Draw attention to important signs—these holders have a bright border. Insert a sign from the top, bottom, and sides.

Lock the frame to protect signs from tampering. These holders are steel with a scratch- and shatter-resistant acrylic cover, so they will stand up to tough environments will still being optically clear. Insert a sign from the side. Mount them to a wall using the included fasteners. Holders can also be mounted to a pole. Use the mounting slots to attach sign-mounting brackets (sold separately).

These binders mount to machines, equipment, and walls. Rigid document protectors allow you to quickly flip through these carousel-style binders. Protectors snap in and out.

Multi-document protectors have four clear plastic sleeves attached to single rigid protector, so you can place more documents in your binder.

Index tabs clip onto document protectors to organize your binder.

Desk stands allow you to mount up to six binders for freestanding use.

Adjustable-arm and telescoping mounts clamp to the edge of a desk or shelf and hold up to two binders. Adjustable-arm mounts pivot up and down. Telescoping mounts can be raised or lowered to the height you need.

Display documents on a desktop or other flat surface using these binders, which have a sanitary design. They contain a silver ion compound that prevents the growth of bacteria, mold, and other microbes, limiting the spread of germs as people flip through them. These binders are good for offices, warehouses, clinics, hospitals, and other shared spaces. Made of steel, they stand up to the wear and tear of daily use.

Binders come with 10 protectors for holding documents such as menus, pamphlets, operating instructions, and safety procedures. These protectors are plastic, so they shield fragile paper from rips, tears, and liquid. They remain rigid as you flip through them thanks to their reinforced edges. Snap them in and out of the binders as needed. Each binder can hold up to two additional bindings.

Use index tabs to mark specific pages and organize your binder.

Product registration requirements restrict sales to the listed areas.

Mount these binders to machines, equipment, walls, and flat surfaces to create permanent viewing spots and free up desk space—they display documents in a way that’s sanitary for all users. Containing a silver ion compound that prevents the growth of bacteria, mold, and other microbes, they limit the spread of germs as people flip through them. Use these binders in shared spaces such as offices, warehouses, clinics, and hospitals.

Each binder comes with 10 protectors for holding documents such as menus, pamphlets, operating instructions, and safety procedures. The protectors are plastic, so they shield fragile paper from rips, tears, and liquid. To remain rigid as you flip through, they have reinforced edges. Snap them in and out of the binders as needed.

Stainless steel binders resist rust and corrosion, so they’re better for wet and humid environments, outdoor locations, and areas that are exposed to washdowns.

Optional stands and mounts add different mounting capabilities. Desk stands sit on any flat surface and tilt binders at an angle for easy reading. Adjustable-arm and telescoping mounts clamp onto the lip of a desk or counter and save space by holding documents in the air. Raise and lower them to the right height; adjustable-arm mounts also rotate and pivot to switch between users.

Add index tabs to mark specific pages and organize your binder.

Product registration restrictions restrict sales to the listed areas.

Place these on top of a machine or table, then relocate them as you see fit. Rigid document protectors allow you to quickly flip through these carousel-style binders. Protectors snap in and out. Each binding holds up to ten protectors.

Multi-document protectors have four clear plastic sleeves attached to single rigid protector, so you can place more documents on your binder.

Index tabs clip onto document protectors to organize your binder.

These binders hold 12" of pages for displaying reference books and catalogs. For use with three-hole punched documents. They require three-ring bindings (sold separately). You may attach multiple bindings using the included slide hooks, but cannot exceed the total binding capacity.

3-ring bindings allow better viewing of thick documents.

Protect sets of documents or thick instruction manuals.

Carry these boxes from job to job and mount them near equipment to lock out valves, electrical controls, and other machines with fewer padlocks, saving your team time. With these lockout boxes, you only need one padlock to lock out a piece of equipment. When starting maintenance work, have each person lock their own padlock to the outside of the box and place their key inside. The keys are only accessible once everyone has removed their padlocks, keeping your team safe. Each box has hooks to keep your keys organized and easy to identify. Once these boxes are locked, you can still add keys through a slot. All boxes help you comply with OSHA 29 CFR 1910.147 procedures for controlling hazardous energy.

Stainless steel boxes resist corrosion better than steel boxes, and they’re powder coated for even more corrosion resistance. They’re stronger than plastic boxes, but weaker than steel boxes.

Boxes with a polycarbonate plastic window let you view the keys inside. Thanks to its material, the window protects your keys from water exposure and resists impact to prevent break-ins.

Boxes with a document display let you view checklists and permits as you lock out equipment, reducing the risk of injury. Thanks to an IP-rated gasket, they’ll keep your documents protected in damp environments. The lock caddy is removable so it’s easy to transport your padlocks and keys during lockout. For easy retrieval of the keys you drop through the slot, the key cup that collects them is removable as well.

Boxes with a control-lock hole have a dedicated spot for supervisors to lock the box closed.

Boxes with a dry erase label are helpful to write down permit and work order numbers.