McMaster-Carr logo
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Comments
    E-mail address (if you would like a response)
    37 Products

    Access Control Cable

    Wire multiple components in your security system using a single cable. This cable bundles together four color-coded cables that correspond to each part of an access point: the card reader, the door contact, the lock, and the exit sign. Each interior cable is labeled with the component it matches. All four interior cables have a layer of foil around them to prevent signal interference from nearby devices. Designated CMP, it has a flame-resistant, low-smoke insulation and can be used without conduit in duct work and above a drop ceiling. It’s also known as plenum cable. It’s rated FT6, so it meets requirements for preventing the spread of flames and smoke based on a timed test with material mounted to a horizontal tray.
    Shielded Stranded Wire
    Image of Product. Front orientation. Security Cable. Access Control Cable.
    Outer
    Jacket
    Inner
    Insulation
    Security Cable
    Use
    AWG
    No. of
    Wires
    Cable
    AWG
    Current @
    Temp.
    OD
    Material
    Color
    Material
    Color
    Temp. Range,
    ° F
    Cable
    Designation
    Flammability Rating
    25 ft.
    Long
    50 ft.
    Long
    100 ft.
    Long
    200 ft.
    Long
    300V AC/300V DC
    Card Reader
    Door Contact
    Exit Sign
    Lock
    22
    22
    22
    18
    6
    2
    4
    4
    22/6
    22/2
    22/4
    18/4
    2.2 amp @ 86° F
    2.2 amp @ 86° F
    2.2 amp @ 86° F
    4 amp @ 86° F
    0.46"PVC
    YellowPVC
    Blue, Gray, Orange, White32 to 165CMP
    CSA C22.2 No. 0.3 FT65846N150000000000000000000000000000
     

    Keypad Door Controls

    Image of Product. Front orientation. Keypad Door Controls.
    Enter a combination to operate electromagnetic locks, electric door strikes, and other access control devices. This control can also be used with alarm systems and motion detectors.
    Ht.
    Wd.
    Dp.
    Combination Format
    Voltage Range
    Material
    For Use
    Outdoors
    Mounting Hardware
    Included
    Each
    Linear 212I
    4 1/2"2 3/4"1 1/4"Four Numbers, Five Numbers, Six Numbers, Seven Numbers, Eight Numbers12V AC to 24V AC, 12V DC to 24V DCStainless Steel
    NoYes8056A480000000
     

    Electric Door Strike Plates for Door Handles and Knobs

    Image of Product. Front orientation. Electric Door Strike Plates. Electric Door Strike Plates for Door Handles and Knobs, ROFU 1509.
    Image of Product. Front orientation. Electric Door Strike Plates. Electric Door Strike Plates for Door Handles and Knobs, ROFU 1510.
    Image of Product. Front orientation. Electric Door Strike Plates. Electric Door Strike Plates for Door Handles and Knobs, Rutherford S65.
    Image of Product. Front orientation. Electric Door Strike Plates. Electric Door Strike Plates for Door Handles and Knobs, Von Duprin 5100.

    ROFU 1509

    ROFU

    1510

    Rutherford

    S65

    Von

    Duprin

    5100

    All of these strike plates can be used with door handles and knobs. Use them all to regulate access to doors by holding or releasing a lock's latch with a signal from a push-button switch, keypad control, or card reader. Strike plates must be hardwired.
    When replacing an electric strike plate, first select one that will work with your lock type so that the latch will align properly with the plate. Next, choose a strike plate that can accommodate your latch bolt projection (how far the latch bolt extends from the door's edge). Then, match the size of the strike plate to your door frame cutout. If you don't find an exact match, choose a strike plate with a smaller size than your cutout.
    ROFU 1510—The ROFU 1510 strike plate can also be used with pry-resistant door handles and knobs.
    Rutherford S65—The Rutherford S65 strike plate can also be used with pry-resistant door handles and knobs.
    UL 1034—Rutherford and Von Duprin strike plates meet UL 1034 for burglary resistance.
    For
    Cutout
    Faceplate
    Voltage
    For Max. Latch
    Bolt Projection
    Ht.
    Wd.
    Dp.
    Ht.
    Wd.
    Holding Strength,
    lbf
    AC Voltage,
    V AC
    DC Voltage,
    V DC
    For Door Frame
    Material
    For Door Swing
    Direction
    Mounting Hardware
    Included
    Appearance
    Finish
    Color
    Specs.
    Met
    Each
    ROFU 1509
    5/8"3 1/2"1"1 1/8"7 15/16"1 7/16"1,0008 to 163 to 6Metal, WoodLeft, RightYesDullAluminum Coated1552A280000000
     
