A linear scale and micrometer-like hand wheel measure travel distance in increments of 0.001".

With fewer moving parts and no need for lubrication, sleeve bearing carriages perform better in dusty and wet environments than ball and roller bearing carriages. They're also better at handling impact and vibration.

A handle on the side of the carriage locks the carriage in place.

Create a self-aligning system that can be locked in place with these carriages and guide rails.

Threaded inserts secure the bearing to the carriage and prevent it from loosening due to frequent starts and stops.

Compensate for rail misalignment in low-clearance applications with these carriages and guide rails.

Build loops, circuits, and curved paths in assembly stations and other repetitive processes.

Threaded inserts secure the bearing to the carriage and prevent it from loosening due to frequent starts and stops.

C-shaped guide rails grip the carriage around the outside to support linear motion along walls and other vertical surfaces.

Needle-roller bearings give these track roller carriages higher load capacities than other track roller carriages.

High-temperature PTFE-thickened grease enables these carriages to operate in temperatures up to 500° F, higher than any other carriage that we offer.

Combine with a T-slotted rail to add linear motion to your assembly.

These track roller carriages and guide rails are stainless steel for use in wet, corrosive environments.

Mount along a wall or other vertical surface.

Made of stainless steel, these carriages and guide rails are more corrosion resistant than steel carriages and guide rails.

Designed specifically for use on horizontal surfaces, the contact angle of the ball bearings on the rail allows these carriages to last longer than other carriages.

These carriages and guide rails are steel.

Designed for use on horizontal surfaces, the contact angle of the ball bearings on the rail allows these carriages to last longer than other carriages.

For smooth, accurate movement around curves and loops, these carriages have ball bearings that work well in high-speed, high-load applications.

Mount to vertical surfaces for applications where tight tolerances aren't required.

With a wide base and low-profile design, these carriages and guide rails stabilize moment (twisting) and off-center loads better than other carriages and rails. They're good for use in areas where multiple carriages or rails won't fit.

With PTFE sleeve bearings and a low-friction ball screw, these slides don’t require the mess and maintenance of lubrication but still give you precise positioning anywhere along the length of their stroke.