Roller Track Sets for Doors
These complete sets contain everything you need to create a system for hanging doors. Wall-mount support brackets can be mounted above doorways and are required every 2 ft. of track. Joint brackets attach sections of track and act as support brackets. Two hangers per door are required.
Inside | ||||||||
|---|---|---|---|---|---|---|---|---|
| Track Capacity, lbs. | For Door Thick. | Wd. | Ht. | Material | Mounting Fasteners Included | Mounting Hole Dia. | Each | |
Beige | ||||||||
12 ft. | ||||||||
| 400 | 1 1/2"-2 1/4" | 1 3/4" | 2 1/4" | Powder-Coated Steel | No | 3/8" | 0000000 | 0000000 |
| 600 | 1 3/4"-2 1/4" | 2 1/4" | 3 1/4" | Powder-Coated Steel | No | 5/8" | 0000000 | 00000000 |
Black | ||||||||
12 ft. | ||||||||
| 400 | 1 1/2"-2 1/4" | 1 3/4" | 2 1/4" | Powder-Coated Steel | No | 3/8" | 0000000 | 000000 |
| 600 | 1 3/4"-2 1/4" | 2 1/4" | 3 1/4" | Powder-Coated Steel | No | 5/8" | 0000000 | 00000000 |
Dust-Resistant Roller Track for Doors
Round track reduces edges where dust and debris can accumulate. Combine track, hangers, and accessories to create a system for hanging doors. For durability and corrosion resistance, the track is made of galvanized steel.
Door stops (sold separately) mount to the floor to keep sliding doors and panels from damaging walls and door frames.
For technical drawings and 3-D models, click on a part number.
Mounting Hole | 12 ft. | ||||||
|---|---|---|---|---|---|---|---|
| Track Capacity, lbs. | ID | Material | Mounting Fasteners Included | Ctr.-to-Ctr. | Dia. | Each | |
Track with Wall-Mount Bracket | |||||||
| 600 | 2 1/4" | Galvanized Steel | No | 24" | 5/16" | 00000000 | 000000 |
I-Beam Roller Track Sets for Doors
These complete sets contain everything you need to create a system for hanging doors. Track is lightweight aluminum and hangers are steel. All hangers adjust vertically between the bottom of the track and the top of the door. Two hangers per door are required.
Additional track and hangers let you create a longer run.
For technical drawings and 3-D models, click on a part number.
