Mount these diaphragm pumps in any position, even upside down. Pumps have a fractional horsepower motor rated for intermittent use (return to room temperature before restarting). They are for use in low-flow spraying, draining, and washdown applications. They are self-priming, which means they create a suction force to draw liquid upward. Pumps can run dry and do not require an initial fill, so they’re a good choice for applications without a constant flow of liquid. Do not use with solids.

With a footprint that's only a few inches in any direction, these diaphragm pumps fit into compact systems to dispense small amounts of acids, cleaning fluids, and other chemicals. They're often used in sterilization, photochemical, and water treatment systems. Choose from pumps with either a 4-20mA or 1-5V DC input signal that controls the flow rate.

Note: Pumps must be filled with liquid before use. They need a constant flow of liquid and cannot run dry.

Automatically control output from a distance using 4-20 mA or external-pulse signals. View the flow rate on the backlit LCD. These diaphragm pumps meter a consistent amount of liquid within ±2% of the maximum flow. Often used to pump water-treatment chemicals, cleaning fluids, and electropolishing solutions, they have an adjustment dial that alters flow rate in 2% increments of the maximum flow. Pumps can run dry. Do not use with solids.

Pump Repair Kits—Repair kits include a pump head assembly, a diaphragm, valves, and seals.

Use these diaphragm pumps for high-pressure output of antifreeze, hydraulic oil, and motor oil. They have an internal relief valve to prevent pressure buildup. The adjustment dial alters flow rate in 1% increments of the maximum flow. Pumps have a totally enclosed fan-cooled (TEFC) motor for use in dusty, dirty, and damp environments. Do not run dry or use with solids.

A 316 stainless steel housing provides corrosion resistance for a long life in harsh environments. These diaphragm pumps meter a consistent amount of liquid within ±2% of the maximum flow. Often used to pump water-treatment chemicals, they have an adjustment dial that alters flow rate in 2% increments of the maximum flow. Pumps are self-priming and create suction to draw liquid upward. They can run dry. Do not use with solids.

Pump Repair Kits—Repair kits include a pump head assembly, a diaphragm, valves, and seals.

An adjustment dial with a locking lever allows for easy flow control. These metering diaphragm pumps can be used with pressures up to four times higher than standard chemical metering diaphragm pumps. They're often used for general purpose dispensing of chemicals such as ammonia and acid-washing solutions. The adjustment dial alters flow rate in 5% increments of the maximum flow. Pumps are self-priming and create suction to draw liquid upward. Do not run dry or use with solids.

Pump Repair Kits—Repair kits include a pump head assembly, valves, a diaphragm, and mounting hardware.

These diaphragm pumps meter a consistent amount of liquid within ±2% of the maximum flow. Often used to pump water-treatment chemicals, cleaning fluids, and electropolishing solutions, they have an adjustment dial that alters flow rate in 2% increments of the maximum flow. Pumps are self-priming and create suction to draw liquid upward. They can run dry but are not for use with solids.

Pump Repair Kits—Repair kits include a pump head assembly, a diaphragm, valves, and seals.