Double-Row Ball Bearings

Filter by

Bearing Construction

Double Row

System of Measurement

Shaft Diameter

Width

Bearing Seal Type

Bearing Trade Number

For Load Direction

Combined Radial and Thrust

Ball Bearing Profile

Bearing Type

Shaft Type

Lubrication

Cage Material

For Housing ID

Maximum Rotation Speed

Ball Material

Inner Ring Type

Shaft Mount Type

Material

Dynamic Radial Load Capacity

Less than 10,000 lb.

10,000 lb. to 19,999 lb.

40,000 lb. or greater

REACH

Compliant

Not Compliant

RoHS

Compliant

DFARS Specialty Metals

Exempt

Export Control Classification Number (ECCN)

Maximum Temperature

164 Products

Self-Aligning Ball Bearings

Misalignments correct themselves on the fly in these bearings. Two rows of balls have separate raceways in the inner ring and a shared raceway in the outer ring, so the balls rock back and forth to compensate for misalignment. This construction also reduces noise and vibration.

Open—With no rubber seal to block airflow, these bearings dissipate heat quickly, extending the life of the lubricant and reducing friction over time.

Sealed—The best choice for dirty environments. A barrier seals out dust so it won't gunk up or wear down the balls. However, these bearings retain the most heat since air can't flow through.

Steel—Strong and wear resistant. However, these bearings are best for dry environments since moisture will cause them to rust.

ABEC Rating—Bearings with an ABEC rating meet industry tolerance standards established by the Annular Bearing Engineers Committee (ABEC). They're rated on a scale from 1 to 9. The higher the rating, the tighter the tolerance. Bearings rated ABEC 1 or 3 are precise enough for most applications. If your application consistently runs at high speeds or requires high accuracy, consider bearings rated ABEC 5 or higher, since they generate less friction and heat.

								Temp. Range, ° F
	For Shaft Dia., mm	For Housing ID, mm	Wd., mm	ABEC Rating	Dynamic Radial Load Cap., lb.	Max. Rotation Speed, rpm	Misalignment Capability	Min.	Max.	Inner Ring Type	Bearing Trade No.		Each
Open







				Steel

				6	19	6	1	560	30,000	4°	Not Rated	210	Standard	126	00000000	000000


				8	22	7	1	590	40,000	3°	-30	210	Standard	108	0000000	00000
				10	30	9	1	1,200	22,000	4°	Not Rated	210	Standard	1200	00000000	00000
				10	30	14	1	1,800	34,000	2.5°	-30	210	Standard	2200	0000000	000000
				10	35	17	1	2,050	18,000	4°	Not Rated	210	Standard	2300	00000000	00000
				12	32	10	1	1,250	22,000	4°	Not Rated	210	Standard	1201	00000000	00000
				12	32	14	1	1,900	30,000	2.5°	-30	210	Standard	2201	0000000	000000
				15	35	11	1	1,700	18,000	4°	Not Rated	210	Standard	1202	00000000	00000
				15	35	14	1	1,950	26,000	2.5°	-30	210	Standard	2202	0000000	000000
				15	42	13	1	2,150	16,000	4°	Not Rated	210	Standard	1302	00000000	00000
				15	42	17	1	2,750	14,000	4°	Not Rated	210	Standard	2302	00000000	000000


				17	40	12	1	1,750	16,000	4°	Not Rated	210	Standard	1203	00000000	00000
				17	40	16	1	2,350	24,000	2.5°	-30	210	Standard	2203	0000000	000000
				20	47	14	1	2,850	20,000	2.5°	-30	210	Standard	1204	0000000	00000
				20	47	18	1	3,750	20,000	2.5°	-30	210	Standard	2204	0000000	000000
				20	52	15	1	2,800	12,000	4°	Not Rated	210	Standard	1304	00000000	00000
				20	52	21	1	4,050	19,000	3°	-30	210	Standard	2304	0000000	000000
				25	52	15	1	3,200	18,000	2.5°	-30	210	Standard	1205	0000000	00000
				25	52	18	1	3,750	18,000	2.5°	-30	210	Standard	2205	0000000	000000
				25	62	17	1	4,050	10,000	4°	Not Rated	210	Standard	1305	00000000	00000
				25	62	24	1	6,050	16,000	3°	-30	210	Standard	2305	0000000	000000


