McMaster-Carr logo
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    101 Products

    Door Kick Plates

    Kick plates prolong the life of doors by shielding them from scratches, dings, and marks in high-traffic areas. They also keep moisture from damaging the base of doors in facilities that require frequent mopping and cleaning. Our kick plates are tested with salt spray to meet ANSI A156.6 requirements for strength, appearance, and durability. They stay looking like new, even when installed outdoors in humid or wet environments.
    Screw In
    Image of Product. Front orientation. Door Kick Plates. Screw In.
    Mount with the included self-drilling screws and skip drilling a hole. The screws match the finish of the plates and sit flush to create a clean, smooth look.
    304 Stainless Steel—The choice for most wet and outdoor environments. These plates withstand frequent washdowns but won’t hold up to harsh chemicals, such as bleach, as well as 316 stainless steel.
    316 Stainless Steel—The most corrosion-resistant kick plates we offer. These won’t corrode when exposed to deicing salts used on sidewalks or harsh chemicals used to sanitize medical and pharmaceutical settings.
    Aluminum—At one-third the weight of stainless steel, these kick plates won’t weigh down swinging doors. Like 304 stainless steel, they won’t corrode when exposed to moisture, but they are more likely to scratch and dent.
    Brass—With a shiny, warm finish, these kick plates give doors an elegant appeal. They resist corrosion about as well as 304 stainless steel but require occasional polishing to clean up smudges and avoid tarnish.
    Bronze—Outfit public facing doors with a decorative look that hides smudges and marks. Unlike bronze-plated imposters, these solid bronze kick plates will last for decades without any need to replate them. They resist corrosion as well as 304 stainless steel and are slightly stronger than brass plates to prevent scratches and dents.
    Width—Select a kick plate 2" narrower than your door to prevent obstructions when opening and closing it.
    Height—Kick plates 34" to 46" in height guard against damage from carts or dollies better than shorter plates.
    Ht.
    Thk.
    For Use
    Outdoors
    Mounting Fasteners
    Included
    Dull 304 Stainless
    Steel
    Dull 316 Stainless
    Steel
    Dull
    Aluminum
    Dull
    Bronze
    Polished
    Brass
    24" Wide
    34"0.05"YesYes0000000
    0000000
    0000000
    0000000
    0000000
    0000000
     
    28" Wide
    6"0.05"YesYes0000000
    00000
    00000
    00000
    00000
    000000
    8"0.05"YesYes0000000
    00000
    00000
    00000
    000000
    000000
    10"0.05"YesYes0000000
    00000
    00000
    00000
    000000
    000000
    12"0.05"YesYes0000000
    00000
    00000
    00000
    000000
    000000
    36"0.05"YesYes0000000
    000000
    000000
    000000
    000000
    000000
    42"0.05"YesYes0000000
    000000
    000000
    000000
    000000
    000000
     
    30" Wide
    6"0.05"YesYes0000000
    00000
    00000
    00000
    00000
    000000
    8"0.05"YesYes0000000
    00000
    00000
    00000
    000000
    000000
    10"0.05"YesYes0000000
    00000
    00000
    00000
    000000
    000000
    12"0.05"YesYes0000000
    00000
    00000
    00000
    000000
    000000
     
    34" Wide
    6"0.05"YesYes0000000
    00000
    00000
    00000
    000000
    000000
    8"0.05"YesYes0000000
    00000
    00000
    00000
    000000
    000000
    10"0.05"YesYes0000000
    00000
    00000
    00000
    000000
    000000
    12"0.05"YesYes0000000
    00000
    00000
    00000
    000000
    000000
    16"0.05"YesYes0000000
    00000
    000000
    00000
    000000
    000000
    34"0.05"YesYes0000000
    000000
    000000
    000000
    000000
    000000
    36"0.05"YesYes0000000
    000000
    000000
    000000
    000000
    000000
    46"0.05"YesYes0000000
    000000
    000000
    000000
    000000
    000000
     
    36" Wide
    8"0.05"YesYes0000000
    00000
    00000
    00000
    000000
    000000
    10"0.05"YesYes0000000
    00000
    00000
    00000
    000000
    000000
    12"0.05"YesYes0000000
    00000
    000000
    00000
    000000
    000000
     
