Filter by
Housing Type
ID
Shaft Type
Linear Bearing Component
Mounting Holes Center-to-Center Length
Mounting Holes Center-to-Center Width
Shaft Material
Overall Height
DFARS Specialty Metals
Export Control Classification Number (ECCN)
REACH
RoHS
Static Load Capacity
Lubrication
Flange-Mount Linear Bearing Housings
![]() |
For 2 Bearings |
Slide up to two linear ball or sleeve bearings into these housings and secure them with the included internal retaining rings.
For 2 Bearings—Housings for two bearings give you better running accuracy and alignment than using two separate pillow blocks.
Linear Bearing Housings
![]() |
For 2 Bearings |
Slide up to two linear ball or sleeve bearings into these housings and secure them with the included internal retaining rings.
For 2 Bearings—Housings for two bearings give you better running accuracy and alignment than using two separate pillow blocks.
Overall | Mounting Holes | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Bearing OD | For Max. Bearing Lg. | Lg. | Wd. | Ht. | Ctr. Ht. | No. of | Dia. | Each | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
6061 Aluminum | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
For 2 Bearings | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
7/8" | 1 1/4" | 3 1/2" | 2" | 1 1/4" | 11/16" | 4 | 5/32" | 0000000 | 000000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
1 1/8" | 1 1/2" | 4" | 2 1/2" | 1 5/8" | 7/8" | 4 | 3/16" | 0000000 | 00000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
1 1/4" | 1 5/8" | 4 1/2" | 2 3/4" | 1 3/4" | 15/16" | 4 | 3/16" | 0000000 | 00000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
1 9/16" | 2 1/4" | 6" | 3 1/4" | 2 3/16" | 1 3/16" | 4 | 7/32" | 0000000 | 000000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
High-Load High-Speed Mounted Linear Sleeve Bearings
With two bearings mounted in a single housing, these bearings have load capacities more than 10 times as high as standard mounted linear sleeve bearings. A ceramic liner helps them achieve high speeds as well as rapid acceleration and deceleration. Made of anodized aluminum, their housing is lightweight and corrosion resistant. These bearings are for fixed alignment, ideal for well-aligned shafts. Note: Not for use with ceramic-coated aluminum or 300 series stainless steel shafts.
Fixed Alignment
![]() |
Overall, mm | Temp., ° F | Mounting Holes | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Shaft Dia., mm | Shaft Clearance, mm | Lg. | Wd. | Ht. | Ctr. Ht., mm | With End Seals | Dynamic Linear Load Cap. @ Speed | Static Load Cap., lb. | Min. | Max. | No. of | Dia., mm | Each | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Ceramic-Lined and -Coated 6061 Aluminum Bearings with Anodized 6063 Aluminum Housing | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
12 | 0.05 | 77 | 44 | 30 | 15 | Yes | 180 lb. @ 100 fpm | 2,200 | -400 | 385 | 4 | 5 | 0000000 | 000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
20 | 0.05 | 100 | 54 | 41 | 21 | Yes | 390 lb. @ 100 fpm | 5,200 | -400 | 385 | 4 | 6 | 0000000 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
25 | 0.05 | 136 | 76 | 51.5 | 26 | Yes | 600 lb. @ 100 fpm | 8,400 | -400 | 385 | 4 | 8 | 0000000 | 000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
High-Load Mounted Linear Sleeve Bearings
With two bearings mounted in one housing, these sleeve bearings can handle heavier loads than standard mounted linear sleeve bearings. All have an anodized aluminum housing that’s lightweight and stands up to corrosion. They also have a slippery, chemical-resistant PTFE liner, so there’s no need for added lubrication. Use these fixed-alignment bearings with round end-supported shafts where shaft misalignment is unlikely.
Fixed Alignment
![]() |
Overall, mm | Temp., ° F | Mounting Holes | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Shaft Dia., mm | Shaft Clearance, mm | Lg. | Wd. | Ht. | Ctr. Ht., mm | With End Seals | Dynamic Linear Load Cap. @ Speed | Static Load Cap., lb. | Min. | Max. | For Shaft Material | No. of | Dia., mm | Each | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
PTFE-Lined Ceramic-Coated 6061 Aluminum Bearings with Anodized 6063 Aluminum Housing | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
12 | 0.0127 | 77 | 44 | 30 | 15 | No | 300 lb. @ 100 fpm | 4,450 | -400 | 385 | Aluminum, Stainless Steel, Steel | 4 | 5 | 0000000 | 000000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
16 | 0.0127 | 89 | 50 | 38.5 | 19 | No | 400 lb. @ 100 fpm | 6,650 | -400 | 385 | Aluminum, Stainless Steel, Steel | 4 | 5 | 0000000 | 00000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
25 | 0.0127 | 136 | 76 | 51.5 | 26 | No | 1,000 lb. @ 100 fpm | 16,850 | -400 | 385 | Aluminum, Stainless Steel, Steel | 4 | 8 | 0000000 | 000000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
High-Load High-Speed Mounted Linear Sleeve Bearings for Support Rail Shafts
With two bearings mounted in a single housing, these bearings have higher load capacities than standard ones. A ceramic liner helps them achieve high speeds as well as rapid acceleration and deceleration. Mount these bearings on a support rail shaft for applications requiring maximum rigidity. Made of ceramic-coated aluminum, their housing is lightweight and corrosion resistant. These bearings are for fixed alignment, ideal for well-aligned shafts. Note: Not for use with ceramic-coated aluminum or 300 series stainless steel shafts.
