Take depth measurements in dirty machining environments. These micrometers are rated IP65, so they seal out oil, water, and dust. They come with multiple extension rods that you can swap out depending on the depth of your holes, slots, shoulders, or projections. They have a ratchet-stop thimble with a speeder knob to reduce the time it takes to open and close the micrometer. For repeatable measurements, the thimble stops turning once the spindle reaches your part to prevent overtightening. However, the speeder knob will continue to turn with a clicking sound. These micrometers have zero-position memory, also known as absolute (ABS) positioning, so they retain the measuring position after you turn the micrometer off. A zero-set button lets you start measuring at any point.

USB data cables (sold separately) connect the micrometer directly to your PC.

Wireless data transmitters and receivers (both sold separately) allow you to send measurement data from a micrometer to your PC without being tethered by a cable.

These gauges come with a calibration certificate traceable to NIST that states they've passed a test for accuracy. All are IP67 rated for protection from dust and temporary water submersion. They have zero-position memory, also known as absolute (ABS) positioning, which retains the measuring position when the gauge is turned off. A zero-set button lets you start measuring at any point. SPC data output allows for connection to a computer or data processor.

USB data cable (sold separately) connects the gauge directly to your PC.

10-pin data cables (sold separately) connect the gauge to a Mitutoyo miniprocessor or multiplexer.

Wireless data transmitter and receiver (sold separately) allow you to transmit measurement data from the gauge to your PC without being tethered by a cable.

Base extensions (sold separately) increase the base width of your depth gauge to measure large diameter holes.

For technical drawings and 3-D models, click on a part number.