McMaster-Carr logo
    Filter by
    Power Source
    Discharge Pipe Size
    Industrial Info Compare
    Intake Pipe Size
    Industrial Info Compare
    Diaphragm Material
    Discharge Tube ID
    Intake Connection Port
    Runs Dry
    Duty Cycle
    Export Control Classification Number (ECCN)
    Industrial Info Snippet
    DFARS Specialty Metals
    Discharge Connection Port
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    105 Products

    Continuous-Duty Any-Direction Constant-Flow-Rate Diaphragm Pumps for Water and Coolants

    Image of Product. Front orientation. Diaphragm Pumps. Continuous-Duty Any-Direction Constant-Flow-Rate Diaphragm Pumps for Water and Coolants.
    Rated for continuous use, this diaphragm pump is often used to move caustics such as antifreeze and salt water. Mount it in any position, even upside down. It is typically used for low-flow spraying, draining, and washdown applications. The pump is self-priming, which means it creates a suction force to draw liquid upward. Pump can run dry and does not require an initial fill, so it’s a good choice for applications without a constant flow of liquid. Do not use with solids.
    Pressure Switch—Pumps with a pressure switch automatically shut off the pump at the maximum pressure.
    Intake
    Discharge
    Overall
    Max. Flow
    Rate, gpm
    Flow Rate @
    Pressure
    Max. Pressure,
    psi
    Max. Viscosity,
    cP
    Max. Temp.,
    ° F
    Power,
    hp
    Current,
    amp
    Connection
    Gender
    For Tube
    ID
    Connection
    Gender
    For Tube
    ID
    Lg.
    Wd.
    Ht.
    Each
    120V AC, Single Phase—With Thermal Overload Protection and With Pressure Switch
     
    Plug In
    32.50 gpm @ 20 psi402501303/161.8BarbedMale1/2"BarbedMale1/2"10 7/8"5 3/8"5 5/8"00000000000000
     

    Compact Air-Powered Double Diaphragm Pumps

    Small enough to fit in the palm of your hand, these pumps transfer water, detergents, and chemicals. They have a chemical-resistant polypropylene housing. Pumps are self-priming, which means they create a suction force to draw liquid upward to fill the pump chamber. Pumps can run dry.
    Barbed Bottom Intake and Barbed Bottom Discharge
    Image of Product. Front orientation. Double Diaphragm Pumps. Compact Air-Powered Double Diaphragm Pumps, Barbed Bottom Intake and Barbed Bottom Discharge.
    Fluoroelastomer Diaphragm—Pumps with fluoroelastomer diaphragm are also suitable for use with fuel and oil.
    Max. Flow Rate, gpm
    Overall
    Max. Flow
    Rate, gpm
    @ 1 ft.
    of Head
    @ 3 ft.
    of Head
    @ 4 ft.
    of Head
    @ 5 ft.
    of Head
    Max. Viscosity,
    cP
    Air Consumption,
    ft³/min
    Air Tube
    Connection
    Intake Tube
    Connection
    Discharge Tube
    Connection
    Diaphragm
    Material
    Lg.
    Wd.
    Ht.
    Each
    15 ft. Maximum Feet of Head—100 psi Maximum Discharge Pressure
    553.72.91.87001.51/4" Barbed Male3/8" Barbed Male3/8" Barbed MaleSantoprene
    		4 9/16"1 13/16"5 13/16"00000000000000
    553.72.91.87001.751/4" Barbed Male1/2" Barbed Male1/2" Barbed MaleSantoprene
    		4 9/16"1 13/16"5 13/16"0000000000000
    553.72.91.87001.751/4" Barbed Male1/2" Barbed Male1/2" Barbed MaleFluoroelastomer
    		4 9/16"1 13/16"5 13/16"0000000000000
     