				30	62	16	1	3,550	10,000	4°	Not Rated	210	Standard	1206	00000000	00000
				30	62	20	1	5,350	15,000	2.5°	-30	210	Standard	2206	0000000	000000
				30	72	27	1	7,000	13,000	3°	-30	210	Standard	2306	0000000	000000
				35	72	17	1	3,550	8,500	4°	Not Rated	210	Standard	1207	00000000	00000
				35	72	23	1	6,750	12,000	2.5°	-30	210	Standard	2207	0000000	000000
				35	80	21	1	5,650	7,500	4°	Not Rated	210	Standard	1307	00000000	000000
				35	80	31	1	8,900	12,000	3°	-30	210	Standard	2307	0000000	000000
				40	80	18	1	4,300	7,500	4°	Not Rated	210	Standard	1208	00000000	00000
				40	80	23	1	7,150	11,000	2.5°	-30	210	Standard	2208	0000000	000000
				40	90	23	1	6,650	6,700	4°	Not Rated	210	Standard	1308	00000000	000000


				45	100	36	1	12,350	5,600	4°	Not Rated	210	Standard	2309	00000000	000000
				50	110	27	1	9,750	5,600	4°	Not Rated	210	Standard	1310	00000000	000000
				50	110	40	1	14,600	5,000	4°	Not Rated	210	Standard	2310	00000000	000000
				55	100	25	1	6,000	6,000	4°	Not Rated	210	Standard	2211	00000000	000000
				55	120	43	1	17,150	4,800	4°	Not Rated	210	Standard	2311	00000000	000000
				60	110	28	1	7,600	5,300	4°	Not Rated	210	Standard	2212	00000000	000000
				65	120	31	1	9,750	4,800	4°	Not Rated	210	Standard	2213	00000000	000000


				Sealed







	Steel

	10						30	14	1	1,200	17,000	1.5°	-30	210	Standard	2200-2RS	0000000	000000


	12	32					14	1	1,400	16,000	1.5°	-30	210	Standard	2201-2RS	0000000	000000
	15	35	14				1	1,650	14,000	1.5°	-30	210	Standard	2202-2RS	0000000	000000
	17	40	16				1	1,950	12,000	1.5°	-30	210	Standard	2203-2RS	0000000	000000
	17	47	19				1	2,850	11,000	1.5°	-30	210	Standard	2303-2RS	0000000	000000
	20	47	18				1	2,850	10,000	1.5°	-30	210	Standard	2204-2RS	0000000	000000
	20	52	21				1	3,200	9,000	1.5°	-30	210	Standard	2304-2RS	0000000	000000
	25	52	18				1	3,200	9,000	1.5°	-30	210	Standard	2205-2RS	0000000	000000
	25	62	24				1	4,250	7,500	1.5°	-30	210	Standard	2305-2RS	0000000	000000
	30	62	20				1	3,500	7,500	1.5°	-30	210	Standard	2206-2RS	0000000	000000
	30	72	27				1	5,050	6,700	1.5°	-30	210	Standard	2306-2RS	0000000	000000


	35	72	23				1	4,250	6,300	1.5°	-30	210	Standard	2207-2RS	0000000	000000
	35	80	31				1	5,950	5,600	1.5°	-30	210	Standard	2307-2RS	0000000	000000
	40	80	23				1	4,450	5,600	1.5°	-30	210	Standard	2208-2RS	0000000	000000

Angular Contact Ball Bearings

Support radial and thrust loads at the same time. These bearings are often found inside equipment such as gearboxes and pumps. For example, a bearing inside a gearbox withstands a radial load when the gear is engaged and a momentary thrust load when you shift to a new one. While they don't handle as much force from radial loads as standard bearings, you can pair them with a cylindrical roller bearing to increase their load capacity.

Double Row—Double-row bearings handle thrust loads from both directions.

Open—With no rubber seal to block airflow, these bearings dissipate heat quickly, extending the life of the lubricant and reducing friction over time.

Shielded—The balls are covered just enough to keep out large particles while allowing air to pass through and dissipate heat.

