T-Slotted Framing Mounts for Monitors and Computer Accessories
Attach and position phones, tablets, monitors, and computer accessories on T-slotted rails.
For technical drawings and 3-D models, click on a part number.



Monitor mounts have a VESA (Video Electronics Standards Association) standard mounting hole pattern, so they will match most monitors. They fit in tight spaces because they mount directly to T-slotted rails. Friction monitor mounts stay in place if bumped, but they require you to move the entire weight of the monitor.
For Rail Ht. | Overall | Monitor | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Style | Single | Double, Quad | Triple | Projection | Ht. | Wd. | Max. Load Capacity, lbs. | For Monitor Size | Mount Type | Mounting Hole Pattern Compatibility | Color | Material | Mounting Fasteners Included | Each | |
Rotate | |||||||||||||||
A | 1 1/2" 40mm 45mm | 3" 80mm 90mm | 4 1/2" 120mm | 1" | 4 1/2" | 4 1/2" | 10 | 12"-24" | Friction | VESA 75 × 75 VESA 100 × 100 | Black | Plastic | Yes | 0000000 | 000000 |
Tilt | |||||||||||||||
B | 45mm | 90mm | __ | 1" | 4 17/32" | 5 9/16" | 26 | 12"-24" | Friction | VESA 75 × 75 VESA 100 × 100 | Silver | Anodized Aluminum | Yes | 0000000 | 00000 |
Rotate, Tilt | |||||||||||||||
C | 1 1/2" 40mm | 3" 80mm | 4 1/2" 120mm | 3" | 4 7/16" | 4 7/16" | 10 | 12"-24" | Friction | VESA 75 × 75 VESA 100 × 100 | Black | Plastic | Yes | 000000000 | 00000 |



Monitor mounts have a VESA (Video Electronics Standards Association) standard mounting hole pattern, so they will match most monitors. Friction monitor mounts stay in place if bumped, but they require you to move the entire weight of the monitor. Counterbalance monitor mounts offset the weight of the monitor for easy adjustment but shift out of place easily if bumped.
Mounts with a positioning arm extend and adjust to accommodate multiple users. Move them out of the way when not in use.
For Rail Ht. | Overall | Monitor | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Style | Single | Double, Quad | Triple | Projection | Ht. | Wd. | Max. Load Capacity, lbs. | For Monitor Size | Mount Type | Mounting Hole Pattern Compatibility | Color | Material | Mounting Fasteners Included | Each | |
Rotate, Side-to-Side, Tilt, In/Out | |||||||||||||||
D | 45mm | 90mm | __ | 14 3/16" | 4 17/32" | 5 9/16" | 26 | 12"-24" | Friction | VESA 75 × 75 VESA 100 × 100 | Silver | Anodized Aluminum | Yes | 0000000 | 0000000 |
Rotate, Side-to-Side, Tilt, Up/Down | |||||||||||||||
E | 1 1/2" 40mm 45mm | 3" 80mm 90mm | 4 1/2" 120mm | 17 3/16" | 14 9/32" | 4 7/16" | 20 | 12"-24" | Counterbalance | VESA 75 × 75 VESA 100 × 100 | Silver | Lacquer-Coated Aluminum | Yes | 00000000 | 000000 |
F | 1 1/2" 40mm 45mm | 3" 80mm 90mm | 4 1/2" 120mm | 25" | 21 1/4" | 4 7/16" | 20 | 12"-24" | Counterbalance | VESA 75 × 75 VESA 100 × 100 | Silver | Powder-Coated Aluminum | Yes | 0000000 | 000000 |

For Rail Ht. | Overall | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Style | Single | Double, Quad | Triple | Ht. | Wd. | Dp. | Max. Load Capacity, lbs. | Color | Material | Mounting Fasteners Included | Each | |
G | 1 1/2" 40mm | 3" 80mm | 4 1/2" 120mm | 1 5/16" | 24 13/16" | 12 5/8" | 66 | Silver | Anodized Aluminum | Yes | 0000000 | 0000000 |

