About Cabinet Door and Drawer Locks
More
About AC to AC Voltage Transformers
For single-phase equipment, use this formula to find power output: VA = Volts × Amps
For three-phase equipment, use this formula to find power output: VA = Volts × Amps × 1.73
More
Door Latch Guards
Cover the gap between your door and frame to protect the latch bolt from being pried open.
For technical drawings and 3-D models, click on a part number.
Dull Stainless Steel | Polished Chrome-Plated Steel | Painted Steel Brown | |||||||
|---|---|---|---|---|---|---|---|---|---|
| Lg. | Wd. | For Door Swing Direction | Mounting Hardware Included | Each | Each | Each | |||
Opens Toward You | |||||||||
| 7" | 2 3/4" | Left, Right | Yes | 00000000 | 000000 | 00000000 | 000000 | 00000000 | 000000 |
| 11" | 3" | Left, Right | Yes | 00000000 | 00000 | 000000 | 00 | 00000000 | 00000 |
| 11 3/4" | 3 1/2" | Left, Right | Yes | 000000 | 00 | 00000000 | 00000 | 000000 | 00 |
Opens Away From You | |||||||||
| 6" | 1/2" | Left, Right | Yes | 000000 | 00 | 00000000 | 00000 | 00000000 | 00000 |
| 12" | 1/2" | Left, Right | Yes | 000000 | 00 | 00000000 | 00000 | 00000000 | 00000 |
Keyed Alike Locking Door Knob Guards
Choose this guard if you need several door knob guards that open with the same key. It blocks access to door knobs.
For technical drawings and 3-D models, click on a part number.
| For Knob Dia. | ID | OD | Inside Dp. | Keying | For Door Swing Direction | Material | Finish | Each | |
| 1 1/2"-2 5/16" | 2 3/8" | 2 7/8" | 1 7/8" | Keyed Alike | Left, Right | Aluminum | Painted Gray | 00000000 | 000000 |
Locking Door Knob Guards
Choose this guard if you need door knob guards that each open with a different key. It blocks access to door knobs.
For technical drawings and 3-D models, click on a part number.
| For Door Knob Dia. | ID | OD | Inside Dp. | Keying | For Door Swing Direction | Material | Finish | Each | |
| 1 1/2"-2 5/16" | 2 3/8" | 2 7/8" | 1 7/8" | Keyed Differently | Left, Right | Aluminum | Painted Gray | 00000000 | 000000 |
Door Knob Guards
Protect your door knobs from being broken off to gain entry.
For technical drawings and 3-D models, click on a part number.
| For Max. Faceplate Dia. | Wd. | Projection | Lg. | For Door Swing Direction | Material | Finish | Mounting Hardware Included | Each | |
| 2 11/16" | 3 1/2" | 3" | 3 1/2" | Left, Right | Steel | Painted Gray | Yes | 00000000 | 000000 |
Locking Door Handle Guards
Choose this guard if you need door handle guards that each open with a different key. It blocks access to door handles.
For technical drawings and 3-D models, click on a part number.
| ID | OD | Inside Dp. | Keying | For Door Swing Direction | Material | Finish | Each | |
| 2 3/8" | 2 7/8" | 1 7/8" | Keyed Differently | Left, Right | Aluminum | Painted Gray | 00000000 | 000000 |
Keyed Alike Locking Door Handle Guards
Choose this guard if you need several door handle guards that open with the same key. It blocks access to door handles.
For technical drawings and 3-D models, click on a part number.
| ID | OD | Inside Dp. | Keying | For Door Swing Direction | Material | Finish | Each | |
| 2 3/8" | 2 7/8" | 1 7/8" | Keyed Alike | Left, Right | Aluminum | Painted Gray | 00000000 | 000000 |
Padlockable Door Lock Plates
Temporarily secure doors while repairing or replacing a handle. Fasten this reusable plate to a door frame using the screw holes from your existing strike plate. Secure with a padlock (not included).
For technical drawings and 3-D models, click on a part number.
| For Door Thick. | For Min. Door Frame Dp. | For Door Swing Direction | For Door Frame Material | For Max. Padlock Shackle Dia. | Finish | Mounting Hardware Included | Each | |
| 1 3/4" | 2" | Left, Right | Metal | 5/16" | Dull Steel Clad | Yes | 0000000 | 000000 |
Mounting Plates for Door Handles and Knobs
Use these mounting plates to reinforce the door around your handle to guard against forced entry. Select a mounting plate with the correct backset distance (the distance from the door’s edge to the center of your handle's mounting hole) for your door.
