Roller Track for Doors
Combine track, mounting brackets, hangers, and end stops to create a system for hanging doors.
Powder-coated steel components are durable, so they resist wear and tear over time.
Door stops (not included) mount on the floor to keep sliding doors and panels from damaging walls and door frames.
For technical drawings and 3-D models, click on a part number.
Choose track based on the capacity of the door it will support.
Inside | 6 ft. | 8 ft. | 10 ft. | |||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Track Capacity, lbs. | Wd. | Ht. | Thick. | Color | Each | Each | Each | |||
Powder-Coated Steel | ||||||||||
| 400 | 1 3/4" | 2 1/4" | 0.06" | Beige | 0000000 | 000000 | 0000000 | 000000 | 0000000 | 000000 |
| 400 | 1 3/4" | 2 1/4" | 0.06" | Black | 00000000 | 00000 | 00000000 | 00000 | 00000000 | 00000 |
| 600 | 2 1/4" | 3 1/4" | 0.08" | Beige | 0000000 | 00000 | 0000000 | 000000 | 0000000 | 000000 |
| 600 | 2 1/4" | 3 1/4" | 0.08" | Black | 000000 | 00 | 000000 | 00 | 00000000 | 000000 |
| 800 | 2 5/8" | 3 1/4" | 0.09" | Beige | 0000000 | 000000 | 0000000 | 000000 | 0000000 | 000000 |
| 800 | 2 5/8" | 3 1/4" | 0.09" | Black | 000000 | 00 | 000000 | 00 | 00000000 | 000000 |
| 1,000 | 2 5/8" | 3 1/4" | 0.14" | Beige | 0000000 | 000000 | 0000000 | 000000 | 0000000 | 000000 |
| 1,000 | 2 5/8" | 3 1/4" | 0.14" | Black | 000000 | 00 | 000000 | 00 | 00000000 | 000000 |
| 5,000 | 2 13/16" | 3 3/16" | 0.15" | Beige | 0000000 | 000000 | 0000000 | 000000 | 0000000 | 000000 |
| 5,000 | 2 13/16" | 3 3/16" | 0.15" | Black | 000000 | 00 | 000000 | 00 | 00000000 | 000000 |
Ceiling-mount brackets wrap around the outside of track and mount to the ceiling to act as supports and joints. Bolt them to joists or hang them from threaded rod. Brackets are required every 2 ft. of track.
Support brackets mount the track in the desired location.
Joint brackets join two pieces of track together to create longer runs. Tabs on the top of the brackets slot into pockets in the adjoining track. Joint brackets also act as support brackets.
Suspended brackets provide clearance between your track and ceiling. The two mounting holes also provide more track stability than standard ceiling mount brackets.
Brackets with a debris cap keep dirt and debris out of the track and roller. They will not prevent the hanger from rolling off the track.
Without Debris Cap | With Debris Cap | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| For Track Capacity, lbs. | For Inside Track Wd. | Ht. | Color | Mounting Fasteners Included | Mounting Hole Dia. | Each | Each | ||
Support Brackets | |||||||||
Powder-Coated Steel | |||||||||
| 400 | 1 3/4" | 3 3/16" | Beige | No | 7/16" | 0000000 | 000000 | 0000000 | 000000 |
| 400 | 1 3/4" | 3 3/16" | Black | No | 7/16" | 00000000 | 00000 | 000000 | 00 |
| 600 | 2 1/4" | 4 9/16" | Beige | No | 9/16" | 0000000 | 00000 | 0000000 | 00000 |
| 800 | 2 5/8" | 4 3/4" | Beige | No | 9/16" | 0000000 | 00000 | 0000000 | 00000 |
| 5,000 | 2 13/16" | 6" | Beige | No | 13/16" | 00000000 | 00000 | 00000000 | 00000 |
Suspended Support Brackets | |||||||||
Powder-Coated Steel | |||||||||
| 400 | 1 3/4" | 4 1/4" | Beige | No | 7/16" | 0000000 | 00000 | 0000000 | 00000 |
Joint Brackets | |||||||||
Powder-Coated Steel | |||||||||
| 400 | 1 3/4" | 3 3/16" | Beige | No | 7/16" | 0000000 | 00000 | 000000 | 00 |
| 400 | 1 3/4" | 3 3/16" | Black | No | 7/16" | 00000000 | 00000 | 000000 | 00 |
| 600 | 2 1/4" | 4 9/16" | Beige | No | 9/16" | 0000000 | 00000 | 000000 | 00 |
| 800 | 2 5/8" | 4 3/4" | Beige | No | 9/16" | 0000000 | 00000 | 000000 | 00 |
| 1,000 | 2 5/8" | 5" | Beige | No | 11/16" | 0000000 | 00000 | 000000 | 00 |
| 5,000 | 2 13/16" | 6" | Beige | No | 13/16" | 00000000 | 00000 | 000000 | 00 |
Suspended Joint Brackets | |||||||||
Powder-Coated Steel | |||||||||
| 400 | 1 3/4" | 4 1/4" | Beige | No | 7/16" | 0000000 | 00000 | 000000 | 00 |
Wall-mount brackets wrap around the outside of track and mount to the wall to act as supports and joints. They can be mounted on any vertical surface, such as above doorways. Brackets are required every 2 ft. of track.
