Unlock the outside knob with a combination; the inside knob is always unlocked. These handles are mechanical and do not require electrical wiring or batteries. They are UL Listed for use with three-hour fire doors.

Select a knob with the correct backset distance (the distance from the door’s edge to the center of the knob's mounting hole) for your door. Latch bolt projection is the length the latch bolt extends from the door's edge.

Handles with nonlocking turnpiece are for doors that need to be unlocked for long periods of time. The turnpiece is on the inside and overrides the combination so the door can be opened freely from the outside.

For technical drawings and 3-D models, click on a part number.

To gain access from the outside with a key as well as a combination, these handles accept an easy-change lock cylinder. The inside handle is always unlocked. These handles are UL-Listed for three-hour fire doors. They are programmable so you can assign different combinations to different people and restrict access when necessary.

Select a handle with the correct backset distance (the distance from the door’s edge to the center of the handle's mounting hole) for your door. Latch bolt projection is the length the latch bolt extends from the door's edge.

Handle for use outdoors has a double-sealed keypad.

For technical drawings and 3-D models, click on a part number.

Open the outside handle with a combination or the included key; the inside handle is always unlocked. These handles are programmable so you can assign different combinations to different people and restrict access when necessary. They are UL Listed for three-hour fire doors.

Select a handle with the correct backset distance (the distance from the door’s edge to the center of the handle's mounting hole) for your door. Latch bolt projection is the length the latch bolt extends from the door's edge.

Handle for use outdoors has a double-sealed keypad.

For technical drawings and 3-D models, click on a part number.

The easy-to-read backlit screen turns on when touched and enters sleep mode when inactive to conserve battery life. Open the outside handle with a combination or the included key; the inside handle is always unlocked. This handle is UL-Listed for three-hour fire doors. It is programmable so you can assign different combinations to different people and restrict access when necessary.

Backset distance is the distance from the door’s edge to the center of the handle's mounting hole. Latch bolt projection is the length the latch bolt extends from the door's edge.

For technical drawings and 3-D models, click on a part number.

These handles accept optional HID-compatible proximity cards or key fobs to regulate access for up to 5,000 employees. Download free software to track employee traffic, program access times, assign different combinations to different people, and restrict access when necessary. Unlock the outside handle with a combination, the included key, or an optional proximity card or key fob. The inside handle is always unlocked.

Backset distance is the distance from the door’s edge to the center of the handle's mounting hole. Latch bolt projection is the length the latch bolt extends from the door's edge.

The movement of the lever from opening and closing the door generates the power this handle needs. It's programmable so you can assign different combinations to different people and restrict access when necessary. It's UL Listed for three-hour fire doors. Open the outside handle with a combination or the included key; the inside handle is always unlocked.

Backset distance is the distance from the door’s edge to the center of the handle's mounting hole. Latch bolt projection is the length the latch bolt extends from the door's edge.

For outdoor use, add the optional weather shield (sold separately).

For technical drawings and 3-D models, click on a part number.

For use alone or as part of an access-control system, these locks use electromagnetic force to hold single doors closed. Control the locks with a push-button switch or keypad door control (sold separately). When power is interrupted, they instantly release. All locks must be hardwired.

Flush mount locks mount under the door frame header. For locks with 500 lbs. and 1,500 lbs. of holding strength, a 5/8" thick filler plate (sold separately) is required if the mounting surface on the frame is less than 2" wide.

Offset mount locks mount on the door frame header and include a mounting bracket that extends the strike plate above the door.

Locks with instant locking action lock doors as soon as they are closed. Those with delayed locking action lock doors after a set amount of time.

Optional battery backup packs supply power during power interruptions.

For technical drawings and 3-D models, click on a part number.

All of these strike plates can be used with door handles and knobs. The ROFU 1505 and Rutherford S65 strike plates can also be used with pry-resistant door handles and knobs. Use them all to regulate access to doors by holding or releasing a lock's latch with a signal from a push-button switch, keypad control, or card reader. Strike plates must be hardwired.

When replacing an electric strike plate, first select one that will work with your lock type so that the latch will align properly with the plate. Next, choose a strike plate that can accommodate your latch bolt projection (how far the latch bolt extends from the door's edge). Then, match the size of the strike plate to your door frame cutout. If you don't find an exact match, choose a strike plate with a smaller size than your cutout.

Rutherford and Von Duprin strike plates meet UL 1034 for burglary resistance.

For technical drawings and 3-D models, click on a part number.

These versatile strike plates are for use with door handles and knobs, pry-resistant door handles and knobs, and pry-resistant crossbars. They regulate access to doors by holding or releasing a lock's latch with a signal from a push-button switch, keypad control, or card reader. All of these strike plates must be hardwired. They meet UL 1034 for burglary resistance.

When replacing an electric strike plate, first select one that will work with your lock type so that the latch will align properly with the plate. Next, choose a strike plate that can accommodate your latch bolt projection (how far the latch bolt extends from the door's edge). Then, match the size of the strike plate to your door frame cutout. If you don't find an exact match, choose a strike plate with a smaller size than your cutout.

For technical drawings and 3-D models, click on a part number.

If your lock latches to a mechanism that's mounted to the door's surface instead of in the door jamb, select this strike plate. It regulates access to doors by holding or releasing a lock's latch with a signal from a push-button switch, keypad control, or card reader. Strike plates must be hardwired.