    48" Wide
    8"0.05"YesYes0000000
    00000
    00000
    00000
    000000
    000000
    12"0.05"YesYes0000000
    00000
    000000
    00000
    000000
    000000
    16"0.05"YesYes0000000
    000000
    000000
    000000
    000000
    000000
     
    Adhesive Back
    Image of Product. Front orientation. Door Kick Plates. Adhesive Back.
    Peel and stick these plates directly to doors without having to pick up any hand tools.
    304 Stainless Steel—The choice for most wet and outdoor environments. These plates withstand frequent washdowns but won’t hold up to harsh chemicals, such as bleach, as well as 316 stainless steel.
    Width—Select a kick plate 2" narrower than your door to prevent obstructions when opening and closing it.
    Height—Kick plates 34" to 46" in height guard against damage from carts or dollies better than shorter plates.
    Dull 304
    Stainless Steel
    Ht.
    Thk.
    For Use
    Outdoors
    Each
    24" Wide
    34"0.05"Yes00000000000000
     
    28" Wide
    6"0.05"Yes000000000000
    8"0.05"Yes000000000000
    10"0.05"Yes000000000000
    12"0.05"Yes0000000000000
    36"0.05"Yes0000000000000
    42"0.05"Yes0000000000000
     
    30" Wide
    6"0.05"Yes000000000000
    8"0.05"Yes000000000000
    10"0.05"Yes000000000000
    12"0.05"Yes0000000000000
     
    34" Wide
    6"0.05"Yes000000000000
    8"0.05"Yes000000000000
    10"0.05"Yes0000000000000
    12"0.05"Yes0000000000000
    16"0.05"Yes0000000000000
    34"0.05"Yes0000000000000
    36"0.05"Yes0000000000000
    46"0.05"Yes0000000000000
     
    36" Wide
    8"0.05"Yes000000000000
    10"0.05"Yes0000000000000
    12"0.05"Yes0000000000000
     
    48" Wide
    8"0.05"Yes0000000000000
    12"0.05"Yes0000000000000
    16"0.05"Yes0000000000000
     

    Lever-Operated Door-Mount Door Holders

    Image of Product. Front orientation. Contains Annotated. Door Holders. Lever-Operated Door-Mount Door Holders, Style 1.
    Image of Product. Front orientation. Contains Annotated. Door Holders. Lever-Operated Door-Mount Door Holders, Style 2.
    Image of Product. Front orientation. Contains Annotated. Door Holders. Lever-Operated Door-Mount Door Holders, Style 3.

