Rods along the barrel of these cylinders secure the end caps and shield the barrel from impact.

Get the power and stroke of other tie rod cylinders in less than half the space.

Made to fit the most common mounting footprint, these cylinders have an NFPA (National Fluid Power Association) industry-standard footprint, ensuring easy interchangeability.

Cylinders have two parallel piston rods that prevent twisting as they extend and retract.

An extruded-aluminum body means these cylinders have no open spaces for debris to collect.

An extruded-aluminum body means these cylinders have no open spaces for debris to collect. They have an ISO industry-standard footprint to match common mounting patterns for easy interchangeability.

Push and pull light duty loads. These air cylinders use compressed air to both extend and retract, so they operate at nearly full force in either direction.

Move loads between three positions instead of two.

Also known as pancake cylinders, these deliver as much force as other cylinders, but with a shorter stroke to function in small spaces.

Simplify your setup by running fluid or air through the hollow piston in these air cylinders. The rod extends from both ends, so they can push an object and pull another at the same time, unlike standard air cylinders.

Minimize the release of particles that can damage electronics or contaminate batches as you push and pull light loads. These air cylinders are designed with seals and caps that prevent particles from escaping.

Push and pull light duty loads in areas constantly exposed to dust and powders as fine as flour.

Convenient for use with devices such as grippers and printing heads, these air slides have a nonrotating head that provides steady motion and a larger mounting area than air cylinders.

Prevent dust and fine particles from contaminating your clean room or damaging sensitive electronics while moving grippers and other pick-and-place equipment.

Push one object while pulling another—when one head on these air slides extends, the other retracts.

Move heavy loads back and forth—these air slides have over twice the capacity as standard rodless ones. They are often used for high-volume diverting and sorting.

Modify the stroke length on these air slides to meet changing application requirements—slides have adjustable shaft collars on the guide rods that you can move to fine-tune the stroke length.

For multiple mounting options, these air cylinders match an industry standard ISO footprint and have threaded holes on the face and sides.

Mount these cylinders directly to equipment in environments where contamination is a concern, such as electronics manufacturing.

When you want to control the angle of your shaft’s rotation and are tight on space, choose these rotary air actuators.

Designed to turn heavy loads, these rotary air actuators have rack-and-pinion gears that provide high torque output.

Create linear motion economically with one of these open-frame solenoids.

Smaller than any other actuator in our offering, these actuators’ short stroke length makes them good for automating fine, precise adjustments.

A lead screw that converts rotational motion to linear motion sits inside the motor body for a compact footprint. Add a driver and controller to these actuators to repeatedly position loads with speed and precision.

Without any hardwiring, these actuators give you control over your push-pull motion using either a hand or foot switch.

Push one heavy load while pulling another. These hydraulic cylinders have a rod that runs through both ends, so when it extends on one end, it retracts on the other.

Made of 303 stainless steel, these hydraulic cylinders move heavy loads without corroding in wet areas.

These cylinders have a magnetic piston that can be used with tie rod-mount proximity switches to electronically indicate piston position. For easy interchangeability, their mounting footprint meets NFPA or NFPA and JIC industry standards.