When replacing an electric strike plate, first select one that will work with your lock type so that the latch will align properly with the plate. Next, choose a strike plate that can accommodate your latch bolt projection (how far the latch bolt extends from the door's edge). Then, match the size of the strike plate to your door frame cutout. If you don't find an exact match, choose a strike plate with a smaller size than your cutout.

Use these strike plates with touch bars and crossbars, but not pry-resistant crossbars. They regulate access to doors by holding or releasing a lock's latch with a signal from a push-button switch, keypad control, or card reader. Strike plates must be hardwired.

When replacing an electric strike plate, first select one that will work with your lock type so that the latch will align properly with the plate. Then, choose a strike plate that can accommodate your latch bolt projection (how far the latch bolt extends from the door's edge).

For technical drawings and 3-D models, click on a part number.

Enter a combination to operate electromagnetic locks, electric door strikes, and other access control devices. This control can also be used with alarm systems and motion detectors.

For technical drawings and 3-D models, click on a part number.

Built to mount outdoors, these keypads are made of stainless steel. Enter a combination to operate electromagnetic locks, electric door strikes, and other access control devices.

Gain access from the outside with a combination or an included key. These automatically lock when you close the door. Locks have a latch bolt and a deadlocking latch. The latch can be held in the retracted position to allow unrestricted entry.

Select a lock with the correct backset distance (the distance from the door’s edge to the center of the lock's mounting hole) for your door. Latch bolt projection is the length the latch bolt extends from the door's edge.

Metal door adapter kits (sold separately) include a surface-mounted strike plate, a riser plate, and shims for metal door installations.

For technical drawings and 3-D models, click on a part number.

Enter a combination and turn the turnpiece to unlock these locks from the outside; they automatically lock when you close the door. Locks have a latch bolt and a deadlocking latch. The latch can be held in the retracted position to allow unrestricted entry.

Select a lock with the correct backset distance (the distance from the door’s edge to the center of the lock's mounting hole) for your door. Latch bolt projection is the length the latch bolt extends from the door's edge.

Metal door adapter kits (sold separately) include a surface-mounted strike plate, a riser plate, and shims for metal door installations.

For technical drawings and 3-D models, click on a part number.

Enter a combination and turn the turnpiece to unlock these locks from the outside; turn the inside or outside turnpiece to manually relock them.

Select a lock with the correct backset distance (the distance from the door’s edge to the center of the lock's mounting hole) for your door. Latch bolt projection is the length the latch bolt extends from the door's edge.

Metal door adapter kits (sold separately) include a surface-mounted strike plate, a riser plate, and shims for metal door installations.

For technical drawings and 3-D models, click on a part number.

For use alone or as part of an access-control system, this lock uses electromagnets to hold gates closed. Control the lock with a push-button switch or keypad control (sold separately). It locks automatically as soon as the gate is closed. When power is interrupted, the lock instantly releases.

Optional backup battery pack supplies power during power interruptions.

Filler plate is required if the mounting surface is less than 2" wide.

For technical drawings and 3-D models, click on a part number.

Also known as jackshafts, these openers operate 24-ga. or thinner overhead doors. The opener will stop and reverse the door's downward motion if it encounters an obstruction when closing or the light beam between the opener's light beam sensing switches is interrupted. During a power failure, use the manual chain hoist to move the door. All of these openers meet UL 325 safety standards for door operators and systems.

When facing the side of the door with the opener, a right-side mount opener is located on the right side of the door, left-side mount is on the left. An optional remote transmitter is sold separately.

Replace existing transmitters or team a transmitter and a receiver (not included) to remotely operate your automatic overhead door openers.

Universal transmitters are compatible with Chamberlain, Craftsman, Genie, Liftmaster, Multicode, and Stanley openers. They can operate two door openers.

DIP-switch transmitters are compatible with Liftmaster openers that have a DIP-switch receiver. Use them to operate a single door. The three-button model has open, close, and stop functions.

If you don't have your remote, you can still open and close automatic overhead doors with a private 4-digit PIN. Use these transmitters to operate one transmitter or receiver. The keypad is backlit for visibility in the dark.

Hardwire these switches to automatic door openers, electromagnetic locks, and electric strikes to open doors with the touch of a button or wave of a hand. Mount them to electrical boxes or surface-mount boxes (sold separately). Instant-open switches provide immediate access. Time-delay switches allow time to reach the door before it opens.

Style 1-7 switches operate with the touch of a button. Style 7 switches are 36 in. tall, so they’re easy to push with a foot, cane, crutch, or other device.

For technical drawings and 3-D models, click on a part number.

Nudge your door and these openers will open it the rest of the way. You can also pair them with automatic door switches and buttons. Their delayed closing action holds the door open for a set amount of time before closing. These openers are for doors that weigh up to 200 lbs. and must be hardwired. They are reversible for right or left door-swing directions.

Reset fire panels, or open electromagnetic locks, electric strikes, and automatic door openers. These switches require a key to turn circuits on or off, limiting access and preventing accidental activation. The lock is not included; use a 1 1/4" long mortise lock with a standard cam.

Switches with a delayed start timer allow personnel to reach a door before it opens.

For technical drawings and 3-D models, click on a part number.

Use fingerprints to confirm the identity of personnel before granting access to secure areas or equipment. Switches light up green to indicate that they have accepted the fingerprint and are sending an output signal. The front faces of the switches meet NEMA 12 and IP65. The rear faces of the switches meet IP20.

For technical drawings and 3-D models, click on a part number.