Mounts with a positioning arm extend and adjust to accommodate multiple users. Move them out of the way when not in use.
For Rail Ht. | Overall | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Style | Single | Double, Quad | Triple | Projection | Ht. | Wd. | Max. Load Capacity, lbs. | Color | Material | Mounting Fasteners Included | Each | |
Rotate, Side-to-Side, In/Out | ||||||||||||
H | 1 1/2" 40mm | 3" 80mm | 4 1/2" 120mm | 26 7/16" | 3 15/16" | 20 11/16" | 26 | Silver | Powder-Coated Aluminum | Yes | 0000000 | 0000000 |

Mounts with a positioning arm extend and adjust to your needs. Move them out of the way when not in use.
For Rail Ht. | Overall | Monitor | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Style | Single | Double, Quad | Triple | Projection | Ht. | Wd. | Max. Load Capacity, lbs. | For Monitor Size | Mount Type | Mounting Hole Pattern Compatibility | Color | Material | Mounting Fasteners Included | Each | |
Rotate, Side-to-Side, Tilt, Up/Down | |||||||||||||||
J | 1 1/2" 40mm | 3" 80mm | 4 1/2" 120mm | 37" | 19 1/16" | 18 1/2" | 20 | 12"-24" | Counterbalance | VESA 75 × 75 VESA 100 × 100 | Silver | Powder-Coated Aluminum | Yes | 0000000 | 0000000 |

For Rail Ht. | For Device | Overall | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Style | Single | Double, Quad | Triple | Wd. | Ht. | Ht. | Wd. | Dp. | Max. Load Capacity, lbs. | Color | Material | Mounting Fasteners Included | Each | |
K | 1 1/2" 40mm | 3" 80mm | 4 1/2" 120mm | 3 5/32"-9 7/16" | 12 7/32"-20 13/16" | 25" | 9 1/2" | 13 3/8" | 66 | Silver | Powder-Coated Aluminum | Yes | 0000000 | 0000000 |

For Rail Ht. | Overall | Monitor | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Style | Single | Double, Quad | Triple | For Device Wd. | Ht. | Wd. | Dp. | Max. Load Capacity, lbs. | For Monitor Size | Mount Type | Mounting Hole Pattern Compatibility | Color | Material | Mounting Fasteners Included | Each | |
L | 1 1/2" 40mm | 3" 80mm | 4 1/2" 120mm | 1 13/32"-1 15/16" | 4 1/2" | 4 1/2" | 2 3/16" | 22 | 12"-24" | Fixed | VESA 75 × 75 VESA 100 × 100 | Silver | Powder-Coated Aluminum | Yes | 0000000 | 000000 |

Hand-held device mounts have adjustable grips for a secure hold on your device.
Mounts with a ball-grip positioning arm extend and adjust to accommodate multiple users. They have a ball-and-socket connection for 360° positioning. Move them out of the way when not in use.
For Rail Ht. | Overall | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Style | Single | Double, Quad | Triple | For Device Wd. | Projection | Ht. | Wd. | Max. Load Capacity, lbs. | Color | Material | Mounting Fasteners Included | Each | |
Rotate, Side-to-Side, Tilt, In/Out, Up/Down | |||||||||||||
M | 1" 1 1/2" 30mm 40mm 45mm | 2" 3" 60mm 80mm 90mm | 3" 4 1/2" 120mm | 1 7/8"-3 1/4" | 7 1/2" | 3 1/4" | 3 1/4" | 1 | Black | Powder-Coated Aluminum | Yes | 000000000 | 000000 |

Tablet mounts have adjustable grips for a secure hold on your device.
Mounts with a ball-grip positioning arm extend and adjust to accommodate multiple users. They have a ball-and-socket connection for 360° positioning. Move them out of the way when not in use.
For Rail Ht. | Overall | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Style | Single | Double, Quad | Triple | For Device Wd. | Projection | Ht. | Wd. | Max. Load Capacity, lbs. | Color | Material | Mounting Fasteners Included | Each | |
Rotate, Side-to-Side, Tilt, In/Out, Up/Down | |||||||||||||
N | 1" 1 1/2" 30mm 40mm 45mm | 2" 3" 60mm 80mm 90mm | 3" 4 1/2" 120mm | 6 1/4"-8 3/32" | 8 1/16" | 10 1/4" | 8 1/8" | 3 | Black | Powder-Coated Aluminum | Yes | 00000000 | 0000000 |
T-Slotted Framing Positioning Arms