Support brackets are used to mount the track in the desired location. Those with a center stop provide support and a door stop at the center for bi-parting door installations.
Joint brackets join two pieces of track together to create longer runs. Tabs on the top of the brackets slot into pockets in the adjoining track. Joint brackets also act as support brackets.
Double-track brackets hold two parallel tracks for bypassing doors. Bypassing door systems are often used if there isn’t space on one side of the door to fit a full-size door.
Brackets with a debris cap keep dirt and debris out of the track and roller. They will not prevent the hanger from rolling off the track.
Without Debris Cap | With Debris Cap | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| For Track Capacity, lbs. | For Inside Track Wd. | Ht. | Color | Mounting Fasteners Included | Mounting Hole Dia. | Each | Each | ||
Support Brackets | |||||||||
Powder-Coated Steel | |||||||||
| 400 | 1 3/4" | 4 11/16" | Beige | No | 7/16" | 0000000 | 000000 | 0000000 | 000000 |
| 400 | 1 3/4" | 4 11/16" | Black | No | 7/16" | 00000000 | 00000 | 000000 | 00 |
| 600 | 2 1/4" | 7 1/16" | Beige | No | 9/16" | 0000000 | 00000 | 0000000 | 00000 |
| 600 | 2 1/4" | 7 1/16" | Black | No | 9/16" | 00000000 | 00000 | 000000 | 00 |
| 800 | 2 5/8" | 7 3/16" | Beige | No | 9/16" | 0000000 | 00000 | 0000000 | 00000 |
| 800 | 2 5/8" | 7 3/16" | Black | No | 9/16" | 00000000 | 00000 | 000000 | 00 |
| 1,000 | 2 5/8" | 7 5/16" | Beige | No | 11/16" | 0000000 | 00000 | 0000000 | 00000 |
| 1,000 | 2 5/8" | 7 5/16" | Black | No | 11/16" | 00000000 | 00000 | 000000 | 00 |
| 5,000 | 2 13/16" | 8 3/16" | Beige | No | 13/16" | 0000000 | 00000 | 0000000 | 000000 |
| 5,000 | 2 13/16" | 8 3/16" | Black | No | 13/16" | 00000000 | 00000 | 000000 | 00 |
Support Brackets with Center Stop | |||||||||
Powder-Coated Steel | |||||||||
| 400 | 1 3/4" | 7 15/16" | Beige | No | 7/16" | 00000000 | 000000 | 000000 | 00 |
| 400 | 1 3/4" | 7 15/16" | Black | No | 7/16" | 00000000 | 000000 | 000000 | 00 |
| 600 | 2 1/4" | 10 3/8" | Beige | No | 9/16" | 00000000 | 000000 | 000000 | 00 |
| 800 | 2 5/8" | 10 1/2" | Beige | No | 9/16" | 00000000 | 000000 | 000000 | 00 |
| 1,000 | 2 5/8" | 10 9/16" | Beige | No | 11/16" | 00000000 | 000000 | 000000 | 00 |
Double-Track Support Brackets | |||||||||
Powder-Coated Steel | |||||||||
| 400 | 1 3/4" | 8" | Beige | No | 7/16" | 00000000 | 00000 | 00000000 | 00000 |
| 400 | 1 3/4" | 8" | Black | No | 7/16" | 00000000 | 00000 | 000000 | 00 |
Joint Brackets | |||||||||
Powder-Coated Steel | |||||||||
| 400 | 1 3/4" | 4 11/16" | Beige | No | 7/16" | 0000000 | 00000 | 000000 | 00 |
| 400 | 1 3/4" | 4 11/16" | Black | No | 7/16" | 00000000 | 00000 | 000000 | 00 |
| 600 | 2 1/4" | 7 1/16" | Beige | No | 9/16" | 0000000 | 00000 | 000000 | 00 |
| 800 | 2 5/8" | 7 3/16" | Beige | No | 9/16" | 0000000 | 00000 | 000000 | 00 |
| 1,000 | 2 5/8" | 7 5/16" | Beige | No | 11/16" | 0000000 | 00000 | 000000 | 00 |
| 5,000 | 2 13/16" | 8 3/16" | Beige | No | 13/16" | 0000000 | 000000 | 000000 | 00 |
Double-Track Joint Brackets | |||||||||
Powder-Coated Steel | |||||||||
| 400 | 1 3/4" | 8" | Beige | No | 7/16" | 00000000 | 00000 | 000000 | 00 |
Choose a hanger that fits your inside track width. These hangers are sold individually and come with mounting plates and fasteners to attach to the door. Hangers with more rollers distribute heavy loads more evenly, giving your door more support and smoother movement. Two hangers per door are required.
