bolt OnNo31/4"3 1/2"—8464A47000000
    6 1/4"10"AluminumGroovedYesZinc5/32"360°90°Bolt OnNo31/4"3 3/4"Six Compartment Tray Base
    Solder Spool Holder
    Soldering Iron Holder    		8464A48000000
     

    Extra-Wide-Opening Bench Vises

    The movable jaw can be repositioned to extend the jaw opening. Pull out the entire sliding section and insert it on the opposite side of the vise. In addition to flat jaws, these vises have V jaws (also known as pipe jaws) that securely grip pipe and other round objects. The base swivels 360° and can be locked in place. Use the anvils for bending and shaping material with a hammer.
    With Flat and Pipe Jaws
    Image of Product. Jaw Repositioned to Extend Opening. Front orientation. Vises. Extra-Wide-Opening Bench Vises.
    Image of Product. Front orientation. Contains Annotated, Inset. Vises. Extra-Wide-Opening Bench Vises.

    Jaw Repositioned to Extend

    Opening

    Vises
    Replacement
    Flat Jaws
    Flat Jaw
    Overall
    Mounting
    Holes
    Wd.
    Max. Opening
    Material
    Texture
    Pipe Jaw
    For Dia.
    Throat
    Dp.
    Lg.
    Wd.
    Ht.
    Wt.,
    lb.
    Body
    Material
    Mount
    Type
    Mounting Fasteners
    Included
    No.
    of
    Dia.
    Features
    Each
    Each
    360° Swivel Base
    5 1/2"6"/9 3/4"SteelSerrated1/8" to 3"3 3/4"16 1/2"10"9 3/4"52IronBolt OnNo45/8"Two Anvils4065A100000008467A25000000
    8"9 1/4"/14 1/2"Iron
    		Serrated3/8" to 4"4 3/4"19 1/2"8 1/2"10 7/8"75IronBolt OnNo41/2"Two Anvils4065A130000005344A7600000
     

    Extra-Wide-Opening Tilting-Head Bench Vises

    For large workpieces, these vises open three times as wide as industrial tilting-head vises. The head tilts, rotates, and locks in place to hold your work at an angle. Vises have one smooth jaw and one grooved jaw for clamping flat, round, and uneven workpieces. The 5-lb. weighted base is heavy enough to keep the vise in place but light enough to be portable. For temporary mounting, add a clamp-on base (sold separately).
    With Flat Jaws
    Image of Product. 6" Max. Jaw Opening. Front orientation. Contains Annotated. Vises. Extra-Wide-Opening Tilting-Head Bench Vises, With Flat Jaws, Fixed Base, 1 1/2" Wide Jaw, 6" Maximum Jaw Opening, Freestanding.
    Image of Product. 9" Max. Jaw Opening. Front orientation. Contains Annotated. Vises. Extra-Wide-Opening Tilting-Head Bench Vises, With Flat Jaws, Fixed Base, 1 1/2" Wide Jaw, 9" Maximum Jaw Opening, Freestanding.

    6" Max. Jaw Opening

    9" Max. Jaw Opening

    Self-Centering Jaws—Vise with self-centering jaws has jaws that move at the same time to keep parts in the center of the vise.
    Vises
    Clamp-On Base
    Jaw
    Overall
    Wd.
    Max.
    Opening
    Material
    Texture
    Replaceable
    Throat
    Dp.
    Lg.
    Wd.
    Ht.
    Wt.,
    lb.
    Body
    Material
    Max. Range
    of Motion
    Tilt Range
    of Motion
    Mount Type
    Base Wt.,
    lb.
    Features
    Each
    Each
    Fixed Base
    1 1/2"6"RubberSerrated, GroovedYes1 7/8"11"5"7 1/4"7.6Aluminum360°90°Freestanding5—8464A9100000008464A41000000
    1 1/2"9"RubberSerrated, GroovedYes1 7/8"11 1/2"5"7 1/2"7.7Aluminum360°90°Freestanding5Self-Centering Jaws8464A920000008464A4100000
     

    Stainless Steel Bench Vises for Washdown Applications

    Made of 304 stainless steel to stand up to washdown environments, such as food and beverage production, these are the most corrosion-resistant vises we offer. They have flat jaws and include two additional pairs of nonmarring jaws: one smooth plastic and one smooth stainless steel.
    With Flat and Pipe Jaws
    Image of Product. Front orientation. Vises. Stainless Steel Bench Vises for Washdown Applications, With Flat and Pipe Jaws, Fixed Base.
    Image of Product. Front orientation. Vises. Stainless Steel Bench Vises for Washdown Applications, With Flat and Pipe Jaws, Swivel Base.
    Image of Specification. Pipe Jaws. Front orientation. ZoomedIn view. Contains Border. Pipe Jaws. Stainless Steel Bench Vises for Washdown Applications.