Make your T-slotted framing workstation more ergonomic. These positioning arms let you move tools and other items within reach, reducing fatigue and streamlining repetitive processes.
Extended positioning arms lock into position when you tighten the screws in the joints. Those with a cable-routing hole are hollow, so you can route cables through them.
Ball-grip positioning arms have ball-and-socket connections, so the entire arm moves 360°. Secure items using the mounting plate.
Arms with AMPS mounting hole pattern are often used on GPS units, cameras, and other small electronics.
For technical drawings and 3-D models, click on a part number.
For Rail Ht. | Attaching End | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Single | Double, Quad | Triple | Projection | Overall Ht. | Max. Load Capacity, lbs. | Color | Material | Mount Type | Fasteners Included | Mounting Hole Pattern Compatibility | Mounting Fasteners Included | Each | |
Positioning Arm | |||||||||||||
Rotate, Side-to-Side, In/Out | |||||||||||||
1 1/2" 40mm | 3" 80mm | 4 1/2" 120mm | 14 5/8" | 3 7/8" | 26 | Silver | Anodized Aluminum | T-Slot | Yes | __ | Yes | 0000000 | 0000000 |
1 1/2" 40mm | 3" 80mm | 4 1/2" 120mm | 14 5/8" | 7 5/16" | 89 | Silver | Anodized Aluminum | T-Slot | Yes | __ | Yes | 0000000 | 000000 |
Extended Positioning Arm | |||||||||||||
Rotate, Side-to-Side, In/Out | |||||||||||||
1 1/2" 40mm | 3" 80mm | 4 1/2" 120mm | 27 3/8" | 5 3/4" | 17 | Silver | Anodized Aluminum | T-Slot | Yes | __ | Yes | 0000000 | 000000 |
1 1/2" 40mm | 3" 80mm | 4 1/2" 120mm | 27 3/8" | 9 7/16" | 31 | Silver | Anodized Aluminum | T-Slot | Yes | __ | Yes | 0000000 | 000000 |
Ball-Grip Positioning Arm | |||||||||||||
Rotate, Side-to-Side, Tilt, In/Out, Up/Down | |||||||||||||
1" 1 1/2" 30mm 40mm 45mm | 2" 3" 60mm 80mm 90mm | 3" 4 1/2" 120mm | 5 3/8" | 3 1/4" | 3 | Black | Powder-Coated Aluminum | Plate | No | AMPS | Yes | 000000000 | 00000 |
Extended Ball-Grip Positioning Arm with Cable Routing Hole | |||||||||||||
Rotate, Side-to-Side, Tilt, In/Out, Up/Down | |||||||||||||
1" 1 1/2" 40mm | 2" 3" 80mm | 3" 4 1/2" 120mm | 11 7/16" | 4 5/16" | 30 | Black/Blue | Anodized Aluminum | Plate | No | BOA Cognex Checker 100 Cognex In-Sight 5000 DALSA DVT Legend 500 Dataman 100/200 Keyence IV-500/150/2000 | Yes | 00000000 | 000000 |
Laptop Stands


Elevate your laptop screen to eye level with these stands to improve posture and reduce back and neck strain. Made of a single piece of aluminum, they provide a stable surface for typing. Run charging cables and other cords through the cable cutout to keep them organized and reduce clutter. For the most ergonomic work experience, use these laptop stands with a separate keyboard and mouse.
360° swivel stands rotate, so you can turn your laptop to face any direction without lifting the stand.
Tablet Stands