Sealed—The best choice for dirty environments. A barrier seals out dust so it won't gunk up or wear down the balls. However, these bearings retain the most heat since air can't flow through.

Steel—Strong and wear resistant. However, these bearings are best for dry environments since moisture will cause them to rust.

										Temp. Range, ° F
	For Shaft Dia., mm	For Housing ID, mm	Wd., mm	ABEC Rating	Material	Dynamic Combined Load Cap., lbf	Max. Rotation Speed, rpm	Lubrication	Contact Angle	Min.	Max.	Bearing Trade No.		Each
Double Row







				Open

				10	30	14	1	Steel	1,700	22,000	Required	30°	-40	250	3200	00000000	000000


				12	32	15.9	1	Steel	2,250	20,000	Required	30°	-40	250	3201	00000000	00000
				15	35	15.9	1	Steel	2,500	17,000	Required	30°	-40	250	3202	00000000	00000
				17	40	17.5	1	Steel	3,200	15,000	Required	30°	-40	250	3203	00000000	00000
				17	47	22.2	1	Steel	4,850	14,000	Required	30°	-40	250	3303	00000000	00000
				20	47	20.6	3	Steel	4,450	14,000	Required	30°	-40	250	3204	00000000	00000
				20	52	22.2	3	Steel	5,300	13,000	Required	30°	-40	250	3304	00000000	000000
				25	52	20.6	3	Steel	4,850	12,000	Required	30°	-40	250	3205	00000000	00000
				25	62	25.4	3	Steel	7,150	11,000	Required	30°	-40	250	3305	00000000	000000
				30	62	23.8	3	Steel	6,700	10,000	Required	30°	-40	250	3206	00000000	000000
				35	72	27	3	Steel	8,950	9,000	Required	30°	-40	250	3207	00000000	000000


				40	80	30.2	3	Steel	10,600	8,000	Required	30°	-40	250	3208	00000000	000000
				50	90	30.2	3	Steel	11,400	7,000	Required	30°	-40	250	3210	00000000	000000




						Shielded

						10	30	14	1	Steel	1,700	24,000	Lubricated	30°	-40	250	3200-2Z	00000000	000000


						12	32	15.9	1	Steel	2,250	22,000	Lubricated	30°	-40	250	3201-2Z	00000000	000000
						15	35	15.9	1	Steel	2,500	18,000	Lubricated	30°	-40	250	3202-2Z	00000000	000000
						17	40	17.5	1	Steel	3,200	16,000	Lubricated	30°	-40	250	3203-2Z	00000000	00000
						17	47	22.2	1	Steel	4,850	14,000	Lubricated	30°	-40	250	3303-2Z	00000000	000000
						20	47	20.6	3	Steel	4,450	14,000	Lubricated	30°	-40	300	3204-2Z	00000000	000000
						20	52	22.2	3	Steel	5,300	13,000	Lubricated	30°	-40	300	3304-2Z	00000000	000000
						25	52	20.6	3	Steel	4,850	12,000	Lubricated	30°	-40	300	3205-2Z	00000000	000000
						25	62	25.4	3	Steel	7,150	11,000	Lubricated	30°	-40	300	3305-2Z	00000000	000000
						30	62	23.8	3	Steel	6,700	10,000	Lubricated	30°	-40	250	3206-2Z	00000000	000000
						35	72	27	3	Steel	8,950	9,000	Lubricated	30°	-40	300	3207-2Z	00000000	000000


						40	80	30.2	3	Steel	10,600	8,000	Lubricated	30°	-40	300	3208-2Z	00000000	000000
						50	90	30.2	3	Steel	11,400	7,000	Lubricated	30°	-40	300	3210-2Z	00000000	000000