For technical drawings and 3-D models, click on a part number.
2 3/8" Backset Distance | 2 3/4" Backset Distance | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| For Door Thick. | Ht. | Through Hole Dia. | For Door Material | Mounting Hardware Included | Wd. | Each | Wd. | Each | |||
Polished Brass-Plated Brass | |||||||||||
| A | 1 3/8" | 9" | 2 1/8" | Metal, Wood | Yes | 4" | 0000000 | 000000 | 4 1/4" | 0000000 | 000000 |
| A | 1 3/4" | 9" | 2 1/8" | Metal, Wood | Yes | 4" | 0000000 | 00000 | 4 1/4" | 0000000 | 00000 |
Dull Stainless Steel | |||||||||||
| A | 1 3/8" | 9" | 2 1/8" | Metal, Wood | Yes | 4" | 0000000 | 00000 | 4 1/4" | 0000000 | 00000 |
| A | 1 3/4" | 9" | 2 1/8" | Metal, Wood | Yes | 4" | 0000000 | 00000 | 4 1/4" | 0000000 | 00000 |
| B | 1 3/4" | 9" | 2 1/8" | Metal, Wood | Yes | 4 3/4" | 00000000 | 00000 | 4 3/4" | 00000000 | 00000 |
Mounting Plates for Pry-Resistant Door Handles and Knobs
Use these mounting plates to reinforce the door around your pry-resistant handle to guard against forced entry. Backset distance is the distance from the door’s edge to the center of the handle's mounting hole.
For technical drawings and 3-D models, click on a part number.
Strike Plates for Door Handles and Knobs
Plates with extended lip prevent latches from damaging door frames when your door is set deep in the frame.
For technical drawings and 3-D models, click on a part number.
Strike Plates for Deadbolt Door Locks
and
Wood Doors
For technical drawings and 3-D models, click on a part number.
Door Hole Covers
Conceal up to 2 1/8" dia. holes created when you remove a door handle.
For technical drawings and 3-D models, click on a part number.
Electric Door Strike Plates for Door Handles and Knobs
All of these strike plates can be used with door handles and knobs. The ROFU 1505 and Rutherford S65 strike plates can also be used with pry-resistant door handles and knobs. Use them all to regulate access to doors by holding or releasing a lock's latch with a signal from a push-button switch, keypad control, or card reader. Strike plates must be hardwired.
When replacing an electric strike plate, first select one that will work with your lock type so that the latch will align properly with the plate. Next, choose a strike plate that can accommodate your latch bolt projection (how far the latch bolt extends from the door's edge). Then, match the size of the strike plate to your door frame cutout. If you don't find an exact match, choose a strike plate with a smaller size than your cutout.
Rutherford and Von Duprin strike plates meet UL 1034 for burglary resistance.
For technical drawings and 3-D models, click on a part number.
For Cutout | Faceplate | Voltage | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Max. Latch Bolt Projection | Ht. | Wd. | Dp. | Ht. | Wd. | Holding Strength, lbs. | AC | DC | For Door Frame Material | For Door Swing Direction | Mounting Hardware Included | Appearance | Choose a Finish | Each | |
ROFU 1505 | |||||||||||||||
| 5/8" | 3 1/2" | 7/8" | 1 1/8" | 5 7/8" | 1 1/4" | 1,000 | 8V-16V | 3V-6V | Wood | Left, Right | Yes | Dull | 0000000 | 0000000 | |
ROFU 1509 | |||||||||||||||
| 5/8" | 3 1/2" | 1" | 1 1/8" | 7 15/16" | 1 7/16" | 1,000 | 8V-16V | 3V-6V | Metal, Wood | Left, Right | Yes | Dull | Aluminum | 0000000 | 000000 |
Rutherford S65 | |||||||||||||||
| 3/4" | 3 3/8" | 5/8" | 1 3/16" | 4 7/8" | 1 1/4" | 1,000 | 12V-24V | 12V/24V | Metal, Wood | Left, Right | Yes | Dull | Stainless Steel | 0000000 | 000000 |
Von Duprin 5100 | |||||||||||||||
| 1/2" | 3 3/8" | 1" | 1 3/8" | 4 7/8" | 1 1/4" | 1,000 | __ | 12V/24V | Metal, Wood | Left, Right | Yes | Dull | 000000 | 000000 | |
Electric Door Strike Plates for Touch Bars and Crossbars
Use these strike plates with touch bars and crossbars, but not pry-resistant crossbars. They regulate access to doors by holding or releasing a lock's latch with a signal from a push-button switch, keypad control, or card reader. Strike plates must be hardwired.
