McMaster-Carr logo
    Filter by
    System of Measurement
    Diameter
    Attribute Image
    Tolerance Rating
    End Type
    Fastener Head Type
    Industrial Info Compare
    Double Shear Breaking Strength
    DFARS Specialty Metals
    Industrial Info Compare
    Export Control Classification Number (ECCN)
    Industrial Info Snippet
    Head Diameter
    Head Height
    Hole Diameter
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    157 Products

    Dowel Pins

    Precisely align machine parts and prevent movement during assembly. These dowel pins are machined to tight tolerances and have a uniform diameter for a snug fit. They can also be used as a pivot, shaft, or hinge to join moving components. Since dowel pins can be hard to remove, they are best suited for permanent fixtures that don't require frequent adjustments or disassembly.
    Steel
    Image of Product. Front orientation. Dowel Pins. Standard Tolerance, Plain Head.
    High-Strength Alloy Steel—Our strongest, most wear-resistant pins, these won't bend or break from vibration. Use them for high-stress applications, such as mounting and aligning hydraulic cylinders and injection molds. They perform best in dry environments since moisture will cause them to rust.
    Lg.,
    mm
    Dia. Tolerance,
    mm
    Double Shear Breaking
    Strength, lbf
    Min.
    Hardness
    Specs. Met
    Pkg.
    Qty.
    Pkg.
    High-Strength Alloy Steel
     
    2 mm Diameter
    40.002 to 0.008700Rockwell C52DIN 6325-m6, ISO 873450000000000000000
    50.002 to 0.008Not RatedRockwell C52DIN 6325-m6, ISO 8734500000000000000
    60.002 to 0.008Not RatedRockwell C52DIN 6325-m6, ISO 87345000000000000000
    70.002 to 0.008Not RatedRockwell C52DIN 6325-m6, ISO 873450000000000000
    80.002 to 0.008Not RatedRockwell C52DIN 6325-m6, ISO 87345000000000000000
    90.002 to 0.008Not RatedRockwell C52DIN 6325-m6, ISO 873450000000000000
    100.002 to 0.008Not RatedRockwell C52DIN 6325-m6, ISO 87345000000000000000
    120.002 to 0.008Not RatedRockwell C52DIN 6325-m6, ISO 87345000000000000000
    140.002 to 0.008Not RatedRockwell C52DIN 6325-m6, ISO 8734500000000000000
    160.002 to 0.008Not RatedRockwell C52DIN 6325-m6, ISO 87345000000000000000
    180.002 to 0.008Not RatedRockwell C52DIN 6325-m6, ISO 8734500000000000000
    200.002 to 0.008Not RatedRockwell C52DIN 6325-m6, ISO 87345000000000000000
    220.002 to 0.008700Rockwell C58DIN 6325-m6, ISO 87345000000000000000
    240.002 to 0.008Not RatedRockwell C52DIN 6325-m6, ISO 87342500000000000000
    260.002 to 0.008700Rockwell C58DIN 6325-m6, ISO 87342500000000000000
    280.002 to 0.008700Rockwell C58DIN 6325-m6, ISO 8734250000000000000
    300.002 to 0.008Not RatedRockwell C52DIN 6325-m6, ISO 8734250000000000000
    320.002 to 0.008700Rockwell C58DIN 6325-m6, ISO 87342500000000000000
    340.002 to 0.008Not RatedRockwell C52DIN 6325-m6, ISO 873410000000000000
    360.002 to 0.008700Rockwell C58DIN 6325-m6, ISO 8734100000000000000
    380.002 to 0.008Not RatedRockwell C52DIN 6325-m6, ISO 873410000000000000
    400.002 to 0.008700Rockwell C58DIN 6325-m6, ISO 8734100000000000000
    450.002 to 0.008Not RatedRockwell C52DIN 6325-m6, ISO 873410000000000000
    500.002 to 0.008700Rockwell C58DIN 6325-m6, ISO 8734100000000000000
     
    Corrosion-Resistant Stainless Steel
    Image of Product. Front orientation. Dowel Pins. Standard Tolerance, Plain Head.
    18-8 Stainless Steel—The choice for wet and outdoor environments. In addition to resisting rust, these pins also withstand mild chemicals such as cleaners and degreasers. They are strong enough to join most components but won't withstand extreme stress and vibration as well as steel.
    Highly Corrosion-Resistant 316 Stainless Steel—Our most corrosion-resistant pins, these hold up in just about any environment. They won't degrade from exposure to weather, salt water, and most chemicals. Like 18-8 stainless steel, they're strong enough to join most components but won't withstand stress and vibration as well as steel.
    High-Strength Machinable 416 Stainless Steel—These pins hold their shape under stress and friction from moving parts. In addition to being the strongest stainless steel alloy, 416 is also the most machinable, so you can shape these pins to fit your hole. However, they are the least corrosion-resistant stainless steel option.
    Lg.,
    mm
    Dia. Tolerance,
    mm
    Double Shear Breaking
    Strength
    Min.
    Hardness
    Specs. Met
    Pkg.
    Qty.
    Pkg.
    18-8 Stainless Steel
     
