McMaster-Carr logo
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    46 Products

    Die Wrenches

    Also known as die stocks, these wrenches grip round or hex-shaped dies so you can turn them by hand. All include at least one set screw for securing the die.
    For Round Dies
    Image of Product. Front orientation. Die Wrenches. For Round Dies.
    For Die
    OD
    Lg.
    Handle
    Material
    Die Holder
    Material
    Includes
    Each
    13/16"7"SteelCast SteelThree Set Screws25565A1900000
    1"8"SteelCast SteelThree Set Screws25565A210000
    1 1/2"12 1/2"SteelCast SteelThree Set Screws25565A2200000
    2"15"SteelCast SteelThree Set Screws25565A2500000
    2 1/2"20"SteelCast SteelThree Set Screws25565A2600000
    3"22"SteelCast SteelThree Set Screws25565A2700000
    4"29"SteelSteelThree Set Screws25565A28000000
    5"33"SteelSteelThree Set Screws25565A29000000
    For Hex Dies
    Image of Product. Front orientation. Die Wrenches. For Hex Dies.
    Image of Attribute. Front orientation. Contains Annotated.
    For Die
    Wd.
    Lg.
    Handle
    Material
    Die Holder
    Material
    Includes
    Each
    5/8"4 7/8"Cast Zinc AlloyCast Zinc AlloyOne Set Screw8325A2100000
    1 7/16"14 11/16"Aluminum
    		Cast Zinc AlloyOne Set Screw8325A2300000
    1 13/16"22 1/2"Aluminum
    		Cast Zinc AlloyOne Set Screw8325A2400000
    For Hex and Round Dies
    Image of Product. Front orientation. Die Wrenches. For Hex and Round Dies.
    Image of Attribute. Front orientation. Contains Annotated.
    For Die
    Wd.
    For Die
    OD
    Lg.
    Handle
    Material
    Die Holder
    Material
    Includes
    Each
    1"1"10"Cast Zinc AlloyCast Zinc AlloyOne Set Screw8325A22000000

    Round-Shank Die Holders

    Image of System. Front orientation. Exploded view. Contains Annotated. Die Holders. Round-Shank Die Holders.
    Image of Product. Front orientation. Die Holders. Round-Shank Die Holders.
    Install one of these holders into a straight machine spindle to drive a round die. Set screws secure the die in the holder.
    For Die
    OD
    Shank
    Dia.
    Material
    Includes
    Each
    13/16"1/2"SteelTwo Set Screws8326A12000000
    1"1/2"SteelTwo Set Screws8326A1100000
    1 1/2"3/4"SteelThree Set Screws8326A1300000

    Compensating Tap and Die Holders for Lathes

    Image of System. Shown with Die (Not Included). Front orientation. Exploded view. Contains Annotated. Lathe Tap and Die Holders. Compensating Tap and Die Holders for Lathes.
    Image of System. Shown with Tap (Not Included). Front orientation. Exploded view. Contains Annotated. Lathe Tap and Die Holders. Compensating Tap and Die Holders for Lathes.

    Shown with Die (Not Included)

    Shown with Tap (Not Included)

    Image of ProductInUse. Shown Assembled in Tailstock (Not Included). Front orientation. Contains Annotated. Lathe Tap and Die Holders. Compensating Tap and Die Holders for Lathes.

    Shown Assembled in Tailstock (Not Included)

    Cut accurate threads using any lathe with a Morse taper tailstock. These two-part tools consist of a holder that grips either a square-shank tap or a round die and a shank that mounts to your tailstock. The holder slides freely along a slot on the shank—also called floating—to reduce stress from driving the tap or die against your workpiece.
    Tap Holder and Shank Kits
    Image of Product. Shown with Tap (Not Included). Front orientation. Lathe Tap and Die Holders. Compensating Tap and Die Holders for Lathes, Tap Holder and Shank Kits.