    Polypropylene Air-Powered Double Diaphragm Pumps for Chemicals

    Resistant to chemicals such as ammonia, detergents, and cleaning fluids, these pumps have a Santoprene diaphragm and polypropylene housing. They can be used to move thick sludges and slurries. Pumps are self-priming, which means they create a suction force to draw liquid upward to fill the pump chamber. All are submersible and can run dry.
    Threaded Bottom Intake and Threaded Top Discharge
    Image of Product. Front orientation. Double Diaphragm Pumps. Polypropylene Air-Powered Double Diaphragm Pumps for Chemicals, Threaded Bottom Intake and Threaded Top Discharge.
    Air Motor Pump Repair Kits—Air-motor repair kits include seals, O-rings, gaskets, retaining rings, and an air valve spool.
    Fluid Side Pump Repair Kits—Fluid-side repair kits include diaphragms, check valve balls, and seals.
    Double Diaphragm Pumps
    Air Motor Pump
    Repair Kits
    Fluid Side Pump
    Repair Kits
    Max. Flow Rate, gpm
    Overall
    Max. Flow
    Rate, gpm
    @ 40 ft.
    of Head
    @ 120 ft.
    of Head
    @ 160 ft.
    of Head
    Max. Viscosity,
    cP
    Air Consumption,
    ft³/min
    Air Connection
    Size
    Intake Size
    Discharge Size
    Lg.
    Wd.
    Ht.
    Each
    Each
    Each
    231 ft. Maximum Feet of Head—100 psi Maximum Discharge Pressure
    43.5215,00061/4 Female NPT1/4 Female NPT, 1/2 Male NPT1/4 Female NPT, 1/2 Male NPT6"7"8"00000000000000000000000000000000000000000
    14128510,000161/4 Female NPT1/2 Female NPT, 1 Male NPT1/2 Female NPT, 1 Male NPT7"10"12"000000000000000000000000000000000000000
    231913810,000201/4 Female NPT3/4 Female NPT, 1 1/2 Male NPT3/4 Female NPT, 1 1/2 Male NPT7"12"13"000000000000000000000000000000000000000000
     
    Threaded Side Intake and Threaded Side Discharge
    Image of Product. Front orientation. Double Diaphragm Pumps. Polypropylene Air-Powered Double Diaphragm Pumps for Chemicals, Threaded Side Intake and Threaded Side Discharge.
    Air Motor Pump Repair Kits—Air-motor repair kits include seals, O-rings, gaskets, retaining rings, and an air valve spool.
    Fluid Side Pump Repair Kits—Fluid-side repair kits include diaphragms, check valve balls, and seals.
    Double Diaphragm Pumps
    Air Motor Pump
    Repair Kits
    Fluid Side Pump
    Repair Kits
    Max. Flow Rate, gpm
    Overall
    Max. Flow
    Rate, gpm
    @ 40 ft.
    of Head
    @ 80 ft.
    of Head
    @ 120 ft.
    of Head
    @ 160 ft.
    of Head
    Max. Viscosity,
    cP
    Air Consumption,
    ft³/min
    Air Connection
    Size
    Intake Size
    Discharge Size
    Lg.
    Wd.
    Ht.
    Each
    Each
    Each
    231 ft. Maximum Feet of Head—100 psi Maximum Discharge Pressure
    77—543,00061/4 Female NPT3/8 Female NPT3/8 Female NPT5"8"8"000000000000000000000000000000000000000000000
     
    288 ft. Maximum Feet of Head—125 psi Maximum Discharge Pressure
    5.3—3.22.31.7Not Rated6.11/4 Female NPT1/4 Female NPT, 3/4 Male NPT1/4 Female NPT, 3/4 Male NPT7"5"7"0000000000000———0———0
     