    Fixed Base

    Swivel Base

    Pipe Jaws

    Swivel Base—Vises with swivel base rotate 360° and can be locked in place.
    Flat
    Jaw
    Pipe
    Jaw
    Overall
    Mounting
    Holes
    Wd.
    Max.
    Opening
    Wd.
    For Dia.
    Jaw Material
    Jaw
    Texture
    Includes
    Throat
    Dp.
    Lg.
    Wd.
    Ht.
    Wt.,
    lb.
    Mounting Fasteners
    Included
    No.
    of
    Dia.
    Each
    Fixed Base
    6"10"1 3/4"1/4" to 3 1/2"304 Stainless SteelSerratedOne Pair of Smooth 304 Stainless Steel Flat Jaws
    One Pair of Smooth Plastic Flat Jaws    		5"21 1/4"6 3/4"7 1/4"36No29/16"5310A17000000000
     
    360° Swivel Base
    6"10"1 3/4"1/4" to 3 1/2"304 Stainless SteelSerratedOne Pair of Smooth 304 Stainless Steel Flat Jaws
    One Pair of Smooth Plastic Flat Jaws    		5"21 1/4"8"9"46No31/2"5310A1800000000
     
    Replacement Vise Jaws
    Image of Product. Front orientation. Vise Jaws. Stainless Steel Bench Vises for Washdown Applications, Flat Jaw.
    Image of Product. Front orientation. Vise Jaws. Stainless Steel Bench Vises for Washdown Applications, Pipe Jaw.

    Flat Jaw

    Pipe Jaw

    Jaw
    Wd.
    Texture
    Mounting Hole
    Ctr.-to-Ctr.
    Mounting Fasteners
    Included
    Each
    304 Stainless Steel Flat Jaws
    6"Serrated4 1/4"Yes5289A470000000
    6"Smooth4 1/4"Yes5289A48000000
     
    Nylon Flat Jaws
    6"Smooth4 1/4"Yes5289A4900000
     
    304 Stainless Steel Pipe Jaw
    1 3/4"Serrated—Yes5310A94000000
     

    Freestanding Pipe Vises

    Image of ProductInUse. Front orientation. Vises. Freestanding Pipe Vises, Chain Style.
    Image of ProductInUse. Front orientation. Vises. Freestanding Pipe Vises, Yoke and Chain Style.

    Chain Style

    Yoke and Chain Style

    Hold pipe and conduit for cutting, threading, and assembly just about anywhere.
    Chain Style—Grip workpieces of any shape. The chain can secure pipe as well as bar stock, valves, and other irregularly shaped objects that yoke-style vises can’t hold. Crank the handle to pull your workpiece tight against the bottom jaw.
    Yoke and Chain Style—Get a grip on exceptionally large pipe. These vises have jaws that clamp down like a yoke-style vise and a chain that wraps around the pipe for stability.
    Pipe Bending Slots— Make small bends in pipe to line it up with fittings for installation.
    Jaw
    Overall
    For Pipe
    Size
    For Dia.
    Material
    Texture
    Body
    Material
    Leg
    Material
    Wt.,
    lb.
    Lg.
    Wd.
    Ht.
    Leg
    Type
    Features
    Each
    Chain Style
    1/8 to 1213/32" to 12 5/8"SteelSerratedIronSteel6151 1/2"37"48"FoldingLeveling Leg
    Pipe Bending Slots
    Tool Tray    		5340A110000000
     
    Yoke and Chain Style
    2 to 202 3/8" to 20"SteelSmoothIronSteel6888 3/4"54 1/2"32 1/2"Fixed—5340A11100000000
     
    back to top