    ROFU 1510
    11/16"2 15/16"13/16"1 1/2"5 7/8"1 1/4"8008 to 16WoodLeft, RightYesSatinChrome1552A25000000
     
    Rutherford S65
    3/4"3 3/8"5/8"1 3/16"4 7/8"1 1/4"1,00012 to 2412/24Metal, WoodLeft, RightYesDullUL 10348064A31000000
     
    Von Duprin 5100
    1/2"3 3/8"1"1 3/8"4 7/8"1 1/4"1,00012/24Metal, WoodLeft, RightYesDullDark BrownUL 10341497A4000000
    1/2"3 3/8"1"1 3/8"4 7/8"1 1/4"1,00012/24Metal, WoodLeft, RightYesDullAluminum CoatedUL 10341497A2000000
     
    Accessories for Electric Door Strike Plates

    Electronic Remote-Release Rotary Latches

    Open your door with a card reader or other access control device. In case of emergency, these latches have a lever to manually open your door. You can also connect a cable, rod, or handle (not included) to operate these latches remotely in areas with obstructions. To close these latches, push them in, and they firmly grip the strike bolt or plate on your door to hold it shut. Also known as single-stage rotary latches, they only have one latching position to keep them closed. Push them hard to make sure they don’t accidentally open.
    Rotary Latches
    Image of Product. Front orientation. Rotary Latches. Electronic Remote-Release Rotary Latches, 1 Latch Point, Manual-Release Lever.
    Image of Product. Front orientation. Rotary Latches. Electronic Remote-Release Rotary Latches, 1 Latch Point, Manual-Release Lever, Switch.

    1 Latch Point,

    Manual-Release

    Lever

    1 Latch Point

    Manual-Release Lever

    Switch

    Switch—Latches with a switch can trigger a light, alarm, or other device to let you know when the latch is open or closed. Closing the door resets the switch.
    Strike Plate
    Electrical
    Connection
    Max. Pull
    Strength, lbf
    Lever
    Location
    No. of Latch
    Points
    Lg.
    Wd.
    Dp.
    Max. Latching
    Distance
    Dia.
    Lg.
    Wd.
    Projection
    Voltage,
    V DC
    Current,
    mA
    Features
    Each
    Black Painted Steel
     
    Left-Side Door Mount/Right-Side Door Mount
    Molex Mini-Fit200Side11 13/16"2 3/8"1/2"1"1/8"1 3/8"3/4"1", 1 1/8"123,000Manual-Release Lever5136N23000000
    Molex Mini-Fit500Side12 7/8"2 5/16"1/2"1 7/16"1/8"1 3/8"3/4"1", 1 1/8"123,000Manual-Release Lever5136N2500000
    Molex Mini-Fit500Side12 7/8"2 5/16"1/2"1 7/16"1/8"1 3/8"3/4"1", 1 1/8"123,000Manual-Release Lever, Switch5136N2700000
    Wire Leads200Side11 13/16"2 3/8"1/2"1"1/8"1 3/8"3/4"1", 1 1/8"123,000Manual-Release Lever5136N2400000
    Wire Leads500Side12 7/8"2 5/16"1/2"1 7/16"1/8"1 3/8"3/4"1", 1 1/8"123,000Manual-Release Lever5136N2600000
    Wire Leads500Side12 7/8"2 5/16"1/2"1 7/16"1/8"1 3/8"3/4"1", 1 1/8"123,000Manual-Release Lever, Switch5136N2800000
     
    Accessories and Replacements for Rotary Latches
    Rotary Latches with Bluetooth Connection
    Image of Product. Front orientation. Rotary Latches. Electronic Remote-Release Rotary Latches, Rotary Latches with Bluetooth Connection.
    Image of Product. Front orientation. Latch Strike Bolts.