    Flanged Bottom Intake and Flanged Top Discharge
    Image of Product. Front orientation. Double Diaphragm Pumps. Polypropylene Air-Powered Double Diaphragm Pumps for Chemicals, Flanged Bottom Intake and Flanged Top Discharge.
    Air Motor Pump Repair Kits—Air-motor repair kits include seals, O-rings, gaskets, retaining rings, and an air valve spool.
    Fluid Side Pump Repair Kits—Fluid-side repair kits include diaphragms, check valve balls, and seals.
    Double Diaphragm Pumps
    Air Motor Pump
    Repair Kits
    Fluid Side Pump
    Repair Kits
    Max. Flow Rate, gpm
    Flange
    Bolt
    Overall
    Max. Flow
    Rate, gpm
    @ 40 ft.
    of Head
    @ 120 ft.
    of Head
    @ 160 ft.
    of Head
    Max. Viscosity,
    cP
    Air Consumption,
    ft³/min
    Air Connection
    Size
    Intake
    Size
    Discharge
    Size
    OD
    Thk.
    Pressure
    Class
    Circle
    Dia.
    Hole
    Dia.
    Lg.
    Wd.
    Ht.
    Each
    Each
    Each
    231 ft. Maximum Feet of Head—100 psi Maximum Discharge Pressure
    231913810,000201/4 Female NPT1
    		1
    		4 1/4"11/16"125
    		3 1/8"5/8"7 5/8"11 13/16"15 1/8"000000000000000000000000000000000000000000000
    10083513230,000503/4 Female NPT1 1/2
    		1 1/2
    		5"13/16"125
    		3 7/8"5/8"13"23"29"000000000000000000000000000000000000000000
    160125724340,000803/4 Female NPT2
    		2
    		6"5/8"125
    		4 3/4"3/4"13"24"32"000000000000000000000000000000000000000000
     
    288 ft. Maximum Feet of Head—125 psi Maximum Discharge Pressure
    6353403520,000351/2 Female NPT1
    		1
    		4 1/4"3/4"125
    		3 1/8"9/16"12"17"21"00000000000000000000000000000000000000000
     

    PTFE Air-Powered Double Diaphragm Pumps for Harsh Chemicals

    With all PTFE wetted parts, these pumps offer the best chemical resistance of all our air-powered double diaphragm pumps and can handle solvents and petroleum-based fluids that PVDF pumps can’t. Pumps are self-priming, which means they create a suction force to draw liquid upward to fill the pump chamber. All can run dry.
    Threaded Side Intake and Threaded Side Discharge
    Image of Product. Front orientation. Double Diaphragm Pumps. PTFE Air-Powered Double Diaphragm Pumps for Harsh Chemicals, Threaded Side Intake and Threaded Side Discharge.
    Air Motor Pump Repair Kits—Air-motor repair kits include seals, O-rings, gaskets, retaining rings, and an air valve spool.
    Fluid Side Pump Repair Kits—Fluid-side repair kits include diaphragms, check valve balls, and seals.
    Double Diaphragm Pumps
    Air Motor Pump
    Repair Kits
    Fluid Side Pump
    Repair Kits
    Overall
    Max. Flow
    Rate, gpm
    Max. Solids
    Dia.
    Air Consumption,
    ft³/min
    Air Connection
    Size
    Intake Size
    Discharge
    Size
    Lg.
    Wd.
    Ht.
    Each
    Each
    Each
    231 ft. Maximum Feet of Head—100 psi Maximum Discharge Pressure
    2.50.06"4.81/8 Female NPT1/4 Female NPT1/4 Female NPT3 3/8"5 1/2"6 1/2"0000000000000000000000000000000000000000000
    6.70.08"9.31/8 Female NPT3/8 Female NPT3/8 Female NPT3 1/2"5 7/8"7 5/8"0000000000000000000000000000000000000000
    160.16"291/4 Female NPT1/2 Female NPT1/2 Female NPT6"9 3/16"8"000000000000000000000000000000000000000000
    390.24"461/4 Female NPT1 Female NPT1 Female NPT8"10 7/8"10 3/8"000000000000000000000000000000000000000000
     