    2 mm Diameter
    40.002 to 0.008Not RatedNot RatedISO 2338-m6100000000000000000
    50.002 to 0.008Not RatedNot RatedISO 2338-m610000000000000000
    60.002 to 0.008Not RatedNot RatedISO 2338-m610000000000000000
    70.002 to 0.008Not RatedNot RatedISO 2338-m650000000000000
    80.002 to 0.008Not RatedNot RatedISO 2338-m610000000000000000
    90.002 to 0.008Not RatedNot RatedISO 2338-m650000000000000
    100.002 to 0.008Not RatedNot RatedISO 2338-m610000000000000000
    120.002 to 0.008Not RatedNot RatedISO 2338-m610000000000000000
    140.002 to 0.008Not RatedNot RatedISO 2338-m610000000000000000
    200.002 to 0.008Not RatedNot RatedISO 2338-m65000000000000000
    220.002 to 0.008Not RatedNot RatedISO 2338-m6500000000000000
    240.002 to 0.008Not RatedNot RatedISO 2338-m65000000000000000
    280.002 to 0.008Not RatedNot RatedISO 2338-m6500000000000000
    300.002 to 0.008Not RatedNot RatedISO 2338-m6500000000000000
    320.002 to 0.008Not RatedNot RatedISO 2338-m610000000000000
    340.002 to 0.008Not RatedNot RatedISO 2338-m610000000000000
    360.002 to 0.008Not RatedNot RatedISO 2338-m610000000000000
    380.002 to 0.008Not RatedNot RatedISO 2338-m610000000000000
    400.002 to 0.008Not RatedNot RatedISO 2338-m610000000000000
    450.002 to 0.008Not RatedNot RatedISO 2338-m610000000000000
    500.002 to 0.008Not RatedNot RatedISO 2338-m610000000000000
     
    Highly Corrosion-Resistant 316 Stainless Steel
     
    2 mm Diameter
    40 to 0.008Not RatedNot RatedISO 2338-m6250000000000000
    50 to 0.008Not RatedNot RatedISO 2338-m6250000000000000
    60.002 to 0.008Not RatedNot RatedISO 2338-m6250000000000000
    80.002 to 0.008Not RatedNot RatedISO 2338-m6250000000000000
    90.002 to 0.008Not RatedNot RatedISO 2338-m650000000000000
    100.002 to 0.008Not RatedNot RatedISO 2338-m6250000000000000
    120.002 to 0.008Not RatedNot RatedISO 2338-m6250000000000000
    140.002 to 0.008Not RatedNot RatedISO 2338-m6250000000000000
    160.002 to 0.008Not RatedNot RatedISO 2338-m6250000000000000
    180.002 to 0.008Not RatedNot RatedISO 2338-m6250000000000000
    200.002 to 0.008Not RatedNot RatedISO 2338-m6250000000000000
    220.002 to 0.008Not RatedNot RatedISO 2338-m650000000000000
    240 to 0.008Not RatedNot RatedISO 2338-m62500000000000000
    260.002 to 0.008Not RatedNot RatedISO 2338-m650000000000000
    280 to 0.008Not RatedNot RatedISO 2338-m62500000000000000
    300.002 to 0.008Not RatedNot RatedISO 2338-m610000000000000
     
    High-Strength Machinable 416 Stainless Steel
     
    2 mm Diameter
    60.002 to 0.009Not RatedRockwell C36—50000000000000
    80.002 to 0.009Not RatedRockwell C36—50000000000000
    100.002 to 0.009Not RatedRockwell C36—50000000000000
    120.002 to 0.009Not RatedRockwell C36—50000000000000
    140.002 to 0.009Not RatedRockwell C36—50000000000000
    200.002 to 0.009Not RatedRockwell C36—500000000000000
    240.002 to 0.009Not RatedRockwell C36—500000000000000
     