Prop up and display tablet computers to keep your hands free for touching, swiping, and other tasks. They’re compatible with most tablets 13" and smaller. A cable routing hole lets you charge tablets while they're in these stands.
Stands with an adjustable viewing angle help you get a better look at tablets.
Style A is compatible with tablets up to 0.47" thick.
Style B have an adjustable height, so you can minimize neck and back strain by setting them to eye level.
Style | Capacity, lbs. | Height | Width | Depth | Viewing Angle | Material | Features | Each | |
Silver | |||||||||
---|---|---|---|---|---|---|---|---|---|
A | 15 | 5 3/4" | 4 5/8" | 7 1/4" | 10° to 50° | Anodized Aluminum | Adjustable Viewing Angle, Cable Routing Hole | 0000000 | 000000 |
B | 15 | 6 3/4" to 10 5/8" | 5 3/4" | 7 1/8" | 0° to 45° | Anodized Aluminum | Adjustable Height, Adjustable Viewing Angle, Cable Routing Hole | 0000000 | 00000 |
Gray | |||||||||
A | 15 | 5 1/4" | 4 1/8" | 6" | __ | Anodized Aluminum | Cable Routing Hole | 0000000 | 00000 |
A | 15 | 5 3/4" | 4 5/8" | 7 1/4" | 10° to 50° | Anodized Aluminum | Adjustable Viewing Angle, Cable Routing Hole | 0000000 | 00000 |
Freestanding Easy-Flip Display Binders with Silver Ion Finish
Display documents on a desktop or other flat surface using these binders, which have a sanitary design. They contain a silver ion compound that prevents the growth of bacteria, mold, and other microbes, limiting the spread of germs as people flip through them. These binders are good for offices, warehouses, clinics, hospitals, and other shared spaces. Made of steel, they stand up to the wear and tear of daily use.
Binders come with 10 protectors for holding documents such as menus, pamphlets, operating instructions, and safety procedures. These protectors are plastic, so they shield fragile paper from rips, tears, and liquid. They remain rigid as you flip through them thanks to their reinforced edges. Snap them in and out of the binders as needed. Each binder can hold up to two additional bindings.
Use index tabs to mark specific pages and organize your binder.
Freestanding Easy-Flip Display Binders
Place these on top of a machine or table, then relocate them as you see fit. Rigid document protectors allow you to quickly flip through these carousel-style binders. Protectors snap in and out. Each binding holds up to ten protectors.
Multi-document protectors have four clear plastic sleeves attached to single rigid protector, so you can place more documents on your binder.
Index tabs clip onto document protectors to organize your binder.

For Document | ||||||
---|---|---|---|---|---|---|
Wd. | Lg. | For Paper Size | Material | Includes | Each | |
8 1/2" | 11" | Letter | Steel | 30 Clear Plastic Document Protectors with Reinforced Colored Edges, 30 Index Tabs, Three Bindings | 0000000 | 0000000 |

Multi-document protectors have four clear plastic sleeves attached to a single rigid protector sleeve, so you can place more documents in your binder.
Material | For Max. No. of Sheets | Features | Color | Edge Color | Each | |
Plastic | 10 | 1 Rigid Plastic Protector Sleeve, Four Clear Plastic Sleeves, Reinforced Colored Edges | Clear | Blue | 000000 | 000000 |

Material | Color | Pkg. Qty. | Pkg. | |
Plastic | Clear | 10 | 000000 | 00000 |
Document Organizers




Compartment | Overall | |||||||
---|---|---|---|---|---|---|---|---|
Style | No. of | Adjustability | Ht. | Wd. | Dp. | Color | Each | |
Plastic | ||||||||
A | 1 | Fixed | 2 3/4" | 13 1/4" | 9" | Black | 00000000 | 00000 |
A | 1 | Fixed | 2 3/4" | 16 1/4" | 9" | Black | 00000000 | 0000 |
Steel | ||||||||
B | 5 | Fixed | 11 1/4" | 12" | 9 1/2" | Black | 00000000 | 00000 |
B | 6 | Fixed | 13 1/4" | 12" | 9 1/2" | Black | 00000000 | 00000 |
C | 5 | Fixed | 8 1/4" | 12 1/2" | 11 1/4" | Black | 0000000 | 00000 |
C | 8 | Fixed | 8 1/4" | 19 1/4" | 11 1/4" | Black | 0000000 | 00000 |
D | 6 | Fixed | 5 1/4" | 12 1/2" | 5 1/4" | Black | 0000000 | 00000 |
D | 6 | Fixed | 8 1/4" | 16" | 11 1/4" | Black | 00000000 | 00000 |
Tabletop Sit-Stand Workstations
Change any desk or table into a stand-up-height work surface. Raise and lower these workstations with a lever—you don't need to clear the surface to adjust the height. The air cylinder makes adjustments smooth and even. To keep wrists comfortable while working and typing, these workstations have chamfered edges.
For a comfortable computer setup, use workstations with a keyboard tray. The tray has space for a keyboard and mouse, and the monitor platform is wide enough for two standard monitors. Organize your cords using cutouts at the back of the keyboard tray.