    Style 1

    Style 2

    Style 3

    Flip holders down to keep doors open; flip up to release. All have a nonmarring, replaceable rubber pad.
    Styles 1 and 2—Styles 1 and 2 meet ANSI/BHMA A156.16 durability, strength, and performance standards for door controls.
    Style 3—Style 3 can be secured in the up position when not in use.
    Door-to-Floor Clearance—Door-to-floor clearance is the distance from the floor to the bottom edge of your door.
    Door Holders
    Replacement
    Rubber Door Bumpers
    Style
    Material
    Lg.
    Door-to-Floor
    Clearance
    Mounting Hardware
    Included
    Specs. Met
    Includes
    Each
    Pkg.
    Qty.
    Pkg.
    1Dull Aluminum-Coated Iron3 3/4"1/4" to 2"YesANSI/BHMA A156.16Nonmarring Rubber Pad00000000000006000000000000
    1Dull Aluminum-Coated Iron4 3/4"1/4" to 3"YesANSI/BHMA A156.16Nonmarring Rubber Pad000000000000600000000000
    1Dull Brass-Plated Iron3 3/4"1/4" to 2"YesANSI/BHMA A156.16Nonmarring Rubber Pad000000000000600000000000
    1Dull Brass-Plated Iron4 3/4"1/4" to 3"YesANSI/BHMA A156.16Nonmarring Rubber Pad000000000000600000000000
    1Dull Bronze-Plated Iron3 3/4"1/4" to 2"YesANSI/BHMA A156.16Nonmarring Rubber Pad000000000000600000000000
    1Dull Bronze-Plated Iron4 3/4"1/4" to 3"YesANSI/BHMA A156.16Nonmarring Rubber Pad000000000000600000000000
    2Dull Bronze-Plated Brass3 3/4"1/4" to 2"YesANSI/BHMA A156.16Nonmarring Rubber Pad00000000000600000000000
    2Dull Bronze-Plated Brass4 3/4"1/4" to 3"YesANSI/BHMA A156.16Nonmarring Rubber Pad00000000000600000000000
    2Dull Chrome-Plated Brass3 3/4"1/4" to 2"YesANSI/BHMA A156.16Nonmarring Rubber Pad00000000000600000000000
    2Dull Chrome-Plated Brass4 3/4"1/4" to 3"YesANSI/BHMA A156.16Nonmarring Rubber Pad00000000000600000000000
    3Dull Zinc-Plated Steel4"1/2" to 5"Yes—Nonmarring Rubber Pad000000000000200000000000
    3Dull Zinc-Plated Steel5"1/2" to 6"Yes—Nonmarring Rubber Pad000000000000200000000000
    3Dull Zinc-Plated Steel6"1/2" to 7"Yes—Nonmarring Rubber Pad000000000000200000000000
    3Dull Zinc-Plated Steel8"1/2" to 9"Yes—Nonmarring Rubber Pad000000000000200000000000
    3Dull Zinc-Plated Steel12"1/2" to 13"Yes—Nonmarring Rubber Pad000000000000200000000000
     

    Shock-Absorbing Door Bumpers

    Image of ProductInUse. Front orientation. Door Bumpers.
    Image of Product. Front orientation. Door Bumpers.
    Protect large swinging doors where carts and vehicles are used to push the door open. These plastic bumpers are commonly used on two-way swinging doors. All are chemical resistant and won't dry out and become brittle when exposed to UV rays. Mount with the included screws.
    For Door
    Wd.
    Wd.
    Ht.
    Thk.
    Projection
    Material
    Nonmarking
    Mounting Fasteners
    Included
    Color
    Each
    Unthreaded-Hole Mount
    30"24 1/4"24"1/4"3"PolyethyleneNoYesBlack0000000000000000
    36"30 1/2"24"1/4"3"PolyethyleneNoYesBlack000000000000000
    36"31"42"1/4"4"PolyethyleneNoYesBlack000000000000000
    48"41"42"1/4"4"PolyethyleneNoYesBlack000000000000000
     

    Reinforcing Door Edge Plates

    Image of Product. Front orientation. Door Edge Plates. Reinforcing Door Edge Plates.
    Fortify a door's base as well as its bottom edge to guard them against damage from foot traffic and equipment. These plates can also be used to salvage rusted, rotted, or otherwise damaged doors. All can be used outdoors. Mount them with fasteners.
    Stainless Steel—Stainless steel plates have excellent corrosion resistance and good chemical resistance.
    Aluminum—Aluminum plates are lightweight and have good corrosion resistance.
    Dull
    Stainless Steel
    Dull Aluminum
    Wd.
    For Door
    Thk.
    Kick Plate
    Ht.
    Thk.
    For Use
    Outdoors
    Mounting Fasteners
    Included
    Each
    Each
    29 1/2"1 3/4"7"0.05"YesYes000000000000000000000000000
    31 1/2"1 3/4"7"0.05"YesYes0000000000000000000000000
    35 1/2"1 3/4"7"0.05"YesYes0000000000000000000000000
     

    Door Edge Plates

    Image of Product. Front orientation. Door Edge Plates. Style 1.
    Image of Product. Front orientation. Door Edge Plates. Style 2.
    Image of Attribute. Front orientation. Contains Annotated. For Standard Door Edge Profile.
    Image of Attribute. Front orientation. Contains Annotated. For Beveled Door Edge Profile.