    Shown with Tap (Not

    Included)

    Kits come with a complete tool for cutting either internal or external threads. Taps or dies are not included.
    For Tap
    Size
    Machine
    Taper No.
    Inch
    Metric
    For Tap Pipe
    Size
    For Shank
    Dia.
    For Square
    Shank Size
    Max. Thread
    Lg.
    Material
    Each
    Morse 2No. 0 to 1/4"M1.6 to M6—5/32" to 1/4"0.188" to 0.313"2.375"Steel29265A110000000
    Morse 31/4" to 1/2"M7 to M121/16, 1/8
    		1/4" to 5/16"0.313" to 0.438"2.875"Steel29265A12000000
    Morse 31/2" to 3/4"M14 to M181/8, 1/4
    		5/16" to 1/2"0.438" to 0.689"2.875"Steel29265A13000000
    Morse 41/4" to 1/2"M7 to M121/16, 1/8
    		1/4" to 5/16"0.313" to 0.438"2.875"Steel29265A14000000
    Morse 41/2" to 3/4"M14 to M181/8, 1/4
    		5/16" to 1/2"0.438" to 0.689"2.875"Steel29265A15000000
    Die Holder and Shank Kits
    Image of Product. Shown with Die (Not Included). Front orientation. Lathe Tap and Die Holders. Compensating Tap and Die Holders for Lathes, Die Holder and Shank Kits.

    Shown with Die (Not

    Included)

    Kits come with a complete tool for cutting either internal or external threads. Taps or dies are not included.
    Machine
    Taper No.
    For Die
    OD
    Max. Thread
    Lg.
    Material
    Includes
    Each
    Morse 21"2.375"SteelThree Set Screws29265A160000000
    Morse 31"2.875"SteelThree Set Screws29265A17000000
    Morse 31 1/2"2.875"SteelThree Set Screws29265A18000000
    Morse 32"2.875"SteelThree Set Screws29265A19000000
    Morse 41"2.875"SteelThree Set Screws29265A21000000
    Morse 41 1/2"2.875"SteelThree Set Screws29265A22000000
    Morse 42"2.875"SteelThree Set Screws29265A23000000
    Tap Holders
    Image of Product. Shown with Tap (Not Included). Front orientation. Lathe Tap and Die Holders. Compensating Tap and Die Holders for Lathes, Tap Holders.

    Shown with Tap (Not

    Included)

    Add holders to switch to a cutting tool in a different size or type.
    For Tap
    Size
    For Machine
    Taper No.
    Inch
    Metric
    For Tap Pipe
    Size
    For Shank
    Dia.
    For Square
    Shank Size
    Max. Thread
    Lg.
    Material
    Each
    Morse 2No. 0 to 1/4"M1.6 to M6—5/32" to 1/4"0.188" to 0.313"2.375"Steel29265A240000000
    Morse 3, Morse 41/4" to 1/2"M7 to M121/16, 1/8
    		1/4" to 5/16"0.313" to 0.438"2.875"Steel29265A25000000
    Morse 3, Morse 41/2" to 3/4"M14 to M181/8, 1/4
    		5/16" to 1/2"0.438" to 0.689"2.875"Steel29265A26000000
    Die Holders
    Image of Product. Shown with Die (Not Included). Front orientation. Lathe Tap and Die Holders. Compensating Tap and Die Holders for Lathes, Die Holders.

    Shown with

    Die (Not

    Included)

    Add holders to switch to a cutting tool in a different size or type.
    For Machine
    Taper No.
    For Die
    OD
    Max. Thread
    Lg.
    Material
    Includes
    Each
    Morse 21"2.375"SteelThree Set Screws29265A51000000
    Morse 3, Morse 41"2.875"SteelThree Set Screws29265A5200000
    Morse 3, Morse 41 1/2"2.875"SteelThree Set Screws29265A5300000
    Morse 3, Morse 42"2.875"SteelThree Set Screws29265A5400000
    Shanks
    Image of Product. Front orientation. Lathe Tap and Die Holders. Compensating Tap and Die Holders for Lathes, Shanks.
    Shanks are compatible with any holder, as long as they have the same Morse taper number.
    Machine
    Taper No.
    Material
    Each
    Morse 2Steel29265A56000000
    Morse 3Steel29265A5700000
    Morse 4Steel29265A58000000