O'all | Top | Frame | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Wd. | Dp. | Ht. | Work Surface Style | Color | Cap., lbs. | Material | Color | Adjustment Type | Assembled or Unassembled | Features | Each | |
Black Plastic Laminate Top | ||||||||||||
29" | 17 3/4" | 1 3/4"-15 3/4" | Flat | Black | 20 | Powder-Coated Steel | Black | Lever | Assembled | Air Cylinder | 0000000 | 0000000 |
![]() Workstation with Keyboard Tray | ![]() Black |
![]() Light Brown Woodgrain |
O'all | Monitor Platform | Keyboard Tray | Frame | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Wd. | Dp. | Ht. | Work Surface Style | Wd. | Dp. | Cap., lbs. | Wd. | Dp. | Material | Color | Adjustment Type | Assembled or Unassembled | Features | Each | |
Black Plastic Laminate Monitor Platform | |||||||||||||||
32" | 23 1/2" | 5 1/4"-15 1/2" | Flat | 32" | 13 3/4" | 35 | 27 3/4" | 9 3/4" | Powder-Coated Steel | Black | Lever | Assembled | Air Cylinder, Cutouts for Routing Cords | 0000000 | 0000000 |
Light Brown Woodgrain Plastic Laminate Monitor Platform | |||||||||||||||
32" | 23 1/2" | 5 1/4"-15 1/2" | Flat | 32" | 13 3/4" | 35 | 27 3/4" | 9 3/4" | Powder-Coated Steel | Black | Lever | Assembled | Air Cylinder, Cutouts for Routing Cords | 0000000 | 000000 |
Upper Shelves for Workbenches




Shelf | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
No. of Shelves | For Top Wd. | Dp. | Ht. | Backstop Ht. | Gauge | Clearance | Cap., lbs. | Type | Mtg. Fasteners Included | Assembled or Unassembled | Features | Choose a Color | Each | |
Powder-Coated Steel | ||||||||||||||
1 | 36" | 10 1/2" | 12" | 2" | 16 | 11" | 150 | Fixed | No | Assembled | __ | 0000000 | 000000 | |
1 | 48" | 10 1/2" | 12" | 2" | 16 | 11" | 150 | Fixed | No | Assembled | __ | 0000000 | 00000 | |
1 | 60" | 10 1/2" | 12" | 2" | 16 | 11" | 150 | Fixed | No | Assembled | __ | 0000000 | 00000 | |
1 | 72" | 10 1/2" | 12" | 2" | 16 | 11" | 150 | Fixed | No | Assembled | __ | 0000000 | 000000 | |
1 | 96" | 10 1/2" | 12" | 2" | 16 | 11" | 150 | Fixed | No | Assembled | __ | 0000000 | 000000 | |
2 | 36" | 10 1/2" | 12" | 2" | 16 | 6" | 150 | Fixed | No | Assembled | Removable Dividers | 0000000 | 000000 | |
2 | 48" | 10 1/2" | 12" | 2" | 16 | 6" | 150 | Fixed | No | Assembled | Removable Dividers | 0000000 | 000000 | |
2 | 60" | 10 1/2" | 12" | 2" | 16 | 6" | 150 | Fixed | No | Assembled | Removable Dividers | 0000000 | 000000 | |
2 | 72" | 10 1/2" | 12" | 2" | 16 | 6" | 150 | Fixed | No | Assembled | Removable Dividers | 0000000 | 000000 | |
2 | 96" | 10 1/2" | 12" | 2" | 16 | 6" | 150 | Fixed | No | Assembled | Removable Dividers | 0000000 | 000000 |
Adjustable Upper Shelves for Workbenches