    316 Stainless Steel Air-Powered Double Diaphragm Pumps for Chemicals, Fuel, and Flammable Liquids

    With a 316 stainless steel housing and a PTFE diaphragm, these pumps resist a variety of acids, alkalies, and flammable liquids such as phosphoric acid, acetone, and methyl ethyl ketone (MEK). They're designed for moving large volumes of thick sludges and slurries in demanding environments. Pumps are self-priming, which means they create a suction force to draw liquid upward to fill the pump chamber. All are submersible and can run dry.
    Threaded Bottom Intake and Threaded Top Discharge
    Image of Product. Front orientation. Double Diaphragm Pumps. 316 Stainless Steel Air-Powered Double Diaphragm Pumps for Chemicals, Fuel, and Flammable Liquids, Threaded Bottom Intake and Threaded Top Discharge.
    Air Motor Pump Repair Kits—Air-motor repair kits include seals, O-rings, gaskets, retaining rings, and an air valve spool.
    Fluid Side Pump Repair Kits—Fluid-side repair kits include diaphragms, check valve balls, and seals.
    Double Diaphragm Pumps
    Air Motor Pump
    Repair Kits
    Fluid Side Pump
    Repair Kits
    Max. Flow Rate, gpm
    Overall
    Max. Flow
    Rate, gpm
    @ 80 ft.
    of Head
    @ 120 ft.
    of Head
    @ 160 ft.
    of Head
    Max. Solids
    Dia.
    Max. Viscosity,
    cP
    Air Consumption,
    ft³/min
    Air Connection
    Size
    Intake Size
    Discharge Size
    Lg.
    Wd.
    Ht.
    Each
    Each
    Each
    289 ft. Maximum Feet of Head—125 psi Maximum Discharge Pressure
    15121071/8"10,000201/4 Female NPT1/2 Female NPT1/2 Female NPT9"10"10"000000000000000000000000000000000000000000000
    453830191/4"20,000401/2 Female NPT1 Female NPT1 Female NPT13"10"13"000000000000000000000000000000000000000000
    1067762451/4"30,000503/4 Female NPT1 1/2 Female NPT1 1/2 Female NPT15"17"22"00000000000000000000000000000000000000000000
    15010476531/4"40,0001003/4 Female NPT2 Female NPT2 Female NPT15"17"26"00000000000000000000000000000000000000000000
    235174127903/8"50,0001403/4 Female NPT3 Female NPT3 Female NPT17"20"32"000000000000000000000000000000000000000000000
     

    High-Accuracy Metering Diaphragm Pumps for Chemicals

    Image of Product. Front orientation. Diaphragm Pumps.
    These diaphragm pumps meter a consistent amount of liquid within ±2% of the maximum flow. Often used to pump water-treatment chemicals, cleaning fluids, and electropolishing solutions, they have an adjustment dial that alters flow rate in 2% increments of the maximum flow. Pumps are self-priming and create suction to draw liquid upward. They can run dry but are not for use with solids.
    Pump Repair Kits—Repair kits include a pump head assembly, a diaphragm, valves, and seals.
    Diaphragm Pumps
    Pump Repair Kits
    Replacement
    Drain Valves
    Replacement
    Flow-Adjustment Valves
    For
    Tube
    Overall
    Flow Rate,
    gal/day
    Max. Pressure,
    psi
    Max. Viscosity,
    cP
    Temp. Range,
    ° F
    Power,
    hp
    Current,
    amp
    ID
    OD
    Lg.
    Wd.
    Ht.
    Features
    Each
    Each
    Each
    Each
    120V AC, Single Phase
     
