We will reply to your message within an hour.
Use these latches with three-point locking systems, such as those on filing cabinet doors.
Also known as compression cam latches, turn the handle a quarter-turn to latch, then another quarter-turn to draw the cam firmly against the door or drawer surface.
Also known as compression cam latches, these reach full compression when you lift the handle, turn it a quarter-turn, and then push it down for a secure hold.
The mounting screws on these latches are concealed to prevent tampering.
Designed for food-processing and hygienic applications, these corrosion-resistant latches are FDA compliant for direct food contact and DGUV tested to meet European regulations for use with food.
These latches are IP65 rated for protection against dust, dirt, and low-pressure washdowns.
These latches have a spring-wire cam that slips under a receiving catch on a cabinet body to create tension and hold cabinet doors and drawers closed.
Use these latches in a 3/4" dia. through hole, which is the most common through-hole size.
Designed for use in 1/2" dia. through holes.
These latches are IP65 rated for protection against dust, dirt, and washdowns.
Press the button and the handle snaps open; push the handle shut for a secure hold.
These tight-hold latches are IP65 and NEMA 4 rated for protection against dust, dirt, and washdowns. Press the button and the handle snaps open; push the handle shut for a secure hold.
Fold the ring handle into the recess to stay out of the way when not in use.
With a flat inset grip, the handle is recessed to stay out of the way.
Raise the handle and it swings smoothly for easy latching and unlatching.
With a finger-grip knob, these latches fit where latches with handles won't.
Also known as adjustable compression cam latches, these adjust to compensate for door or drawer misalignment.
Use these locks in a 3/4" dia. through hole, which is the most common through-hole size.
Designed for use in 1/4" or 1/2" dia. through holes.
Also known as compression cam locks, turn the head a quarter-turn to latch, then another quarter-turn to draw the cam firmly against the door or drawer surface.
For protection against dust, dirt, and washdowns, these locks are IP65 rated.
Also known as adjustable compression cam locks, these adjust to compensate for door or drawer misalignment.
These locks have a spring-wire cam that slips under a receiving catch on a cabinet body to create tension and hold cabinet doors and drawers closed.
Meet U.S. postal service guidelines for mailbox locks.
Made of plastic, these locks are suitable for damp and humid environments.
These highly pick-resistant locks have specially designed half-moon keys that cannot be duplicated.
These locks are IP65 and NEMA 4 rated for protection against dust, dirt, and washdowns.
A stainless steel shutter blocks rain, snow, and dirt from entering the cylinder where they can cause internal damage.
Also known as compression cam locks, turn the handle a quarter-turn to latch, then another quarter-turn to draw the cam firmly against the door or drawer surface.
To prevent internal damage, these locks have a stainless steel shutter that blocks rain, snow, and dirt from entering the cylinder.
These locks open with their own unique key as well as a master key.
These sets come with four cam locks that are divided into two groups of two. Each group of cam locks opens with a specific key number. All open with the same master key.
Offering more security than standard master keyed cam locks, these have circular keys that are difficult to duplicate.
Choose these locks to use your own compatible lock cylinder to match the keying of an existing system.
Without a keyway, you don't have to worry about these magnetic locks being picked or memorizing combinations. They are water-tight, so they resist snow, dirt, and other contaminants.
A red indicator on the lock face is visible when unlocked and hidden when locked.
Designed for food-processing and hygienic applications, these corrosion-resistant cam locks are made of FDA listed materials.
These locks require a hex key to open.
Choose these locks if you need to open several with the same key.
The mounting screws on these locks are concealed to prevent tampering.
These locks are IP65 rated for protection against dust, dirt, and washdowns.
In addition to an IP65 rating for low-pressure washdown environments, these locks have a squeeze-release handle to prevent accidental opening when unlocked.
Open these locks with both a master key and their own unique key.
Choose these locks if you need each one to open with a different key.
Open multiple locks with the same key.
A master key opens all of these locks, which also have their own unique keys.
Open each of these locks with a different key.
With a molded inset grip, the handle remains recessed to stay out of the way.
Also known as compression cam locks, these reach full compression when you lift the handle, turn it a quarter-turn, and then push it down for a secure hold.