    Replacement

    Latch Strike

    Bolts

    Latches with Bluetooth operate wirelessly. They have a spring-loaded plunger that pushes the door open, so you don’t have to pull it open yourself.
    Rotary Latches
    Replacement
    Latch Strike Bolts
    Strike Bolt
    Electrical
    Connection
    Max. Pull
    Strength, lbf
    Lever
    Location
    No. of Latch
    Points
    Lg.
    Wd.
    Dp.
    Max. Latching
    Distance
    Dia.
    Lg.
    Projection
    Thread
    Size
    Voltage,
    V DC
    Current,
    mA
    Features
    Each
    Each
    Zinc-Plated Steel (Dull)
     
    Left-Side Door Mount/Right-Side Door Mount
    Molex Micro-Fit 3.01,000Bottom12 9/16"2 11/16"11/16"9/16"3/8"1 1/2"1"5/16"-18
    12250Manual-Release Lever, Spring-Loaded Plunger5136N3200000005164N1600000
    Molex Micro-Fit 3.01,000Side12 9/16"2 11/16"11/16"9/16"3/8"1 1/2"1"5/16"-18
    12250Manual-Release Lever, Spring-Loaded Plunger5136N310000005164N160000
     
    Accessories for Rotary Latches

    Low-Current Panel-Mount Transformers

    Image of Product. Front orientation. Transformers. Low-Current Panel-Mount Transformers.
    Hardwire this transformer into your panel. Use it to power low-voltage devices such as alarms and sensors.
    Cannot Be Sold to California—Transformer cannot be sold to California due to local energy efficiency requirements.
    Input Voltage,
    V AC
    Output Voltage (Power Output)
    Ht.
    Wd.
    Dp.
    Cannot Be
    Sold To
    Each
    Single Phase—Wire Leads Input Connection and Screw-Terminal Output Connection
     
    Step-Down Voltage
    1208V AC (20 VA), 16V AC (30 VA), 24V AC (30 VA)2.2"2.3"2.9"California1373A96000000
     

    Weather-Resistant Keypad Door Controls

    Image of Product. Front orientation. Keypad Door Controls. Weather-Resistant Keypad Door Controls.
    Built to mount outdoors, these keypads are made of plastic. Enter a combination, use a proximity card, or key fob to operate electromagnetic locks, electric door strikes, and other access control devices.
    Ht.
    Wd.
    Dp.
    Combination
    Format
    Voltage
    Range, V DC
    Material
    For Use
    Outdoors
    Mounting Hardware
    Included
    Each
    RCI P-640-H-A
    4 5/8"3"3/4"Five Numbers5 to 16PlasticYesYes8088A520000000
     
    Key Fobs and Proximity Cards

    Universal Electric Door Strike Plates

    These versatile strike plates are for use with door handles and knobs, pry-resistant door handles and knobs, and pry-resistant crossbars. They regulate access to doors by holding or releasing a lock's latch with a signal from a push-button switch, keypad control, or card reader. All of these strike plates must be hardwired. They meet UL 1034 for burglary resistance.
    When replacing an electric strike plate, first select one that will work with your lock type so that the latch will align properly with the plate. Next, choose a strike plate that can accommodate your latch bolt projection (how far the latch bolt extends from the door's edge). Then, match the size of the strike plate to your door frame cutout. If you don't find an exact match, choose a strike plate with a smaller size than your cutout.
    Rutherford F2
    Image of Product. Front orientation. Electric Door Strike Plates. Universal Electric Door Strike Plates.
    For
    Cutout
    Faceplate
    Voltage
    For Max. Latch
    Bolt Projection
    Ht.
    Wd.
    Dp.
    Ht.
    Wd.
    Holding Strength,
    lbf
    AC Voltage,
    V AC
    DC Voltage,
    V DC
    Material
    For Door Frame
    Material
    For Door Swing
    Direction
    Mounting Hardware
    Included
    Appearance
    Specs.
    Met
    Each
    3/4"3 1/4"1 5/8"1 5/8"4 37/64"1 1/4"1,50012 to 2412/24Stainless Steel
    Metal, WoodLeft, RightYesDullUL 10341373A10000000
    Accessories for Electric Door Strike Plates
    HES 1600
    Image of Product. Front orientation. Electric Door Strike Plates. Universal Electric Door Strike Plates.
    For
    Cutout
    Faceplate
    Voltage
    For Max. Latch
    Bolt Projection
    Ht.
    Wd.
    Dp.
    Ht.
    Wd.
    Holding Strength,
    lbf
    AC Voltage,
    V AC
    DC Voltage,
    V DC
    Material
    For Door Frame
    Material
    For Door Swing
    Direction
    Mounting Hardware
    Included
    Appearance
    Specs.
    Met
    Each
    1 11/16"3 1/4"1 5/8"1 3/8"4 7/8"1 1/4"1,50012 to 2412/24Stainless Steel
    Metal, WoodLeft, RightYesDullUL 10341373A4110000000
    Accessories for Electric Door Strike Plates