Steel, stainless steel, and iron hangers adjust vertically between the bottom of the track and the top of the door.
Vertical Adjustment | Rollers | Bearing | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Inside Track Wd. | For Door Thick. | Cap. per Pair, lbs. | Ht. | Mounting Plate Ht. | Min. | Max. | No. of | Dia. | Type | Material | Color | Mounting Fasteners Included | Each | |
Powder-Coated Steel | ||||||||||||||
| 2 5/8" | 1 3/4"-2 1/4" | 800 | 14 5/16" | 7 11/16" | 1 1/4" | 2 1/2" | 2 | 3" | Roller | Steel | Beige | Yes | 0000000 | 0000000 |
| 2 5/8" | 1 3/4"-2 1/4" | 800 | 14 5/16" | 7 11/16" | 1 1/4" | 2 1/2" | 2 | 3" | Roller | Steel | Black | Yes | 00000000 | 000000 |
| 2 5/8" | 2 1/4"-3" | 800 | 14 5/16" | 7 11/16" | 1 1/4" | 2 1/2" | 2 | 3" | Roller | Steel | Beige | Yes | 0000000 | 000000 |
Roller Track Sets for Doors
These complete sets contain everything you need to create a system for hanging doors. Wall-mount support brackets can be mounted above doorways and are required every 2 ft. of track. Joint brackets attach sections of track and act as support brackets. Two hangers per door are required.
Inside | ||||||||
|---|---|---|---|---|---|---|---|---|
| Track Capacity, lbs. | For Door Thick. | Wd. | Ht. | Material | Mounting Fasteners Included | Mounting Hole Dia. | Each | |
Beige | ||||||||
6 ft. | ||||||||
| 400 | 1 1/2"-2 1/4" | 1 3/4" | 2 1/4" | Powder-Coated Steel | No | 3/8" | 0000000 | 0000000 |
12 ft. | ||||||||
| 400 | 1 1/2"-2 1/4" | 1 3/4" | 2 1/4" | Powder-Coated Steel | No | 3/8" | 0000000 | 000000 |
| 600 | 1 3/4"-2 1/4" | 2 1/4" | 3 1/4" | Powder-Coated Steel | No | 5/8" | 0000000 | 00000000 |
16 ft. | ||||||||
| 400 | 1 1/2"-2 1/4" | 1 3/4" | 2 1/4" | Powder-Coated Steel | No | 3/8" | 0000000 | 000000 |
| 600 | 1 3/4"-2 1/4" | 2 1/4" | 3 1/4" | Powder-Coated Steel | No | 5/8" | 0000000 | 00000000 |
20 ft. | ||||||||
| 400 | 1 1/2"-2 1/4" | 1 3/4" | 2 1/4" | Powder-Coated Steel | No | 3/8" | 0000000 | 000000 |
| 600 | 1 3/4"-2 1/4" | 2 1/4" | 3 1/4" | Powder-Coated Steel | No | 5/8" | 0000000 | 00000000 |
Black | ||||||||
6 ft. | ||||||||
| 400 | 1 1/2"-2 1/4" | 1 3/4" | 2 1/4" | Powder-Coated Steel | No | 3/8" | 0000000 | 000000 |
8 ft. | ||||||||
| 400 | 1 1/2"-2 1/4" | 1 3/4" | 2 1/4" | Powder-Coated Steel | No | 3/8" | 0000000 | 000000 |
| 600 | 1 3/4"-2 1/4" | 2 1/4" | 3 1/4" | Powder-Coated Steel | No | 5/8" | 0000000 | 00000000 |
| 800 | 1 3/4"-2 1/4" | 2 5/8" | 3 1/4" | Powder-Coated Steel | No | 1/2" | 0000000 | 00000000 |
10 ft. | ||||||||
| 400 | 1 1/2"-2 1/4" | 1 3/4" | 2 1/4" | Powder-Coated Steel | No | 3/8" | 0000000 | 000000 |
| 600 | 1 3/4"-2 1/4" | 2 1/4" | 3 1/4" | Powder-Coated Steel | No | 5/8" | 0000000 | 00000000 |
| 800 | 1 3/4"-2 1/4" | 2 5/8" | 3 1/4" | Powder-Coated Steel | No | 1/2" | 0000000 | 00000000 |
12 ft. | ||||||||
| 400 | 1 1/2"-2 1/4" | 1 3/4" | 2 1/4" | Powder-Coated Steel | No | 3/8" | 0000000 | 000000 |
| 600 | 1 3/4"-2 1/4" | 2 1/4" | 3 1/4" | Powder-Coated Steel | No | 5/8" | 0000000 | 00000000 |
16 ft. | ||||||||
| 400 | 1 1/2"-2 1/4" | 1 3/4" | 2 1/4" | Powder-Coated Steel | No | 3/8" | 0000000 | 000000 |
| 600 | 1 3/4"-2 1/4" | 2 1/4" | 3 1/4" | Powder-Coated Steel | No | 5/8" | 0000000 | 00000000 |
20 ft. | ||||||||