								Sealed

								10	30	14	1	Steel	1,700	17,000	Lubricated	30°	-40	210	3200-2RS	00000000	000000


								12	32	15.9	1	Steel	2,250	15,000	Lubricated	30°	-40	210	3201-2RS	00000000	000000
								15	35	15.9	1	Steel	2,500	14,000	Lubricated	30°	-40	210	3202-2RS	00000000	000000
								17	40	17.5	1	Steel	3,200	12,000	Lubricated	30°	-40	210	3203-2RS	00000000	00000
								17	47	22.2	1	Steel	4,850	11,000	Lubricated	30°	-40	210	3303-2RS	00000000	000000
								20	47	20.6	3	Steel	4,450	10,000	Lubricated	30°	-40	210	3204-2RS	00000000	000000
								20	52	22.2	3	Steel	5,300	9,000	Lubricated	30°	-40	210	3304-2RS	00000000	000000
25								52	20.6	3	Steel	4,850	8,500	Lubricated	30°	-40	210	3205-2RS	00000000	000000
25	62							25.4	3	Steel	7,150	7,500	Lubricated	30°	-40	210	3305-2RS	00000000	000000
30	62							23.8	3	Steel	6,700	7,500	Lubricated	30°	-40	210	3206-2RS	00000000	000000
35	72							27	3	Steel	8,950	6,300	Lubricated	30°	-40	210	3207-2RS	00000000	000000


40	80	30.2	3					Steel	10,600	5,600	Lubricated	30°	-40	210	3208-2RS	00000000	000000
50	90	30.2	3					Steel	11,400	4,800	Lubricated	30°	-40	210	3210-2RS	00000000	000000

High-Load Dry-Running Ball Bearings

Double the balls for double the load capacity—these bearings carry twice as much weight as standard dry-running ball bearings. Made of naturally slippery plastic, there's no lubricant to maintain. No lubricant means no oil that could drip off, wash out, or collect dust, so they're ideal for spic-and-span spaces. They stand up to thorough cleanings since they won't rust or warp from moisture.

Open—With no rubber seal to block airflow, these bearings dissipate heat quickly, reducing wear and extending the life of the bearing.

Acetal—The most common choice for plastic bearings, acetal is economical yet still stands up to daily wear and tear.

316 Stainless Steel Balls—Won't corrode from salt water or harsh chemicals, such as bleach and chlorine found in cleaning solutions.

Glass Balls—Nonmagnetic, so they won't interfere with sensors and other sensitive electronics.

						Temp. Range, ° F				316 Stainless Steel Balls		Glass Balls
	For Shaft Dia.	For Housing ID	Wd.	Dynamic Radial Load Cap., lb.	Max. Rotation Speed, rpm	Min.	Max.	ABEC Rating	Bearing Trade No.		Each		Each
Open







				Acetal

				1/4"	5/8"	3/8"	50	1,800	-40	180	Not Rated	R4	00000000	000000	———	0


				1/4"	3/4"	3/8"	50	1,800	-40	180	Not Rated	R4A	00000000	00000	00000000	000000
				3/8"	7/8"	7/16"	60	1,200	-40	180	Not Rated	R6	00000000	00000	———	0
				3/8"	1 3/8"	7/16"	65	1,000	-40	180	Not Rated	R10B	00000000	00000	———	0
				1/2"	1 1/8"	7/16"	75	900	-40	180	Not Rated	R8	00000000	00000	00000000	00000
				1/2"	1 3/8"	7/16"	85	800	-40	180	Not Rated	R10B	———	0	00000000	00000
				5/8"	1 3/8"	7/16"	65	1,000	-40	180	Not Rated	R8	———	0	00000000	00000
				5/8"	1 3/8"	7/16"	85	800	-40	180	Not Rated	R10B	00000000	00000	———	0
				3/4"	1 5/8"	5/8"	100	600	-40	180	Not Rated	R12	00000000	00000	———	0
				1"	2"	3/4"	125	500	-40	180	Not Rated	R16	00000000	00000	00000000	00000
				1 1/4"	2"	3/4"	125	500	-40	180	Not Rated	R16	00000000	00000	———	0