Position these shelves at any angle. They can be reversed so the backstop is at the front to hold books and literature.
Shelf | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
No. of Shelves | For Top Wd. | Dp. | Ht. | Backstop Ht. | Gauge | Cap., lbs. | Type | Mtg. Fasteners Included | Assembled or Unassembled | Color | Each | |
Powder-Coated Steel | ||||||||||||
2 | 60" | 13 1/2" | 24" | 1 3/4" | 14 | 125 | Reversible, Tiltable | Yes | Unassembled | Gray | 00000000 | 0000000 |
2 | 60" | 13 1/2" | 36" | 1 3/4" | 14 | 125 | Reversible, Tiltable | Yes | Unassembled | Gray | 00000000 | 000000 |
2 | 72" | 13 1/2" | 24" | 1 3/4" | 14 | 100 | Reversible, Tiltable | Yes | Unassembled | Gray | 00000000 | 000000 |
2 | 72" | 13 1/2" | 36" | 1 3/4" | 14 | 100 | Reversible, Tiltable | Yes | Unassembled | Gray | 00000000 | 000000 |
3 | 60" | 13 1/2" | 36" | 1 3/4" | 14 | 125 | Reversible, Tiltable | Yes | Unassembled | Gray | 00000000 | 000000 |
3 | 72" | 13 1/2" | 36" | 1 3/4" | 14 | 100 | Reversible, Tiltable | Yes | Unassembled | Gray | 00000000 | 000000 |
Stainless Steel Upper Shelves for Workbenches


Often used in laboratories and food-processing facilities, these shelves resist corrosion. All meet NSF/ANSI 2 sanitary design standards.
For technical drawings and 3-D models, click on a part number.
Shelf | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
No. of Shelves | For Top Wd. | Dp. | Ht. | Gauge | Clearance | Cap., lbs. | Type | Mtg. Fasteners Included | Specifications Met | Assembled or Unassembled | Each | |
Stainless Steel | ||||||||||||
1 | 48" | 12" | 18" | 16 | 16 1/2" | 200 | Fixed | Yes | NSF/ANSI 2 | Unassembled | 0000000 | 0000000 |
1 | 60" | 12" | 18" | 16 | 16 1/2" | 250 | Fixed | Yes | NSF/ANSI 2 | Unassembled | 0000000 | 000000 |
1 | 72" | 12" | 18" | 16 | 16 1/2" | 300 | Fixed | Yes | NSF/ANSI 2 | Unassembled | 0000000 | 000000 |
1 | 96" | 12" | 18" | 16 | 16 1/2" | 400 | Fixed | Yes | NSF/ANSI 2 | Unassembled | 0000000 | 000000 |
2 | 48" | 12" | 30" | 16 | 16 1/2", 10 1/2" | 200 | Fixed | Yes | NSF/ANSI 2 | Unassembled | 0000000 | 000000 |
2 | 60" | 12" | 30" | 16 | 16 1/2", 10 1/2" | 250 | Fixed | Yes | NSF/ANSI 2 | Unassembled | 0000000 | 000000 |
2 | 72" | 12" | 30" | 16 | 16 1/2", 10 1/2" | 300 | Fixed | Yes | NSF/ANSI 2 | Unassembled | 0000000 | 000000 |
2 | 96" | 12" | 30" | 16 | 16 1/2", 10 1/2" | 400 | Fixed | Yes | NSF/ANSI 2 | Unassembled | 0000000 | 000000 |
Tablet Positioning Arms
Screw-on arms can bend to hold a tablet in almost any position. They have a keyed lock for added security.
For technical drawings and 3-D models, click on a part number.