| 400 | 1 1/2"-2 1/4" | 1 3/4" | 2 1/4" | Powder-Coated Steel | No | 3/8" | 0000000 | 000000 |
| 600 | 1 3/4"-2 1/4" | 2 1/4" | 3 1/4" | Powder-Coated Steel | No | 5/8" | 0000000 | 00000000 |
| 800 | 1 3/4"-2 1/4" | 2 5/8" | 3 1/4" | Powder-Coated Steel | No | 1/2" | 0000000 | 00000000 |
Floor-Mount Track for Hanging Doors
Stop hanging doors from swaying. These tracks and guides (both sold separately) give your door a path to run along the floor for smooth, stable motion. Light spring tension keeps the guides nestled in the track, so they won't jump the track. This system is especially great for making heavy doors glide evenly, but you can also use them with bypassing and folding doors. When you use them with folding doors, the guides swivel to allow the doors to open.
Use a saw to cut the track to the length you need. You can mount the track on top of finished floors or set them into a recess to avoid creating an obstruction or tripping hazard. Secure two guides to the bottom of each door directly under the hangers on the top of the door.
For technical drawings and 3-D models, click on a part number.
| Lg. | Wd. | Ht. | Color | Mounting Fasteners Included | Mounting Hole Dia. | No. of Mounting Holes | Pkg. Qty. | Pkg. | |
Powder-Coated Steel | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| 10 ft. | 1/2" | 3/8" | Black | No | 0.218" | 22 | 2 | 0000000 | 0000000 |
Curved Roller Track for Doors, Curtains, and Strip Doors
 Components Sold Separately |  Beige Powder-Coated Steel |
 Black Powder-Coated Steel |
Curved and straight track pieces allow you to create a wide variety of layouts for doors, curtains, and strip doors. Combine track, mounting brackets, hangers, and trolleys that fit the same inside track width to create a system. Select components that will support the capacity of the door or curtain you intend to hang up.
For technical drawings and 3-D models, click on a part number.
Select track based on the capacity of the door or curtain it will support. Powder-coated steel track is durable to resist wear and tear over time.
Inside | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Lg. | Track Radius, ft. | Wd. | Ht. | Thick. | Material | Color | Mounting Fasteners Included | Mounting Hole Dia. | Each | |
600-lb. Track Capacity | ||||||||||
90° Curve | ||||||||||
| 3' 2" | 2 | 1 3/4" | 2 5/16" | 0.19" | Powder-Coated Steel | Beige | No | 9/16" | 0000000 | 0000000 |
| 3' 2" | 2 | 1 3/4" | 2 5/16" | 0.19" | Powder-Coated Steel | Black | No | 9/16" | 00000000 | 000000 |
| 4' 9" | 3 | 1 3/4" | 2 5/16" | 0.19" | Powder-Coated Steel | Beige | No | 9/16" | 0000000 | 000000 |
| 6' 3" | 4 | 1 3/4" | 2 5/16" | 0.19" | Powder-Coated Steel | Beige | No | 9/16" | 0000000 | 000000 |
Straight | ||||||||||
| 10' | __ | 1 3/4" | 2 5/16" | 0.19" | Powder-Coated Steel | Beige | No | __ | 0000000 | 000000 |
| 10' | __ | 1 3/4" | 2 5/16" | 0.19" | Powder-Coated Steel | Black | No | __ | 00000000 | 000000 |
Choose brackets that match the capacity and material of your track. Brackets wrap around the outside of track to mount it in your custom layout. Wall-mount brackets attach directly on any vertical surface. Ceiling-mount brackets mount directly to ceiling joists or hang from a threaded rod.