    Plug In
    0.03 to 33001,00035 to 15011/6411/4"3/8"10 7/8"5 1/2"10 3/8"Backflow-Prevention Valve, Bleed Valve, Foot Valve/Strainer0000000000000000000000000000000000000000000000000000000000
    0.05 to 52501,00035 to 15011/6411/4"3/8"10 7/8"5 1/2"10 3/8"Backflow-Prevention Valve, Bleed Valve, Foot Valve/Strainer000000000000000000000000000000000000000000000000000000
    0.12 to 122501,00035 to 15011/6411/4"3/8"11 1/4"5 1/2"10 5/8"Backflow-Prevention Valve, Bleed Valve, Foot Valve/Strainer000000000000000000000000000000000000000000000000000000
    0.22 to 221501,00035 to 15011/6411/4"3/8"11 1/4"5 1/2"10 5/8"Backflow-Prevention Valve, Bleed Valve, Foot Valve/Strainer000000000000000000000000000000000000000000000000000000
    0.24 to 241001,00035 to 15011/6411/4"3/8"10 3/4"5 1/2"10 5/8"Backflow-Prevention Valve, Bleed Valve, Foot Valve/Strainer000000000000000000000000000000000000000000000000000000
    0.42 to 421501,00035 to 15011/6411/4"3/8"11 3/4"5 1/2"10 5/8"Backflow-Prevention Valve, Bleed Valve, Foot Valve/Strainer000000000000000000000000000000———0———0
    0.44 to 441001,00035 to 15011/6411/4"3/8"11 1/4"5 1/2"10 5/8"Backflow-Prevention Valve, Bleed Valve, Foot Valve/Strainer000000000000000000000000000000———0———0
    0.94 to 941001,00035 to 15011/6413/8"1/2"11 3/4"5 1/2"11"Backflow-Prevention Valve, Bleed Valve, Foot Valve/Strainer00000000000000000000000000000000000000000000000000000000
    1.2 to 1201001,00035 to 15011/6413/8"1/2"12"6 1/4"11 3/8"Backflow-Prevention Valve, Bleed Valve, Foot Valve/Strainer00000000000000000000000000000000000000000000000000000000
    1.92 to 192501,00035 to 15011/6413/8"1/2"11 1/4"6 1/8"11 3/4"Backflow-Prevention Valve, Bleed Valve, Foot Valve/Strainer00000000000000000000000000000000000000000000000000000000
    2.4 to 240351,00035 to 15011/6413/8"1/2"12"6 1/8"11 3/4"Backflow-Prevention Valve, Bleed Valve, Foot Valve/Strainer00000000000000000000000000000000000000000000000000000000
    6 to 600301,00035 to 15011/6411/2"3/4"11 3/8"6 1/8"11"Backflow-Prevention Valve, Foot Valve/Strainer00000000000000000000000000000000000000000000———0
     
    Replacements for Diaphragm Pumps
    Each
    Replacement Foot Valve/Strainer for 1/2" Tube ID00000000000000
    Replacement Foot Valve/Strainer for 1/4" Tube ID0000000000000
    Replacement Foot Valve/Strainer for 3/8" Tube ID0000000000000
    Replacement Suction Valve for 1/2" Tube ID00000000000000
    Replacement Suction Valve for 82695K52, 82695K53, and 82695K540000000000000
    Replacement Suction Valve for 3/8" Tube ID0000000000000
    Replacement Suction Valve for 82695K93 and 82695K450000000000000

    High-Pressure Metering Diaphragm Pumps for Chemicals with Locking Lever

    Image of Product. Front orientation. Diaphragm Pumps. High-Pressure Metering Diaphragm Pumps for Chemicals with Locking Lever.
    An adjustment dial with a locking lever allows for easy flow control. These metering diaphragm pumps can be used with pressures up to four times higher than standard chemical metering diaphragm pumps. They're often used for general purpose dispensing of chemicals such as ammonia and acid-washing solutions. The adjustment dial alters flow rate in 5% increments of the maximum flow. Pumps are self-priming and create suction to draw liquid upward. Do not run dry or use with solids.
    Pump Repair Kits—Repair kits include a pump head assembly, valves, a diaphragm, and mounting hardware.
    Diaphragm Pumps
    Pump Repair Kits
    Intake
    Discharge
    Overall
    Flow Rate,
    gal/day
    Max. Pressure,
    psi
    Max. Viscosity,
    cP
    Temp. Range,
    ° F
    Power,
    hp
    Current,
    amp
    Tube
    ID
    Tube
    OD
    Tube Lg.,
    ft.
    Tube
    ID
    Tube
    OD
    Tube Lg.,
    ft.
    Lg.
    Wd.
    Ht.
    Each
    Each
    120V AC, Single Phase—Without Thermal Overload Protection
     
    Plug In
    0.3 to 310030035 to 1251/6015/16"7/16"43/8"1/2"88 7/8"7 1/4"6 3/4"0000000000000000000000000000
    0.7 to 710030035 to 1251/6015/16"7/16"43/8"1/2"88 7/8"7 1/4"6 3/4"00000000000000000000000000
    1.5 to 1510030035 to 1251/6015/16"7/16"43/8"1/2"88 7/8"7 1/4"6 3/4"00000000000000000000000000
    2.4 to 2410030035 to 1251/6015/16"7/16"43/8"1/2"88 7/8"7 1/4"6 3/4"00000000000000000000000000
    3 to 3010030035 to 1251/6015/16"7/16"43/8"1/2"88 7/8"7 1/4"6 3/4"00000000000000000000000000
    10 to 1006030035 to 1251/6015/16"7/16"43/8"1/2"88 7/8"7 1/4"6 3/4"00000000000000000000000000
     

