Cut left-hand external threads on bolts, studs, and rods.

The teeth on these high-speed steel dies are designed to cut through stainless steel.

Use these dies with Ridgid pipe and conduit threader die heads on Ridgid pipe and conduit threaders.

Each set includes a ratchet with handle, die heads, and dies. Use them to cut NPT threads in steel pipe and conduit by hand.

Add or replace parts such as drive adapters, die sets, and drive bars for the Ridgid Large Size Pipe and Conduit Threader Adapter.

These machines thread faster than the Ridgid 300 and include a self-lubricating die head and automatic chuck.

Carry this pipe and conduit threader to your work site.

Create external pipe and conduit threads.

A smaller width than standard hex dies lets you repair threads in tight spaces.

Clamp these dies around your workpiece, so you can start thread repair anywhere along the length of a bolt, stud, or rod. They're hex shaped for use with conventional wrenches.

Renew rusted and damaged pipe and conduit threads.

Clean and restore the fine threads on power transmission shafts that are used with bearing locknuts. Dies are sized according to the American Bearing Manufacturer's Association (ABMA).

Slide over the end of threaded rod, pipe, and conduit to the area where threads are damaged, then tighten and rotate to repair threads.

Multiple files and handles are included in these sets.

Use these wrenches to turn hex-shaped dies by hand. They're also known as die stocks.

Cut and repair threads and drill holes in many different sizes. Tap and die wrenches are included.

Switch from internal to external threading with interchangeable tap and die adapters. Use them with the included ratcheting wrench.

Renew external threads in a wide range of sizes. The dies in these sets have a narrower width than standard dies, making them a good choice for thread repair in tight spots.

Cut several sizes of external screw threads.

Repair rusted and damaged threads in pipe and conduit. These files are for use in most hole diameters.

With replaceable dies, these long-lasting tools can repair both screw threads and pipe and conduit threads. Use them for holes with an ID from 3/4" to 6".

Hot-rolled steel press plates and hardened steel bushings give these die sets the strength to handle punching and metal forming applications.

Also known as 40‐ton metalworkers, these hydraulic machines handle a variety of forming tasks including pressing, punching, notching, and shearing.

Insert a holder into the Morse taper tailstock on a lathe to drive a round die.

These steel stamps are strong enough to make marks on surfaces with a Rockwell hardness up to C50, including stainless steel and heat-treated steel.

Made from 440C stainless steel, these stamps won't rust and flake with exposure to moisture and chemicals. They're strong enough to make marks on surfaces with a Rockwell hardness up to C50, including other stainless steels and heat-treated steel.

Make marks on surfaces with a Rockwell hardness up to C50, including stainless steel and heat-treated steel.

Create raised lettering similar to a license plate with these reverse-face stamps. Impressions are made on the backside of metals for an embossed character on the front.

These steel stamps are strong enough to make marks on surfaces with a Rockwell hardness up to C50, including stainless steel and heat-treated steel.

The thick shank provides more control for more consistent marks than our standard metal stamps. Make marks on surfaces with a Rockwell hardness up to C30, including leather, wood, and most metals. Stamps are steel.

Create raised lettering similar to a license plate with these reverse-face stamps. Impressions are made on the backside of metals for an embossed character on the front.

Make marks on surfaces with a Rockwell hardness up to C50, including stainless steel and heat-treated steel.

These stamps have a solid face.

Less than 2" wide, these stampes let you choose only the characters you need from 0-9, A-Z, and blank spaces.

These stamps provide an entire number set in the convenience of one handheld stamp. Rotate the wheel to change the character.

Mark keys with common messages such as "Do Not Copy" and "Master".

These punches set grommets that have an extended-neck tooth lock washer.

Install standard and dual-sided fabric snaps with one push of the handle.

Kits include a hand punch tool with die and six complete snaps.

Combine the utility of a thread-cutting die with a flange nut. These nuts repair damaged threads and cut through rust, residue, and weld spatter as you thread them while the flange distributes pressure on the material surface, eliminating the need for a separate washer.

Create larger holes and make repeated punches with these drivers that supply 11 tons of force to the included hole punches.

Punch conduit up to size 1 1/4.

Create holes for installing heavy duty industrial connectors. When the die and punch are pressed together, four centering mandrels in the die mark where to drill holes for the connector's assembly.

These steel punches cut through aluminum and steel fast to make openings for DB connectors.

A throat depth more than double those of standard bench-mount lever-operated punches allows this tool to reach further past the edge of material.

These medium duty tools have more than double the punching force of compact portable lever-operated punches.

These punches are half the size of standard portable lever-operated punches. They come with punches and dies in varying sizes.

Turn your portable drill into a punch cutter for cutting curved and straight shapes in flat and corrugated sheet metal and plastic.

The bendable shaft with handpiece lets these grinders operate smoothly with less vibration, noise, and heat than other hand-held grinders.

Kits include a light duty grinder and a variety of tools for intermittent grinding on most metals.

More durable than our Light Duty Grinders, these are designed for more frequent use.

Kit includes a light duty grinder and an assortment of tools for occasional grinding, deburring, and finishing.

More durable than our Light Duty Grinders, these are designed for more frequent use.