    Low-Voltage 16 mm Panel-Mount Push-Button Doorbell Switches

    Image of Product. Front orientation. Doorbell Switches. Low-Voltage 16 mm Panel-Mount Push-Button Doorbell Switches, Projecting with Hex Nut Mount.
    Image of Product. Front orientation. Doorbell Switches. Low-Voltage 16 mm Panel-Mount Push-Button Doorbell Switches, Projecting Snap In.

    Projecting with

    Hex Nut Mount

    Projecting Snap

    In

    Operate low-voltage devices such as doorbells and buzzers. These switches actuate with a quick push. Install them in a standard panel cutout diameter.
    No. of Circuits
    Controlled
    Switch Starting
    Position
    Switch
    Action
    No. of
    Terminals
    Switch
    Designation
    Actuator
    Color
    Switching Current @ Voltage
    Max. Voltage
    Dia.
    Dp. Behind
    Panel
    Each
    Metal Actuator Base with Screw-Terminal Wire Connection
     
    Projecting with Hex Nut Mount
    11 Off
    Momentary
    2SPST-NO
    Black10 amp @ 24V AC, 2 amp @ 24V DC48V AC
    48V DC
    3/4"15/16"69755K202000000
     
    Projecting Snap In
    11 Off
    Momentary
    2SPST-NO
    White3 amp @ 30V AC/30V DC30V AC
    30V DC
    3/4"13/16"69755K310000
    11 Off
    Momentary
    2SPST-NO
    Black10 amp @ 24V AC, 2 amp @ 24V DC48V AC
    48V DC
    3/4"15/16"69755K20100000
     

    Electric Door Strike Plates for Touch Bars and Crossbars

    Image of Product. Front orientation. Electric Door Strike Plates. Electric Door Strike Plates for Touch Bars and Crossbars.
    Use these strike plates with touch bars and crossbars, but not pry-resistant crossbars. They regulate access to doors by holding or releasing a lock's latch with a signal from a push-button switch, keypad control, or card reader. Strike plates must be hardwired.
    When replacing an electric strike plate, first select one that will work with your lock type so that the latch will align properly with the plate. Then, choose a strike plate that can accommodate your latch bolt projection (how far the latch bolt extends from the door's edge).
    Faceplate
    For Max. Latch
    Bolt Projection
    Ht.
    Wd.
    Holding Strength,
    lbf
    DC Voltage,
    V DC
    Material
    For Door Frame
    Material
    For Door Swing
    Direction
    Mounting Hardware
    Included
    Appearance
    Each
    HES 9600
    3/4"9"1 3/4"1,50012/24Stainless Steel
    Metal, WoodLeft, RightYesDull1373A380000000
     
    Accessories for Electric Door Strike Plates

    Electric Door Strike Plates for Surface Mounted Locks

    Image of Product. Front orientation. Electric Door Strike Plates. Electric Door Strike Plates for Surface Mounted Locks.
    If your lock latches to a mechanism that's mounted to the door's surface instead of in the door jamb, select this strike plate. It regulates access to doors by holding or releasing a lock's latch with a signal from a push-button switch, keypad control, or card reader. Strike plates must be hardwired.
    When replacing an electric strike plate, first select one that will work with your lock type so that the latch will align properly with the plate. Next, choose a strike plate that can accommodate your latch bolt projection (how far the latch bolt extends from the door's edge). Then, match the size of the strike plate to your door frame cutout. If you don't find an exact match, choose a strike plate with a smaller size than your cutout.
    For
    Cutout
    Voltage
    For Max. Latch
    Bolt Projection
    Ht.
    Wd.
    Dp.
    Holding Strength,
    lbf
    AC Voltage,
    V AC
    DC Voltage,
    V DC
    For Door Frame
    Material
    For Door Swing
    Direction
    Mounting Hardware
    Included
    Appearance
    Color
    Each
    Trine 00
    5/8"2 1/8"1 3/16"3 5/16"1,0008 to 164 to 6Metal, WoodLeft, RightYesDullBrass1552A270000000
     
    Accessories for Electric Door Strike Plates
    back to top