    Smooth-Flow Air-Powered Double Diaphragm Pumps

    Also known as sprayer pumps, these provide a smooth, uniform flow for agricultural spraying, soap dispensing, and chemical transferring. They automatically turn on when you open the outlet valve. Pumps are self-priming, which means they create a suction force to draw liquid upward to fill the pump chamber. Do not run dry.
    Barbed Bottom Intake and Barbed Top Discharge
    Image of Product. Front orientation. Double Diaphragm Pumps. Smooth-Flow Air-Powered Double Diaphragm Pumps, Barbed Bottom Intake and Barbed Top Discharge.
    Santoprene Diaphragm—Santoprene diaphragm stands up to ammonia and resists cracking for a long service life.
    Fluoroelastomer Diaphragm—Fluoroelastomer diaphragm is compatible with many etching and cleaning solutions that have a low concentration of nitric acid.
    Air Motor Pump Repair Kits—Air-motor repair kits include seals, O-rings, gaskets, retaining rings, and an air valve spool.
    Double Diaphragm Pumps
    Air Motor Pump
    Repair Kits
    Max. Flow
    Rate, gpm
    Overall
    Max. Flow
    Rate, gpm
    @ 80 ft.
    of Head
    @ 120 ft.
    of Head
    Max. Viscosity,
    cP
    Air Consumption,
    ft³/min
    Air Tube
    Connection
    Intake Tube
    Connection
    Discharge Tube
    Connection
    Diaphragm
    Material
    Lg.
    Wd.
    Ht.
    Each
    Each
    135 ft. Maximum Feet of Head—58 psi Maximum Discharge Pressure
    0.60.50.42,5000.481/4" Barbed Male3/8" Barbed Male3/8" Barbed MaleSantoprene
    		4"6"6"000000000000000000000000000
    0.60.50.42,5000.481/4" Barbed Male3/8" Barbed Male3/8" Barbed MaleFluoroelastomer
    		4"6"6"0000000000000000000000000
     

    316 Stainless Steel Air-Powered Double Diaphragm Pumps for Oil, Chemicals, Fuel, and Large Solids

    With a 316 stainless steel housing and a fluoroelastomer diaphragm, these pumps resist a variety of harsh acids and alkalies, such as phosphoric acid, nitric acid, and sulfuric acid. They have large internal pathways and check valves with flaps to accommodate thick sewage, abrasive slurries, and industrial waste with large solids that would damage standard air-powered double diaphragm pumps. All are self-priming, which means they create a suction force to draw liquid upward to fill the pump chamber. Pumps are submersible and can run dry.
    Threaded Top Intake and Threaded Bottom Discharge
    Image of Product. Front orientation. Double Diaphragm Pumps. 316 Stainless Steel Air-Powered Double Diaphragm Pumps for Oil, Chemicals, Fuel, and Large Solids, Threaded Top Intake and Threaded Bottom Discharge.
    Air Motor Pump Repair Kits—Air-motor repair kits include seals, O-rings, gaskets, retaining rings, and an air valve spool.
    Fluid Side Pump Repair Kits—Fluid-side repair kits include diaphragms, check valve balls, and seals.
    Double Diaphragm Pumps
    Air Motor Pump
    Repair Kits
    Fluid Side Pump
    Repair Kits
    Max. Flow Rate, gpm
    Overall
    Max. Flow
    Rate, gpm
    @ 80 ft.
    of Head
    @ 120 ft.
    of Head
    @ 160 ft.
    of Head
    Max. Solids
    Dia.
    Max.
    Viscosity
    Air Consumption,
    ft³/min
    Air Connection
    Size
    Intake Size
    Discharge
    Size
    Lg.
    Wd.
    Ht.
    Each
    Each
    Each
    289 ft. Maximum Feet of Head—125 psi Maximum Discharge Pressure
    704735201"Not Rated501/2 Female NPT1 Female NPT1 Female NPT11"17"16"0000000000000000000000000000000000000000000000
     