For Device | Projection | Base | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Ht. | Wd. | Dp. | Display Ht. | Min. | Max. | Max. Load Capacity, lbs. | Material | Lg. | Wd. | For Max. Mounting Surface Thick. | Each | |
In/Out, Rotate, Side-to-Side, Tilt, Up/Down | ||||||||||||
9 5/8" | 8" | 3/4" | 8"-17" | 8" | 19" | 2 | Plastic | 5" | 4 1/2" | 1 13/16" | 0000000 | 0000000 |

For Device | Projection | |||||||||
---|---|---|---|---|---|---|---|---|---|---|
Ht. | Wd. | Dp. | Display Ht. | Min. | Max. | Max. Load Capacity | Material | Thread Size | Each | |
In/Out, Rotate, Side-to-Side, Tilt, Up/Down | ||||||||||
10 5/8" | 7 5/8" | 1/2" | 1"-3" | 2 1/2" | 4 1/4" | Not Rated | Plastic | 1/4"-20 | 0000000 | 0000000 |


For Device | Projection | Base | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Ht. | Wd. | Dp. | Display Ht. | Min. | Max. | Max. Load Capacity, lbs. | Material | Lg. | Wd. | No. of Mounting Holes | Mounting Hole Dia. | Mounting Fasteners Included | Lock Type | Each | |
In/Out, Rotate, Side-to-Side, Tilt, Up/Down | |||||||||||||||
9 1/4" | 6 1/4" | 3/4" | 0"-10" | 3 3/4" | 12 3/4" | 5 | Plastic | 2" | 3" | 3 | 13/64" | No | Keyed | 0000000 | 0000000 |
11 1/4" | 8 1/8" | 7/8" | 0"-10" | 3 3/4" | 12 3/4" | 5 | Powder-Coated Aluminum | 2" | 3" | 3 | 13/64" | No | Keyed | 0000000 | 000000 |
Bench-Mount Flat-Panel Monitor Positioning Arms
These arms have a VESA (Video Electronics Standards Association) standard mounting hole pattern to attach a monitor.
Threaded hole and clamp-on arms have gas springs that counterbalance monitor weight to keep the arm in position.
For technical drawings and 3-D models, click on a part number.

Base | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Monitor Size | Display Ht. | Max. Projection | Max. Load Capacity, lbs. | Material | Lg. | Wd. | No. of Mounting Holes | Mounting Hole Dia. | Mounting Fasteners Included | Attaching End Mount Type | Attaching End Mounting Hole Pattern Compatibility | Each | |
Rotate, Side-to-Side, Tilt, Up/Down | |||||||||||||
10"-32" | 8"-21 1/4" | 7 1/4" | 10 | Powder-Coated Aluminum | 3 1/2" | 3 1/2" | 4 | 5/16" | No | Plate | VESA 75 | 00000000 | 0000000 |

Projection | Load Capacity, lbs. | Base | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Monitor Size | Display Ht. | Min. | Max. | Min. | Max. | Material | Dia. | No. of Mounting Holes | Mounting Hole Dia. | For Max. Mounting Surface Thick. | Mounting Fasteners Included | Attaching End Mount Type | Attaching End Mounting Hole Pattern Compatibility | Each | |
In/Out, Rotate, Side-to-Side, Tilt, Up/Down | |||||||||||||||
10"-24" | 7"-14" | 4" | 22" | 7 | 20 | Aluminum | 4" | 1 | 1/2" | 2 1/4" | Yes | Plate | VESA 75, VESA 100 | 000000 | 0000000 |

Projection | Load Capacity, lbs. | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
For Monitor Size | Display Ht. | Min. | Max. | Min. | Max. | Material | Base Dia. | For Max. Mounting Surface Thick. | Attaching End Mount Type | Attaching End Mounting Hole Pattern Compatibility | Each | |
In/Out, Rotate, Side-to-Side, Tilt, Up/Down | ||||||||||||
10"-24" | 7"-14" | 4" | 22" | 7 | 20 | Aluminum | 4" | 3 5/8" | Plate | VESA 75, VESA 100 | 000000 | 0000000 |