Fixed Alignment
![]() |
Overall, mm | Temp., ° F | Mounting Holes | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Shaft Dia., mm | Shaft Clearance, mm | Lg. | Wd. | Ht. | Ctr. Ht., mm | Wd., mm | With End Seals | Dynamic Linear Load Cap. @ Speed | Static Load Cap., lb. | Min. | Max. | For Shaft Material | No. of | Dia., mm | Each | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Ceramic-Lined 6061 Aluminum Bearings with Ceramic-Coated 6063 Aluminum Housing | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
12 | 0.0127 to 0.0381 | 77 | 40 | 27.5 | 17 | 8.5 | Yes | 300 lb. @ 100 fpm | 4,450 | -400 | 400 | Stainless Steel, Steel | 4 | 5 | 0000000 | 000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
16 | 0.0127 to 0.0381 | 89 | 45 | 33 | 20 | 10 | Yes | 400 lb. @ 100 fpm | 6,650 | -400 | 400 | Stainless Steel, Steel | 4 | 5 | 0000000 | 000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
20 | 0.0127 to 0.0381 | 100 | 48 | 39 | 23 | 10 | Yes | 600 lb. @ 100 fpm | 10,450 | -400 | 400 | Stainless Steel, Steel | 4 | 6 | 0000000 | 000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
25 | 0.0127 to 0.0381 | 136 | 60 | 47 | 27 | 11.5 | Yes | 1,000 lb. @ 100 fpm | 16,850 | -400 | 400 | Stainless Steel, Steel | 4 | 6 | 0000000 | 000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
30 | 0.013 to 0.05 | 154 | 70 | 56 | 33 | 14 | Yes | 1,800 lb. @ 100 fpm | 23,700 | -400 | 400 | Stainless Steel, Steel | 4 | 8 | 0000000 | 000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
High-Load Mounted Linear Sleeve Bearings for Support Rail Shafts
With two bearings mounted in one housing, these sleeve bearings are designed to withstand heavy loads. Use them on round support rail shafts for applications that require maximum rigidity. All of these bearings have a ceramic-coated aluminum housing that’s lightweight and stands up to corrosion. They also have a slippery, chemical-resistant PTFE liner, so there’s no need for lubrication. These fixed-alignment bearings are for use where shaft misalignment is unlikely.
Fixed Alignment
![]() |
Overall, mm | Temp., ° F | Mounting Holes | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Shaft Dia., mm | Shaft Clearance, mm | Lg. | Wd. | Ht. | Ctr. Ht., mm | Wd., mm | With End Seals | Dynamic Linear Load Cap. @ Speed | Static Load Cap., lb. | Min. | Max. | For Shaft Material | No. of | Dia., mm | Each | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
PTFE-Lined 6061 Aluminum Bearings with Ceramic-Coated 6063 Aluminum Housing | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
12 | 0.0127 to 0.0381 | 77 | 40 | 27.5 | 17 | 8.5 | No | 300 lb. @ 100 fpm | 4,450 | -400 | 385 | Ceramic-Coated Aluminum, Stainless Steel, Steel | 4 | 5 | 0000000 | 000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
20 | 0.0127 to 0.0381 | 100 | 48 | 39 | 23 | 10 | No | 600 lb. @ 100 fpm | 10,450 | -400 | 385 | Ceramic-Coated Aluminum, Stainless Steel, Steel | 4 | 6 | 0000000 | 000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
25 | 0.0127 to 0.0381 | 136 | 60 | 47 | 27 | 11.5 | No | 1,000 lb. @ 100 fpm | 16,850 | -400 | 385 | Ceramic-Coated Aluminum, Stainless Steel, Steel | 4 | 6 | 0000000 | 000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
30 | 0.013 to 0.05 | 154 | 70 | 56 | 33 | 14 | No | 1,800 lb. @ 100 fpm | 23,700 | -400 | 385 | Ceramic-Coated Aluminum, Stainless Steel, Steel | 4 | 8 | 0000000 | 000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||