These tight-hold locks are IP65 and NEMA 4 rated for protection against dust, dirt, and washdowns. Press the button and the handle snaps open; push the handle shut for a secure hold.
With an extra long shaft, these latches are good for use with thick, heavy doors, such as those found on trucks and large cabinets.
Designed for protection against dust, dirt, and washdowns, these padlockable latches are IP65 rated.
These padlockable latches are IP65 rated for protection against dust, dirt, and low-pressure washdowns.
Secure these latches with a padlock.
Latch and lock doors and cabinets these swing-handle cam locks, and unlock them with a four-number combination code.
Similar to locks on a hotel safe, each user sets a new combination.
Set a combination and reset it at any time.
Each latch has top and bottom spring-loaded balls that can grab the strike plate from different directions.
Also known as bullet catches, these latches have a spring-loaded ball that grabs and holds the strike plate to keep doors shut.
These latches are adjustable; push the ball in and rotate it to adjust force as well as compensate for misalignment.
A catch grabs and holds the strike plate to keep doors shut.
Their spring-loaded design withstands vibration, rattling, and shaking better than other push-to-close grab latches for a more secure hold.
An electrical switch allows these latches to power a light or other signal to indicate whether a door is open or closed.
Turn the screw on the latch to adjust the gripping force on the strike plate.
Close and open these grab latches with a push—there's no need for a handle.
Magnetic force holds doors closed.
Made to NSF/ANSI standards, these latches have a completely sealed magnet to eliminate crevices that can trap food particles.
To keep your environments free of contaminants, the magnet is encapsulated so it won't release particles when it meets the strike plate.
These latches withstand temperatures up to 480° or 570° F.
Close and open these magnetic latches with a push—there's no need for a handle.
Doors stay closed with the pressure of rollers against the strike plate.
These latches are spring-loaded to overcome resistance caused by gaskets and air pressure to close doors tightly.
To prevent doors from slamming, these latches are hydraulic.
There's no need for a mating strike plate for these latches—their spring-loaded arm snaps to engage when closing the door.
Close and open these roller latches with a push—there's no need for a handle.
These latches snap together to secure doors. They have a return spring to snap tight with a push and release with a pull.
Push in the knob to open these latches.
When not in use, push the knob in so it's flush and out of the way; it pops out with a touch.
Also known as paddle latches, these are often used on electrical panels, cabinets, and lockers.
Their spring-loaded design withstands vibration, rattling, and shaking better than other face-mount push-to-close latches for a more secure hold.
Keep doors on refrigerators and industrial enclosures closed.
For use on spray booths and drying ovens, these latches automatically open when the internal pressure of the enclosure reaches a set level.
When released, the spring-loaded ring handle returns to its recessed position to stay out of the way.
Also known as paddle locks, these are often used on electrical panels, cabinets, and lockers.
Attach these locks vertically to the side edge of doors on refrigerators and industrial enclosures with the strike plate mounted behind them on the frame.
An emergency release handle offers a means of escape if the door closes with someone inside an enclosure. Mount these locks horizontally to the face of doors on refrigerators and industrial enclosures with the strike plate mounted on the frame.
Mount these locks horizontally to the face of doors on refrigerators and industrial enclosures with the strike plate mounted on the frame.
To open, push in the knob and pull the tab.
Attach these padlockable latches vertically to the side edge of doors on refrigerators, ovens, and industrial enclosures with the strike plate mounted behind it on the frame.
Mount these padlockable latches horizontally to the face of doors on refrigerators, ovens, and industrial enclosures with the strike plate mounted on the frame.
An emergency release handle offers a means of escape if a door closes with someone inside an enclosure.
Operate these padlockable latches from either side of the door—there is a handle on both sides.
The low profile means less of the lock is exposed, reducing the potential for damage.
Push the bolt into the strike plate to secure doors, gates, and cabinets.
No hands needed—step on the top cap to latch the bolt; retract it by pressing the side release button.
Also known as cane bolts, these latches have the added height that's needed to bridge large vertical gaps. Install them at the top or bottom of swinging doors and gates to hold them in an open or closed position.
Slide the bolt and drop the knob into the notch to secure.