When replacing an electric strike plate, first select one that will work with your lock type so that the latch will align properly with the plate. Then, choose a strike plate that can accommodate your latch bolt projection (how far the latch bolt extends from the door's edge).
For technical drawings and 3-D models, click on a part number.
Faceplate | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| For Max. Latch Bolt Projection | Ht. | Wd. | Holding Strength | DC Voltage | Material | For Door Frame Material | For Door Swing Direction | Mounting Hardware Included | Each | |
HES 9600 | ||||||||||
| 3/4" | 9" | 1 3/4" | 1,500 lbs. | 12V/24V | Dull Stainless Steel | Metal, Wood | Left, Right | Yes | 0000000 | 0000000 |
Universal Electric Door Strike Plates
These versatile strike plates are for use with door handles and knobs, pry-resistant door handles and knobs, and pry-resistant crossbars. They regulate access to doors by holding or releasing a lock's latch with a signal from a push-button switch, keypad control, or card reader. All of these strike plates must be hardwired. They meet UL 1034 for burglary resistance.
When replacing an electric strike plate, first select one that will work with your lock type so that the latch will align properly with the plate. Next, choose a strike plate that can accommodate your latch bolt projection (how far the latch bolt extends from the door's edge). Then, match the size of the strike plate to your door frame cutout. If you don't find an exact match, choose a strike plate with a smaller size than your cutout.
For technical drawings and 3-D models, click on a part number.
For Cutout | Faceplate | Voltage | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Max. Latch Bolt Projection | Ht. | Wd. | Dp. | Ht. | Wd. | Holding Strength | AC | DC | Material | For Door Frame Material | For Door Swing Direction | Mounting Hardware Included | Each | |
Rutherford F2 | ||||||||||||||
| 3/4" | 3 1/4" | 1 5/8" | 1 5/8" | 4 37/64" | 1 1/4" | 1,500 lbs. | 12V-24V | 12V/24V | Dull Stainless Steel | Metal, Wood | Left, Right | Yes | 000000 | 0000000 |
HES 1600 | ||||||||||||||
| 1 11/16" | 3 1/4" | 1 5/8" | 1 3/8" | 4 7/8" | 1 1/4" | 1,500 lbs. | 12V-24V | 12V/24V | Dull Stainless Steel | Metal, Wood | Left, Right | Yes | 00000000 | 000000 |
Electric Door Strike Plates for Surface Mounted Locks
If your lock latches to a mechanism that's mounted to the door's surface instead of in the door jamb, select this strike plate. It regulates access to doors by holding or releasing a lock's latch with a signal from a push-button switch, keypad control, or card reader. Strike plates must be hardwired.
When replacing an electric strike plate, first select one that will work with your lock type so that the latch will align properly with the plate. Next, choose a strike plate that can accommodate your latch bolt projection (how far the latch bolt extends from the door's edge). Then, match the size of the strike plate to your door frame cutout. If you don't find an exact match, choose a strike plate with a smaller size than your cutout.
For technical drawings and 3-D models, click on a part number.
For Cutout | Voltage | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Max. Latch Bolt Projection | Ht. | Wd. | Dp. | Holding Strength | AC | DC | Finish | For Door Frame Material | For Door Swing Direction | Mounting Hardware Included | Each | |
Trine 00 | ||||||||||||
| 5/8" | 2 1/8" | 1 3/16" | 3 5/16" | 1,000 lbs. | 8V-16V | 4V-6V | Dull Brass | Metal, Wood | Left, Right | Yes | 0000000 | 0000000 |
Strikes for Deadbolt Cabinet Door and Drawer Locks
This strike fits most deadbolt-style locks. Mount it on the right or left side of a cabinet door or drawer.
For technical drawings and 3-D models, click on a part number.
Overall | Slot | Mounting | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Lg. | Wd. | Thick. | Lg. | Wd. | Fasteners Included | Screw Size | Mounting Hole Dia. | For Use On | Each | |
Steel—Dull | ||||||||||
| 4" | 2 13/16" | 1/16" | 3 3/8" | 1/4" | No | No. 6 | 3/16" | Wood | 0000000 | 00000 |
Padlock Brackets for Cam Locks and Latches
For extra security, these brackets mount to a cam lock or latch without a handle so you can add a padlock. Make sure your bracket has the same For Through Hole Diameter as your lock or latch to ensure a good fit. These brackets won’t work with locks and latches that are flush with their mounting surface.
For technical drawings and 3-D models, click on a part number.