				1 1/4"	2 1/4"	3/4"	125	500	-40	180	Not Rated	R20	00000000	00000	———	0
				10 mm	30 mm	14 mm	75	900	-40	180	Not Rated	A5200-6	00000000	00000	———	0
				12 mm	32 mm	16 mm	75	900	-40	180	Not Rated	A5201-6	00000000	00000	———	0
				15 mm	35 mm	16 mm	85	800	-40	180	Not Rated	A5202-6	00000000	00000	———	0
				17 mm	40 mm	17 mm	85	800	-40	180	Not Rated	A5203-6	00000000	00000	———	0
				20 mm	47 mm	21 mm	100	600	-40	180	Not Rated	A5204-6	00000000	00000	———	0
				25 mm	52 mm	21 mm	125	500	-40	180	Not Rated	A5205-6	00000000	00000	———	0
				30 mm	62 mm	23 mm	150	500	-40	180	Not Rated	A5206-6	00000000	00000	———	0

Spherical-Roller Bearings

Two rows of rollers give these bearings dynamic radial load capacities over five times higher than comparably sized tapered-roller bearings. Also known as rock crusher bearings, they handle heavy shock loads and are used for metal milling machinery, mining and oil field equipment, and in paper mills.

						Combined Load Cap., lbf
	For Shaft Dia., mm	For Housing ID, mm	Wd., mm	Bearing Trade No.	Ring Material	Dynamic	Static	Max. Rotation Speed, rpm	Lubrication	Max. Temp., ° F		Each
Open Bearing



		25	52	18	22205	Steel	8,400	8,300	7,100	Required	390	000000	0000000


		30	62	20	22206	Steel	11,200	11,200	6,000	Required	390	000000	000000
		35	72	23	22207	Steel	15,500	15,900	5,300	Required	390	000000	000000
		40	80	23	22208	Steel	25,400	22,300	6,700	Required	390	000000	000000
		40	90	33	22308	Steel	35,000	33,400	7,600	Required	212	0000000	000000
		45	85	23	22209	Steel	26,500	24,900	6,000	Required	390	000000	000000
		45	100	36	22309	Steel	42,000	41,000	6,800	Required	212	0000000	000000
		50	90	23	22210	Steel	24,500	24,000	9,800	Required	212	0000000	000000
		50	110	40	22310	Steel	51,250	50,000	6,300	Required	212	0000000	000000
		55	100	25	22211	Steel	33,400	32,300	5,300	Required	390	000000	000000
		60	110	28	22212	Steel	40,000	39,100	4,800	Required	390	000000	000000


		65	120	31	22213	Steel	49,500	51,500	4,300	Required	390	000000	000000
		65	140	48	22313	Steel	78,500	82,000	5,000	Required	212	0000000	000000
		70	125	31	22214	Steel	50,500	52,000	4,000	Required	390	0000000	000000
		70	150	51	22314	Steel	87,500	87,500	4,800	Required	212	0000000	000000
		75	130	31	22215	Steel	53,500	54,750	4,000	Required	390	0000000	000000
		80	140	33	22216	Steel	59,250	61,750	3,600	Required	390	0000000	000000
		85	150	36	22217	Steel	69,500	73,000	3,400	Required	390	0000000	000000
		90	160	40	22218	Steel	80,750	88,750	3,200	Required	390	0000000	000000
		95	170	43	22219	Steel	93,250	101,000	3,000	Required	390	0000000	000000
		100	180	46	22220	Steel	102,000	110,000	2,800	Required	390	0000000	000000


		110	200	53	22222	Steel	136,000	145,000	2,600	Required	390	0000000	000000

Tapered-Bore Ball Bearings

Mount these bearings on tapered shafts. Or, pair with an adapter sleeve to install them on round shafts without needing to press fit. The two rows of balls have separate raceways in the inner ring and a shared raceway in the outer ring, so the balls rock back and forth to compensate for misalignment. This construction also reduces noise and vibration.

Open—With no rubber seal to block airflow, these bearings dissipate heat quickly, extending the life of the lubricant and reducing friction over time.

Steel—Strong and wear resistant. However, these bearings are best for dry environments since moisture will cause them to rust.