A large handle makes gripping these latches easier than other lift-and-drop barrel slide-bolt latches.
Bolts are spring-loaded to stay latched until you activate the pull.
Pull the chain-grip to unlatch hard-to-reach doors and panels.
The strike has angled ends so these latches can accept their bolt even when doors become misaligned.
These padlockable latches are often used on 2" and 3" track to keep garage and other sectional overhead doors closed.
These padlockable latches are reversible for right- and left-hand mounting.
The mounting screws on these padlockable latches are concealed to prevent tampering.
These padlockable latches have the added width that's needed to bridge large horizontal gaps. They are often used on double-door gates to hold them in an open or closed position.
A large handle makes gripping these latches easier than other lift-and-drop barrel padlockable slide-bolt latches.
Slide the bolt and drop the knob into the notch to hold, then secure with a padlock.
Choose these locks if you need locks that each open with a different key.
Choose these locks if you need several locks that open with the same key.
A red indicator on the side of these locks is visible when they are open and hidden when they are locked.
To ensure the correct fit on your drawer, these locks include two latch bolts.
Thicker bodies and longer bolts resist prying to provide more security than other deadbolt cabinet door locks.
Open each of these drawer locks with a different key.
With thicker bodies and longer bolts, these locks resist prying to provide more security than other keyed alike deadbolt cabinet door locks.
Choose these locks if you need to lock multiple drawers with the same key.
These drawer locks open with their own keys and with a master key.
To provide more security than other master keyed deadbolt cabinet door locks, these locks have thicker bodies and longer bolts to resist prying.
These strikes fit most deadbolt-style locks.
Open multiple cabinet locks with the same key.
Each of these cabinet locks opens with its own key.
Open multiple cabinet locks with their own keys, as well as with a master key.
These latches reach around outside corners to draw two surfaces together—use them to secure cases, toolboxes, and other containers.
These latches use downward compression to pull surfaces together for sealing gasketed doors.
A safety catch prevents accidental opening.
To prevent accidental opening, these latches have a safety catch.
A plastic-coated handle and hook prevents the release of particles from metal-to-metal contact, which makes these latches good for clean room applications.
Designed with compression springs to withstand vibration better than standard draw latches, these offer a more secure hold.
These latches are typically used to secure hoods and covers.
Mount these latches on a corner to draw perpendicular surfaces together.
An integrated slide bolt extends into the strike plate to resist pull and vibration from side-to-side, front-to-back, and up-and-down forces.
The latch arm is coated with vinyl so it won't scratch surfaces.
No need for a strike plate, these latches hook into a lip or notch.
Adjust the latching distance for a tight fit over gasketing and to compensate for misalignment.
These latches have a safety catch to prevent accidental opening.
These latches hook into a lip or notch and have an adjustable latching distance to compensate for gasketing and misalignment.
Each latch comes with a variety of strike plates for different mounting options.
Use these L-handle latches to draw lightweight surfaces together.
Draw lightweight surfaces together with these latches.
Lift and turn the handle 180° to open and close these latches.
With a spring-loaded handle, these hold tighter than other turn-to-open draw latches and compensate for slight misalignment.
Use a 5/16" hex key to open and close these latches.
These latches snap in place to eliminate rattling and hold access doors, screens, windows, and panels.
To secure overlapping components, pull the slide over the stud until they snap together. These latches resist shock and vibration.
Add a padlock to secure these latches, which reach around corners to pull two surfaces together.
For use on gasketed doors, these latches use downward compression to pull surfaces together. They have a safety catch to prevent accidental opening.
Mount these latches on a corner to draw perpendicular surfaces together. They have a safety catch to prevent accidental opening.
Secure surfaces together with these padlockable latches; built-in springs withstand vibration better than other latches.
Adjust the latching distance to compensate for gasketing and misalignment.
Lift and turn the handle 180° to open and close these latches. Add a padlock to secure.
Secure cases, toolboxes, and other containers—these locks reach around outside corners to draw two surfaces together.
For use on gasketed doors, these latches use downward compression to pull surfaces together.
Lift and turn the handle 180° to open and close this lock.
Open several draw locks with the same key.
A paddle handle activates the top and bottom spring-loaded latching points to secure large cabinet doors.