    Miniature Metering Diaphragm Pumps for Chemicals

    Image of Product. Front orientation. Diaphragm Pumps. Miniature Metering Diaphragm Pumps for Chemicals.
    With a footprint that's only a few inches in any direction, these diaphragm pumps fit into compact systems to dispense small amounts of acids, cleaning fluids, and other chemicals. They're often used in sterilization, photochemical, and water treatment systems. Choose from pumps with either a 4-20mA or 1-5V DC input signal that controls the flow rate.
    Note: Pumps must be filled with liquid before use. They need a constant flow of liquid and cannot run dry.
    External
    Intake
    Discharge
    Overall
    Flow Rate,
    gal/day
    Max. Pressure,
    psi
    Max. Viscosity,
    cP
    Temp. Range,
    ° F
    Current,
    amp
    Signal,
    mA
    Voltage,
    V DC
    Gender
    For Tube
    ID
    Gender
    For Tube
    ID
    For Tube
    OD
    Lg.
    Wd.
    Ht.
    Each
    12V DC—With Thermal Overload Protection
     
    Hardwire
    1429630 to 1001.5—1 to 5Female1/8"Female1/8"1/4"4"2 1/2"3 5/8"0000000000000
    1429630 to 1001.54 to 20—Female1/8"Female1/8"1/4"4"2 1/2"3 5/8"000000000000
     
    24V DC—With Thermal Overload Protection
     
    Hardwire
    1429630 to 1001—1 to 5Female1/8"Female1/8"1/4"4"2 1/2"3 5/8"000000000000
    1429630 to 10014 to 20—Female1/8"Female1/8"1/4"4"2 1/2"3 5/8"000000000000
     

    Aluminum Air-Powered Double Diaphragm Pumps for Oil, Chemicals, and Fuel

    These pumps have a PTFE diaphragm compatible with oil, fuel, and chemicals such as mineral spirits, methyl ethyl ketone (MEK), and xylene. They have a rugged aluminum housing for moving large volumes of thick sludges and slurries in demanding environments. Pumps are self-priming, which means they create a suction force to draw liquid upward to fill the pump chamber. All are submersible and can run dry.
    Threaded Bottom Intake and Threaded Top Discharge
    Image of Product. Front orientation. Double Diaphragm Pumps. Aluminum Air-Powered Double Diaphragm Pumps for Oil, Chemicals, and Fuel, Threaded Bottom Intake and Threaded Top Discharge.
    Air Motor Pump Repair Kits—Air-motor repair kits include seals, O-rings, gaskets, retaining rings, and an air valve spool.
    Fluid Side Pump Repair Kits—Fluid-side repair kits include diaphragms, check valve balls, and seals.
    Double Diaphragm Pumps
    Air Motor Pump
    Repair Kits
    Fluid Side Pump
    Repair Kits
    Max. Flow Rate, gpm
    Overall
    Max. Flow
    Rate, gpm
    @ 80 ft.
    of Head
    @ 120 ft.
    of Head
    @ 160 ft.
    of Head
    Max. Solids
    Dia.
    Max. Viscosity,
    cP
    Air Consumption,
    ft³/min
    Air Connection
    Size
    Intake Size
    Discharge Size
    Lg.
    Wd.
    Ht.
    Each
    Each
    Each
    289 ft. Maximum Feet of Head—125 psi Maximum Discharge Pressure
    15121071/8"10,000201/4 Female NPT1/2 Female NPT, 1/2 Female NPT1/2 Female NPT, 1/2 Female NPT9"10"12"00000000000000000000000000000000000000000000
    453830191/4"20,000401/2 Female NPT1 Female NPT1 Female NPT13"10"13"00000000000000000000000000000000000000000
    1067762451/4"30,000503/4 Female NPT1 1/2 Female NPT1 1/2 Female NPT15"17"22"0000000000000000000000000000000000000000000
    15010476531/4"40,0001003/4 Female NPT2 Female NPT2 Female NPT15"17"26"0000000000000000000000000000000000000000000
    235174127903/8"50,0001403/4 Female NPT3 Female NPT3 Female NPT17"20"32"0000000000000000000000000000000000000000000
     
    back to top