    Style 1

    Style 2

    For

    Standard

    Door Edge

    Profile

    For Beveled

    Door Edge

    Profile

    Reinforce the edge of a door to guard it against damage from foot traffic and equipment. These plates can also be used to salvage rusted, rotted, or otherwise damaged doors. Made of stainless steel, all of these plates have excellent corrosion resistance and good chemical resistance. They can be used outdoors. Mount them with fasteners.
    Style 2—Style 2 wraps around the entire edge for added protection.
    For
    Door
    Dull
    Stainless Steel
    Lg.
    Edge
    Angle
    Thk.
    Flange
    Wd.
    Thk.
    For Use
    Outdoors
    Mounting Fasteners
    Included
    Each
    Style 1
     
    For Standard Door Edge Profile
    36"90°1 3/4"1 1/4"0.05"YesYes00000000000000
    42"90°1 3/4"1 1/4"0.05"YesYes0000000000000
    84"90°1 3/4"3/4"0.06"YesYes0000000000000
     
    For Beveled Door Edge Profile
    36"93°1 3/4"1 1/4"0.05"YesYes0000000000000
    42"93°1 3/4"1 1/4"0.05"YesYes0000000000000
    84"92°1 3/4"3/4"0.06"YesYes0000000000000
     
    Style 2
     
    For Standard Door Edge Profile
    36"90°1 3/4"1 1/4"0.05"YesYes0000000000000
    42"90°1 3/4"1 1/4"0.05"YesYes0000000000000
    84"90°1 3/4"3/4"0.06"YesYes0000000000000
     
    For Beveled Door Edge Profile
    36"93°1 3/4"1 1/4"0.05"YesYes0000000000000
    42"93°1 3/4"1 1/4"0.05"YesYes0000000000000
    84"91°1 3/4"3/4"0.06"YesYes0000000000000
     

    Foot-Operated Door-Mount Door Holders

    Image of Product. Front orientation. Contains Annotated. Door Holders. Foot-Operated Door-Mount Door Holders, Style 1.
    Image of Product. Front orientation. Contains Annotated. Door Holders. Foot-Operated Door-Mount Door Holders, Style 2.
    Image of Product. Front orientation. Contains Annotated. Door Holders. Foot-Operated Door-Mount Door Holders, Style 3.
    Image of Product. Front orientation. Contains Annotated. Door Holders. Foot-Operated Door-Mount Door Holders, Style 4.

    Style 1

    Style 2

    Style 3

    Style 4

    Step on the spring-operated plunger to hold your door in place; tap on the release lever to free it. All have a nonmarring, replaceable rubber pad.
    Styles 1 and 3—Styles 1 and 3 meet ANSI/BHMA 156.16 durability, strength, and performance standards for door controls.
    Door Holders
    Replacement
    Rubber Door Bumpers
    Style
    Material
    Color
    Plunger
    Extension
    Ht.
    Wd.
    Mounting Hardware
    Included
    Specs. Met
    Includes
    Each
    Pkg.
    Qty.
    Pkg.
    1Dull Bronze-Plated Brass—1 1/4"5 3/8"1 3/8"YesANSI/BHMA A156.16Nonmarring Rubber Pad0000000000006000000000000
    1Dull Chrome-Plated Brass—1 1/4"5 3/8"1 3/8"YesANSI/BHMA A156.16Nonmarring Rubber Pad00000000000600000000000
    1Polished Brass-Plated Brass—1 1/4"5 3/8"1 3/8"YesANSI/BHMA A156.16Nonmarring Rubber Pad00000000000600000000000
    2Dull Aluminum-Coated Aluminum—2 3/8"7"1 1/4"Yes—Nonmarring Rubber Pad00000000000010000000000000
    3Dull Aluminum-Coated Aluminum—1 5/8"6 1/4"1 1/2"YesANSI/BHMA A156.16Nonmarring Rubber Pad00000000000600000000000
    4Dull Aluminum-Coated Zinc—1 1/8"7"1 5/8"Yes—Nonmarring Rubber Pad000000000000060000000000000
    4Dull ZincBrown1 1/8"7"1 5/8"Yes—Nonmarring Rubber Pad000000000000060000000000000
    4Polished Brass-Plated Zinc—1 1/8"7"1 5/8"Yes—Nonmarring Rubber Pad000000000000060000000000000
     
    back to top