Use these latches alone for single-point latching, or add latch kits for more holding power.
Choose these locks if you need several that open with the same key.
Use these latches alone for single-point latching or add latch kits for multiple-point latching and extra holding power.
Choose these L-handle locks if you need several that open with the same key.
The ring handle is recessed to stay out of the way when not in use. Latches arrive ready for single-point latching. For more holding power, add a latch kit for two-point latching, or add two latch kits for three-point latching.
Choose these keyed alike locks when you need several that open with the same key.
Side, top, and bottom latching points secure large, heavy doors that are subject to strenuous use, such as those on trucks and large access doors.
Choose these keyed alike locks if you need several that open with the same key.
Designed to stand up to heavy use, these latches are often seen on refrigerators and truck doors.
These latches are reversible for right- and left-hand mounting.
In addition to being padlockable, these heavy duty latches come with two handles for access from the inside as well as the outside. They are often used on refrigerators and truck doors.
Tighten the screw on the strike plate to secure the bar and prevent accidental unlatching.
Latches snap shut when you push the bar in the strike plate to prevent accidental unlatching. Press the button on the strike plate to release the bar.
To prevent accidental unlatching due to vibration, there's a bushing in the eye.
Turn the padlock eye to fasten these hasps without a padlock.
Install these hasps over a cam lock and secure them with a padlock to increase security on cabinets and chests.
Mount these padlockable eyes to the front of a door and door frame.
Mount these padlockable eyes on the inside edge of a door and door frame.
Mount these hasps around complex curves, angles, and corners that other corner hasps can't reach.
Designed for use with cut-resistant padlocks, these hasps have a padlock shackle protector on the strike plate for added cut and pry resistance.
Choose this hasp if you need several hasps that open with the same key.
Choose these hasps if you need hasps that each open with a different key.
Also known as rotary latches, these compensate for door misalignment when closing and then firmly grip the strike bolt for a secure hold.
Turn the handle to keep doors, drawers, and hatches closed.
Hold doors, drawers, and hatches closed with the turn of a handle.
Twist these latches to hold small lightweight doors and panels closed.
Choose these cylinders if you need cylinders that each open with a different key.
Choose these cylinders if you need several cylinders that open with the same key.
Choose these cylinders if you need cylinders that each open with a different key and also open with a master key.
This lock has a latch bolt to secure doors in the closed position.
Designed to withstand vandalism better than other deadbolt locks for double doors, these mortise mount into a cutout in the doors.
Use the same key to lock and unlock multiple deadbolts, or use the turnpiece on the inside to open the door.
A guard over the latch prevents tampering.
Lock and unlock the deadbolt with a turnpiece on the inside and a key on the outside. These locks each have different keys.
Often used on restroom doors, a message on the outside of the door changes when the lock is engaged or disengaged. Locks open with a turnpiece inside and an emergency access tool outside.
Enter a combination and turn the turnpiece to unlock these locks from the outside; turn the inside or outside turnpiece to manually relock them.
Enter a combination and turn the turnpiece to unlock these locks from the outside; they automatically lock when you close the door.
Gain access from the outside with a combination or an included key. These automatically lock when you close the door.
Also known as passage handles, these do not lock.
In addition to lasting twice as long as standard door handles, these mortise mount into a cutout in the door to withstand vandalism.
For frequently used doors, these handles last twice as long as standard door handles.
For frequently used doors, these knobs last twice as long as standard door knobs.
Also known as passage knobs, these knobs do not lock.
In addition to lasting twice as long as standard door knobs, these are made entirely of corrosion-resistant materials to stand up to washdown and marine environments.
Lock and unlock the outside of these handles with their own unique keys. The inside handle can always open the door.
In addition to lasting twice as long as standard key-locking door handles, these mortise mount into a cutout in the door to withstand vandalism.
For frequently used doors, these handles last twice as long as standard key-locking door handles.
Key and replace lock cores without dismantling the entire door handle. Also known as interchangeable-core handles.
Install your own compatible lock cylinders in these handles. The inside handle opens the door whether or not it is locked.
For frequently used doors, these handles last twice as long as standard key-locking door handles without lock cylinders.