A support bracket is required every 5 ft. of 600-lb. capacity track. Joint brackets join two pieces of track if you want to extend runs. You can also use them as support brackets. Use a wall-mount adapter bracket to convert a support or joint bracket into a wall-mount bracket.
| Bracket Type | For Inside Track Wd. | Ht. | Material | Color | Mounting Fasteners Included | Mounting Hole Dia. | Each | |
Wall Mount | ||||||||
|---|---|---|---|---|---|---|---|---|
| Wall-Mount Adapter | 1 3/4" | 2 1/2" | Powder-Coated Steel | Beige | No | 9/16" | 0000000 | 000000 |
| Wall-Mount Adapter | 1 3/4" | 2 1/2" | Powder-Coated Steel | Black | Yes | 9/16" | 00000000 | 00000 |
Ceiling Mount | ||||||||
| Support | 1 3/4" | 3 15/16" | Powder-Coated Steel | Beige | No | 9/16" | 0000000 | 00000 |
| Support | 1 3/4" | 3 15/16" | Powder-Coated Steel | Black | No | 9/16" | 00000000 | 00000 |
| Joint | 1 3/4" | 3 15/16" | Powder-Coated Steel | Beige | No | 9/16" | 0000000 | 000000 |
| Joint | 1 3/4" | 3 15/16" | Powder-Coated Steel | Black | No | 9/16" | 00000000 | 000000 |
Hangers attach to doors and curtains and glide along the track to open and close them. They are sold individually—a minimum of two are required per door. Hangers with a mounting plate attach to the top of your door and extend down the side.
Style C hangers adjust vertically between the bottom of the track and the top of the door.
Rollers | Bearing | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Style | Capacity, lbs. | For Inside Track Wd. | Ht. | Mounting Plate Ht. | Mounting Hole Dia. | Material | Color | No. of | Dia. | Type | Material | Mounting Fasteners Included | Each | |
For 600-lb. Track Capacity | ||||||||||||||
| C | 300 | 1 3/4" | 13 1/8" | 6 27/32" | 5/16" | Powder-Coated Steel | Gray | 1 | 2 1/8" | Ball | Steel | Yes | 0000000 | 0000000 |
Soft-Closing Heavy Duty Base- and Under-Mount Drawer Slides
To prevent drawers from slamming shut and support them even if they’re tall and full of heavy equipment, these steel slides have soft-closing bumpers and mount to the top and bottom of drawers. They’re commonly used in washdown areas such as kitchens because they have a powder coating to prevent rust and their ball bearings are encased to keep liquid out. Since they’re encased, the ball bearings spread weight more evenly than standard ball bearings, which makes them quieter and support more weight. To make sure the bearings don’t wobble or fall off track because of heavy loads, these slides have rail guides. Slides maintain a consistent amount of support as you fully extend them, so reaching deep inside drawers isn’t an issue. All are LGA tested according to DIN 4554 for safety, performance, and quality.
Bottom Slide | Top Slide | Mounting | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Closed Length | Travel Length | Mounting Location | Width | Height | Mounting Location | Width | Height | Capacity per Pair, lbs. | Roller Type | Fasteners Included | Screw Size | Color | Pair | |
Powder-Coated Steel | ||||||||||||||
| 22 5/8" | 22" | Base | 4 5/16" | 3 1/8" | Under Mount | 1 9/16" | 2 5/16" | 275 | Ball Bearing | No | 1/4", No. 10, No. 6 | White | 00000000 | 0000000 |
Top Mounting Plates for Hanging Track Doors
Create a point of attachment for track hangers on hanging doors. Since these plates mount discreetly on top, they leave your door's face free of hardware for a finished appearance. Pair them with any bolt-mount hanger (not included) that has the same thread size.
For technical drawings and 3-D models, click on a part number.