    Round to Hex Die Adapters

    Image of Product. Front orientation. Die Adapters.
    Convert round dies to hex dies for use with a conventional wrench. An included set screw secures the die.
    For Die
    OD
    Wd.
    Material
    Includes
    Each
    13/16"1 1/16"SteelOne Set Screw25545A21000000
    1"1 1/4"SteelOne Set Screw25545A2200000
    1 1/2"1 31/32"SteelOne Set Screw25545A2300000
    2"2 9/16"SteelOne Set Screw25545A2400000
    2 1/2"3"SteelOne Set Screw25545A2500000

    Tap and Die Wrench Sets

    Image of Product. Front orientation. Tap and Die Wrench Sets.
    Switch from internal to external threading with interchangeable tap and die adapters. Use them with the included ratcheting wrench. The attachable sliding T-handle moves from side to side for accessing tight spaces.
    No. of
    Pieces
    Includes
    Tap Sizes Included
    Die Sizes Included
    Container
    Type
    Each
    5Tap Adapter for Tap Sizes No. 4 to No. 12
    Tap Adapter for Tap Sizes 1/4" to 1/2"
    Die Adapter for 1" Wide Hex Dies
    Ratcheting Wrench with Attachable Sliding T-Handle    		——Plastic Case8340A21000000
    42Die Spacer Adapter
    Metric Feeler Gauge
    17 Taps
    17 Dies
    4 mm Hex L-Key
    Tap Adapter for Tap Sizes No. 4 to No. 12
    Tap Adapter for Tap Sizes 1/4" to 1/2"
    Die Adapter for 1" Wide Hex Dies
    Ratcheting Wrench with Attachable Sliding T-Handle    		1/8"-28, M3 × 0.50 mm, M3 × 0.60 mm, M4 × 0.70 mm, M4 × 0.75 mm, M5 × 0.80 mm, M5 × 0.90 mm, M6 × 1.00 mm, M7 × 1.00 mm, M8 × 1.25 mm, M9 × 1.00 mm, M9 × 1.25 mm, M10 × 1.25 mm, M10 × 1.50 mm, M11 × 1.50 mm, M12 × 1.50 mm, M12 × 1.75 mm1/8"-28, M3 × 0.50 mm, M3 × 0.60 mm, M4 × 0.70 mm, M4 × 0.75 mm, M5 × 0.80 mm, M5 × 0.90 mm, M6 × 1.00 mm, M7 × 1.00 mm, M8 × 1.25 mm, M9 × 1.00 mm, M9 × 1.25 mm, M10 × 1.25 mm, M10 × 1.50 mm, M11 × 1.50 mm, M12 × 1.50 mm, M12 × 1.75 mmPlastic Case8340A23000000
    77Die Spacer Adapter
    Metric Feeler Gauge
    34 Taps
    34 Dies
    4 mm Hex L-Key
    Inch Feeler Gauge
    Tap Adapter for Tap Sizes No. 4 to No. 12
    Tap Adapter for Tap Sizes 1/4" to 1/2"
    Die Adapter for 1" Wide Hex Dies