Lock and unlock the outside handle with both a master key and a unique door key. The inside handle can always open the door.
For frequently used doors, these handles last twice as long as standard master keyed key-locking door handles.
The locks on these handles open with the same key. They can open from the inside handle whether locked or unlocked.
For frequently used doors, these handles last twice as long as standard keyed alike key-locking door handles.
For frequently used doors, these knobs last twice as long as standard key-locking door knobs.
These knobs can always be opened from the inside, while the locks on the outside each open with a different key.
In addition to lasting twice as long as standard key-locking door knobs, these are made entirely of corrosion-resistant materials to stand up to washdown and marine environments.
Lock and unlock each of these knobs with the same key. The inside knob can always open the door.
Install your own compatible lock cylinder to lock these knobs from the outside. The inside knob can always open the door.
These knobs open with a master key and their own keys. The inside knob opens the door whether it is locked or unlocked.
The easy-to-read backlit screen turns on when touched and enters sleep mode when inactive to conserve battery life. Open the outside handle with a combination or the included key; the inside handle is always unlocked.
Open the outside handle with a combination or the included key; the inside handle is always unlocked.
To gain access from the outside with a key as well as a combination, these handles accept an easy-change lock cylinder. The inside handle is always unlocked.
Gain access from the outside with a combination; the inside handle is always unlocked.
Unlock the outside knob with a combination; the inside knob is always unlocked.
These handles accept optional HID-compatible proximity cards or key fobs to regulate access for up to 2,000 employees. They are programmable so you can assign different combinations to different people and restrict access when necessary.
The movement of the lever from opening and closing the door generates the power these handles need. They are programmable so you can assign different combinations to different people and restrict access when necessary.
In addition to lasting twice as long as standard self-locking door handles, these mortise mount into a cutout in the door to withstand vandalism.
The outside of these handles is always locked, and can be unlocked with a unique key. The inside handle can always open the door.
For frequently used doors, these handles last twice as long as standard self-locking door handles.
Use the same key to open multiple handles. The outside handle is always locked, and the inside handle can always open the door.
For frequently used doors, these handles last twice as long as standard keyed alike self-locking door handles.
Use any compatible lock cylinder with these handles. The outside handle is always locked, but you can open the door from the inside.
For frequently used doors, these handles last twice as long as standard self-locking door handles without lock cylinders.
For frequently used doors, these handles last twice as long as standard master keyed self-locking door handles.
These handles are always locked from the outside, but open with a master key and their own keys.
For frequently used doors, these knobs last twice as long as standard self-locking door knobs.
Each of these knobs opens with its own key. The outside handle is always locked, but you can open the door from inside.
These knobs are always locked from the outside. Unlock multiple knobs with the same key, or turn the inside knob to open.
Install a compatible lock cylinder to keep these knobs locked from the outside. You can always open them with the inside knob.
Unlock these knobs with a master key and a key unique to that door. They are always locked from the outside, but doors can be opened from the inside knob.
Lock and unlock these handles with a button on the inside or a key on the outside. Handles each open with a different key.
For frequently used doors, these handles last twice as long as standard key- and button-locking door handles.
Choose these handles if you want to use your own compatible lock cylinders.
For frequently used doors, these handles last twice as long as standard key- and button-locking door handles without lock cylinders.
These handles lock and unlock with a button on the inside or a key on the outside; they all share the same key.
For frequently used doors, these handles last twice as long as standard keyed alike key-and button-locking door handles.
Unlock these handles with a shared master key and a key unique to that door; they lock with a button on the inside handle.
For frequently used doors, these handles last twice as long as standard master keyed key- and button-locking door handles.
For frequently used doors, these knobs last twice as long as standard key- and button-locking door knobs.
These knobs lock and unlock with a button on the inside or their own unique keys.
Choose these knobs if you want to use your own compatible lock cylinders.
Choose these knobs if you need to open multiple doors with the same key. They also lock and unlock with a button on the inside.
Open these knobs with both a shared master key and key unique to that door, or use the button on the inside.
Lock the outside handle with the button on the inside handle.
For frequently used doors, these handles last twice as long as standard button-locking door handles.
For frequently used doors, these knobs last twice as long as standard button-locking door knobs.