	Bearings														Adapter Sleeves
									Temp. Range
	For Shaft Dia., mm	For Housing ID, mm	Wd., mm	ABEC Rating	Dynamic Radial Load Cap., lb.	Max. Rotation Speed, rpm	Misalignment Capability	Rate of Taper	Min.	Max., ° F	Inner Ring Type	Bearing Trade No.		Each	For Shaft Dia., mm		Each
Open







				Steel

				20	47	14	1	2,200	14,000	4°	1:12	Not Rated	240	Standard	1204K	0000000	000000	—	———	0


				20	52	15	1	2,800	12,000	4°	1:12	Not Rated	240	Standard	1304K	0000000	00000	—	———	0
				25	52	15	1	2,700	12,000	4°	1:12	Not Rated	240	Standard	1205K	0000000	00000	—	———	0
				25	52	18	1	2,750	12,000	4°	1:12	Not Rated	240	Standard	2205K	0000000	00000	20	0000000	000000
				30	62	16	1	3,550	10,000	4°	1:12	Not Rated	240	Standard	1206K	0000000	00000	25	0000000	00000
				30	72	27	1	7,150	8,000	4°	1:12	Not Rated	240	Standard	2306K	0000000	000000	25	00000000	00000
				35	72	17	1	3,550	8,500	4°	1:12	Not Rated	240	Standard	1207K	0000000	00000	30	0000000	00000
				40	80	18	1	4,300	7,500	4°	1:12	Not Rated	240	Standard	1208K	0000000	00000	35	0000000	00000
				40	80	23	1	5,000	7,500	4°	1:12	Not Rated	240	Standard	2208K	0000000	000000	35	0000000	00000
				45	85	23	1	5,200	7,100	4°	1:12	Not Rated	240	Standard	2209K	0000000	000000	40	0000000	00000
				45	100	36	1	12,350	5,600	4°	1:12	Not Rated	240	Standard	2309K	0000000	000000	40	00000000	00000


				55	100	25	1	6,000	6,000	4°	1:12	Not Rated	240	Standard	2211K	0000000	000000	50	0000000	00000

High-Load Tapered-Roller Bearings


Assembled View	Exploded View

Double rows of tapered bearings support large shafts with heavy loads. They also handle thrust loads in either direction as well as radial loads. All come assembled and ready to use.

						Radial Load Cap., lb.		Thrust Load Cap., lb.
	For Shaft Dia.	For Housing ID	Wd.	Bearing Trade No.	Taper Direction	Dynamic	Static	Dynamic	Static	Thrust Clearance	For Thrust Load Type	Max. Rotation Speed, rpm	Lubrication	Temp. Range, ° F	Includes		Each
For Combined Radial and Thrust Load—Open with Steel Ring



		1 1/4"	2 5/16"	31/32"	08125/08231D	Out	12,400	7,850	5,750	10,900	0.008"	Two Direction	12,000	Required	-65 to 250	One Spacer	0000000	0000000


		2 1/4"	4 1/4"	2 1/8"	462/452D	Out	62,900	37,200	20,700	36,400	0.012"	Two Direction	6,700	Required	-65 to 250	One Spacer	0000000	000000
		4"	7 1/2"	4"	861/854D	Out	179,000	142,000	59,000	138,000	0.012"	Two Direction	3,800	Required	-65 to 250	One Spacer	0000000	00000000

Needle-Roller Bearings

Also known as drawn-cup roller bearings, these are our thinnest roller bearings. The outer ring is drawn out to form a lip that holds the bearing together. Bearings take on the shape of their housing and may be oblong prior to installation.

Open Bearing—Open bearings dissipate heat more efficiently than sealed bearings.

				Radial Load Cap., lb.
	For Shaft Dia., mm	For Housing ID, mm	Wd., mm	Dynamic	Static	Max. Rotation Speed, rpm	Lubrication	For Shaft Surface Smoothness, Ra, μin	Temp. Range, ° F	Specs. Met		Each
For Radial Load—Open with Steel Ring



		15	21	22	3,000	4,350	16,500	Required	8	-20 to 280	DIN 618, ISO 3245	00000000	000000


		16	22	22	2,900	4,350	15,600	Required	8	-20 to 280	DIN 618, ISO 3245	00000000	00000
		20	26	30	4,900	8,950	12,700	Required	8	-20 to 280	DIN 618, ISO 3245	00000000	00000
		25	32	38	7,600	14,800	10,200	Required	8	-20 to 280	DIN 618, ISO 3245	00000000	00000
		30	37	38	8,400	17,750	8,600	Required	8	-20 to 280	DIN 618, ISO 3245	00000000	00000