    Ratcheting Wrench with Attachable Sliding T-Handle    		4-40, 6-32, 8-32, 10-24, 10-32, 12-24, 1/8"-27, 1/8"-28, 1/4"-20, 1/4"-28, 5/16"-18, 5/16"-24, 3/8"-16, 3/8"-24, 7/16"-14, 7/16"-20, 1/2"-13, 1/2"-20, M3 × 0.5 mm, M3 × 0.60 mm, M4 × 0.70 mm, M4 × 0.75 mm, M5 × 0.80 mm, M5 × 0.90 mm, M6 × 1.00 mm, M7 × 1.0 mm, M8 × 1.25 mm, M9 × 1.00 mm, M9 × 1.25 mm, M10 × 1.25 mm, M10 × 1.50 mm, M11 × 1.50 mm, M12 × 1.50 mm, M12 × 1.75 mm4-40, 6-32, 8-32, 10-24, 10-32, 12-24, 1/8"-27, 1/8"-28, 1/4"-20, 1/4"-28, 5/16"-18, 5/16"-24, 3/8"-16, 3/8"-24, 7/16"-14, 7/16"-20, 1/2"-13, 1/2"-20, M3 × 0.50 mm, M3 × 0.60 mm, M4 × 0.70 mm, M4 × 0.75 mm, M5 × 0.80 mm, M5 × 0.90 mm, M6 × 1.00 mm, M7 × 1.00 mm, M8 × 1.25 mm, M9 × 1.00 mm, M9 × 1.25 mm, M10 × 1.25 mm, M10 × 1.50 mm, M11 × 1.50 mm, M12 × 1.50 mm, M12 × 1.75 mmPlastic Case8340A24000000
    1145 Extractors
    Metric Feeler Gauge
    48 Taps
    48 Dies
    4 mm Hex L-Key
    Inch Feeler Gauge
    Tap Adapter for Tap Sizes No. 4 to No. 12
    Tap Adapter for Tap Sizes 1/4" to 1/2"
    Locking Tap Adapter for Tap Sizes 9/16" to 3/4"
    Die Adapter for 1" Wide Hex Dies
    Die Adapter for 1 7/16" Wide Hex Dies
    3/8 Drive Female Extension Adapter
    3/8 Drive Male Extension Adapter
    (2) Ratcheting Wrench with Attachable Sliding T-Handle    		4-40, 6-32, 8-32, 10-24, 10-32, 12-24, 1/8"-27, 1/8"-28, 1/4"-18, 1/4"-19, 1/4"-20, 1/4"-28, 5/16"-18, 5/16"-24, 3/8"-16, 3/8"-24, 7/16"-14, 7/16"-20, 1/2"-13, 1/2"-20, 9/16"-12, 9/16"-18, 5/8"-11, 5/8"-18, 3/4"-10, 3/4"-16, M3 × 0.5 mm, M3 × 0.60 mm, M4 × 0.70 mm, M4 × 0.75 mm, M5 × 0.80 mm, M5 × 0.90 mm, M6 × 1.00 mm, M7 × 1.0 mm, M8 × 1.25 mm, M9 × 1.00 mm, M9 × 1.25 mm, M10 × 1.25 mm, M10 × 1.50 mm, M11 × 1.50 mm, M12 × 1.50 mm, M12 × 1.75 mm, M14 × 1.25 mm, M14 × 2.00 mm, M16 × 1.50 mm, M16 × 2.00 mm, M18 × 1.50 mm, M18 × 2.50 mm4-40, 6-32, 8-32, 10-24, 10-32, 12-24, 1/8"-27, 1/8"-28, 1/4"-18, 1/4"-19, 1/4"-20, 1/4"-28, 5/16"-18, 5/16"-24, 3/8"-16, 3/8"-24, 7/16"-14, 7/16"-20, 1/2"-13, 1/2"-20, 9/16"-12, 9/16"-18, 5/8"-11, 5/8"-18, 3/4"-10, 3/4"-16, M3 × 0.50 mm, M3 × 0.60 mm, M4 × 0.70 mm, M4 × 0.75 mm, M5 × 0.80 mm, M5 × 0.90 mm, M6 × 1.00 mm, M7 × 1.00 mm, M8 × 1.25 mm, M9 × 1.00 mm, M9 × 1.25 mm, M10 × 1.25 mm, M10 × 1.50 mm, M11 × 1.50 mm, M12 × 1.50 mm, M12 × 1.75 mm, M14 × 1.25 mm, M14 × 2.00 mm, M16 × 1.50 mm, M16 × 2.00 mm, M18 × 1.50 mm, M18 × 2.50 mmPlastic Case8340A22000000
    back to top