Connect these dispensing stations to your bulk oil container to easily fill hand-held dispensers.

Measure oil as it's dispensed.

Equipped with a flowmeter/totalizer, this dispenser displays both the flow rate and the cumulative flow volume of the oil dispensed.

These dispensers have an opening for filling without removing the nozzle.

Deliver a mist of oil using shop air.

Pull the trigger on these oilers for easier one-hand operation than standard hand-held oil dispensers.

Serve multiple lubrication points from a single location.

A sealed design prevents contamination in dirty and dusty environments.

Customize these dispensers to serve up to 24 lubrication points from a single location.

Use this dispenser to brush oil on chain, gears, and conveyors. Often used to replenish lubricant after washdowns.

Flip the lever to start and stop flow.

Penetrate gaskets, sealed bearings, and joints to deliver grease to precise locations.

Slide the metal sleeve up to the tip for rigidity. Slide it back down to expose the flexible nozzle.

Penetrate gaskets, sealed bearings, and joints to deliver grease to precise locations.

These flexible nozzles have threads on both ends for connecting a grease gun to a dispensing tip.

Penetrate gaskets, sealed bearings, and joints to deliver grease to precise locations.

Convert dispensing tips with male threads into quick-disconnect couplings.

These flexible extensions have a quick-disconnect fitting that snaps into your dispensing tip, so you can lubricate grease fittings that are hard to reach.

Dispensing more grease per pump than pistol-grip guns, lever-grip guns are better for applications that require high grease output.

These guns deliver twice as much grease per stroke than standard lever-grip guns.

Dispense grease with the highest-pressure-rated gun we offer.

Designed to lubricate linear motion components, such as slide bearings, guides, and ball screws, these guns work exclusively with THK grease cartridges and fittings.

Be sure you’re using the right grease—this gun has a clear barrel for identification at a glance.

Turn a small tube of grease into a dispenser.

Because of their one-hand operation, pistol-grip grease guns are easier to use for adding grease to hard-to-reach places than lever-grip guns.

More portable than air-powered options, these guns operate on a rechargeable battery.

Connect these guns to container-mount dispensers for controlled dispensing.

Move grease-dispensing guns in any direction without kinking the outlet hose.

Kits contain lengths of hose, nozzles, valves, and caps.

Build a custom 3/4" system to deliver coolant, cutting oil, water, or air in any direction.

Kit contains lengths of hose, nozzles, connectors, and assembly pliers.

Use with Loc-Line hose to assemble and disassemble components.

These dispensers have a reservoir for recirculating coolant.

Press the lever to stop coolant mist and start a high-velocity air stream to remove dust and shavings.

Replace messy mist coolant dispensers—these convert compressed air into a stream of cold air. They can be used in applications where liquid coolant can't.

For use in the highest pressure coolant lines, these nozzles are rated for at least 1,000 psi.

For high-pressure coolant lines, these nozzles withstand pressure up to 500 psi.

Nozzles allow you to control the flow while dispensing hydraulic fluid.

These nozzles let you adjust the flow while dispensing gasoline. They are also known as service-station-style nozzles.

Connect these swivels to the threaded end of your dispensing hose. They rotate before and after installation as needed to prevent hose from twisting, kinking, and wearing prematurely.

Attach these chucks to your air hose so you can connect the hose to Schrader valves.

Attach these nozzles to a cartridge for controlled dispensing.

Thanks to the nickel-plated brass base on these needles, they can be cleaned, washed, boiled, or sterilized.

Connect these needles to adhesive cartridges, grease guns, and other dispensers with a threaded connection.

Dispense fluid from syringes and other small instruments with luer lock connections.

Add a straw to an aerosol can for precise applications or replace a lost or clogged straw.

Choose from a variety of containers, lids, and accessories to design a dispenser that will pour or pump contents without allowing contaminants inside. These dispensers are often used with oil and other lubricating fluids.

Achieve the perfect bead every time.

A lever handle maximizes output with each stroke for low-effort dispensing.

Designed to move low volumes of caustic liquids in confined areas, these pumps have a thin intake tube and a small handle.

Rotate the handle to dispense a continuous flow of liquid.

Extract water from valve boxes, meter pits, and other small spaces.

Rotate the handle to dispense a continuous flow of liquid.

A lever handle delivers fluid on both the forward and backward strokes for faster dispensing than other drum pumps.

Made with polypropylene components, these pumps withstand highly corrosive diesel exhaust fluid while preventing it from crystallizing.

A nozzle and hose allow you to dispense directly into your container. The lever handle maximizes output with each stroke for low-effort dispensing. The handle delivers fluid on both the forward and backward strokes to quickly move drum contents.

Use these pumps in food and beverage applications.

Rotate the handle to dispense a continuous flow of liquid.

These pumps are C-UL listed for use in environments with flammable gases and combustible dust. Operating on a 12-volt battery, use them to transfer and drain fuel such as gasoline, diesel fuel, and kerosene.

A nozzle and hose allow you to dispense directly into your container. For on-site diesel fuel dispensing at construction sites, on boats, and in other environments without electrical hookups, attach these portable pumps to any 12-volt battery.

Including nozzles and connectors, these pumps come with everything you need to start pumping.

Made of PVDF components, these pumps resist harsh chemicals such as hydrochloric acid and sulfuric acid. They have a foot pedal for hands-free operation.

Since these pumps move liquid by pressurizing your drum, they have few moving parts prone to wear and tear.

These faucets meet NSF/ANSI standards.

All of these faucets are primarily used on drums, but can also be used on tanks, carboys, and other containers.

Use these faucets with fluids at least as thick as motor oil.