Lock the outside knob with the button on the inside knob.
In addition to lasting twice as long as button-locking door knobs, these are made entirely of corrosion-resistant materials to stand up to washdown and marine environments.
Temporarily secure doors while repairing or replacing a handle.
These handles can lock with a button from the inside.
These knobs can lock with a button from the inside.
Often used on emergency exits, touch bars open doors with a push.
Made of 304 stainless steel, these touch bars stand up to corrosive environments.
Rugged construction withstands impact from carts, dollies, and other equipment.
An alarm sounds when these touch bars are pushed to open doors.
This touch bar is UL Listed for use with three-hour fire doors
Crossbars open doors with a push and are often used on emergency exits.
Able to withstand vandalism better than other crossbars, these mortise mount into a cutout in the door.
Hold crossbars in the open position so traffic can pass freely through doorways.
A slight push or pull on the lever opens your door.
In addition to a bolt that locks your door when the alarm is armed, these levers have a latch that automatically locks the door when it's closed.
These levers have a bolt that locks your door when the alarm is armed.
Maintain security by keeping your door latched as you open it up to 3".
Designed to withstand vandalism better than other lock cylinders, these are for use in locks that are mortise mounted into a cutout in the door.
Also known as rim lock cylinders, these are for use in locks that are mounted to the door's surface.
Choose these lock cylinders if you need lock cylinders that each open with a different key.
Choose these lock cylinders if you want individual lock cylinders or groups of lock cylinders that open with their own key, but also open with a master key.
Choose these lock cylinders if you need several lock cylinders that open with the same key.
For use alone or as part of an access-control system, these locks use electromagnetic force to hold single doors closed.
These locks use electromagnetic force to hold double doors closed, often as part of an access-control system.
Change your lock's pins so you can open it with a different key.
In addition to sliding gates, these locks are for use on cantilever and fixed-roller gates.
With a key-locking mechanism, these locks provide more security than other gate locks.
Push to close and pull up on the latch arm to open these padlockable latches.
Secure swinging doors in wire and chain link partitions.
Safeguard sliding doors in wire and chain link partitions.
A hidden push-button release on the bottom of these latches retracts the latch bolt; this discourages unwanted entry but allows access to those who know it’s there.
For use alone or as part of an access-control system, these locks use magnets to hold gates closed.
Slide these latches into the strike plate to secure bathroom doors.
Hold bathroom doors closed by swinging these latches into a notch in the strike plate.
These concealed latches snap together—no mounting fasteners required.
Add these bars to drawer cabinets without a lock and secure with a padlock.
These locking bars have hinges and swing out of the way for easy access to cabinet drawers.
Choose these locking bars if you need several bars that open with the same key.
Choose these locking bars if you need bars that each open with a different key.
For security, choose a combination from over 2,000 possible five-number combinations.
Choose these locks if you need locks that each open with a different key and also open with a master key.
With these locks, users can select any locker that's not being used, create their own combination, and secure their items. Once they open the lock, it automatically resets for the next user.
Close the locker door and turn the dial to lock.
These locks automatically lock when the locker door is closed.
Secure doors and windows made of T-slotted framing to protect valuables or restrict access for safety.
A magnet holds the door open; pull on the door to release.
Latch your door to the wall for a secure hold.
Push your door open to automatically engage the holder; pull on the door to release.
For use with doors that already have a closer, these holders keep doors open with an electromagnet. When activated by a fire alarm, the magnet shuts off and releases the door.
Step on the spring-operated plunger to hold your door in place; tap on the release lever to free it.
Flip holders down to keep doors open; flip up to release.
Open and lock your enclosure door into place so it won’t close while you’re working inside the enclosure.
Latch your door to the floor for a secure hold.
These three-way holders can be inserted under the door, over the top corner of the door, or over the hinge pin to hold a door open.
Place one of these wire springs onto your door's hinge pin to keep it open.
Hold doors open within the 85° to 110° range without adding clutter to your floor or walls.
Commonly used on semi-trailer doors, these holders have a long hook that secures heavy doors in the open position.
Replace rusty or broken hardware on your toilet partitions without needing to buy the entire component.
Design your own partitions, add to your existing partition, or replace individual components and hardware.