    Corrosion-Resistant Stainless Steel with Material Certificate
    Image of Product. Front orientation. Dowel Pins. Standard Tolerance, Plain Head.
    Pins include a report with a traceable lot number and a description of their chemical, physical, and mechanical properties.
    18-8 Stainless Steel—The choice for wet and outdoor environments. In addition to resisting rust, these pins also withstand mild chemicals such as cleaners and degreasers. They are strong enough to join most components but won't withstand extreme stress and vibration as well as steel.
    Highly Corrosion-Resistant 316 Stainless Steel—Our most corrosion-resistant pins, these hold up in just about any environment. They won't degrade from exposure to weather, salt water, and most chemicals. Like 18-8 stainless steel, they're strong enough to join most components but won't withstand stress and vibration as well as steel.
    High-Strength Machinable 416 Stainless Steel—These pins hold their shape under stress and friction from moving parts. In addition to being the strongest stainless steel alloy, 416 is also the most machinable, so you can shape these pins to fit your hole. However, they are the least corrosion-resistant stainless steel option.
    Material Certificate Icon
    Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
    Lg.,
    mm
    Dia. Tolerance,
    mm
    Double Shear Breaking
    Strength
    Min.
    Hardness
    Specs. Met
    Pkg.
    Qty.
    Pkg.
    18-8 Stainless Steel
     
    2 mm Diameter
    160.002 to 0.008Not RatedNot RatedISO 2338-m650000000000000000
    180.002 to 0.008Not RatedNot RatedISO 2338-m65000000000000000
    260.002 to 0.008Not RatedNot RatedISO 2338-m6500000000000000
     
    Highly Corrosion-Resistant 316 Stainless Steel
     
    2 mm Diameter
    70.002 to 0.008Not RatedNot RatedISO 2338-m650000000000000
     
    High-Strength Machinable 416 Stainless Steel
     
    2 mm Diameter
    50.002 to 0.009Not RatedRockwell C36—50000000000000
    160.002 to 0.009Not RatedRockwell C36—500000000000000
     

    Undersized Dowel Pins

    You don’t need to create precise holes for these pins when aligning parts you plan to bolt together. They have a slightly undersized diameter to slip into place without the need for special installation tools, like an arbor press. Undersized pins are also used for prototyping and positioning components you need to assemble and disassemble frequently.
    Steel
    Image of Product. Front orientation. Dowel Pins. Plain Head, Undersized Tolerance.
    Machinable 12L14 Carbon Steel—Made of 12L14 carbon steel, these pins are the easiest to machine, so you can shape them if they don't quite match your hole dimensions. Stronger than stainless steel but not quite as strong as alloy steel, they won't deform from stress and vibration. Pins perform best in dry environments since moisture will cause them to rust.
    Lg.,
    mm
    Dia. Tolerance,
    mm
    Double Shear Breaking
    Strength
    Min.
    Hardness
    Specs. Met
    Pkg.
    Qty.
    Pkg.
    Machinable 12L14 Carbon Steel
     
    2 mm Diameter
    4-0.014 to 0Not RatedRockwell B68ISO 2338-h810000000000000000
    6-0.014 to 0Not RatedRockwell B68ISO 2338-h81000000000000000
    8-0.014 to 0Not RatedRockwell B68ISO 2338-h81000000000000000
    10-0.014 to 0Not RatedRockwell B68ISO 2338-h81000000000000000
     
    Corrosion-Resistant Stainless Steel
    Image of Product. Front orientation. Dowel Pins. Plain Head, Undersized Tolerance.
    18-8 Stainless Steel—The choice for wet and outdoor environments. In addition to resisting rust, these pins also withstand mild chemicals such as cleaners and degreasers. They are strong enough to join most components but won't withstand extreme stress and vibration as well as steel.
    Lg.,
    mm
    Dia. Tolerance,
    mm
    Double Shear Breaking
    Strength
    Min.
    Hardness
    Specs. Met
    Pkg.
    Qty.
    Pkg.
    18-8 Stainless Steel
     
    2 mm Diameter
    4-0.014 to 0Not RatedRockwell B95ISO 2338-h8100000000000000000
    5-0.014 to 0Not RatedRockwell B95ISO 2338-h8500000000000000
    6-0.014 to 0Not RatedRockwell B95ISO 2338-h810000000000000000
    8-0.014 to 0Not RatedRockwell B95ISO 2338-h810000000000000000
    10-0.014 to 0Not RatedRockwell B95ISO 2338-h810000000000000000
    12-0.014 to 0Not RatedRockwell B95ISO 2338-h85000000000000000
    16-0.014 to 0Not RatedRockwell B95ISO 2338-h85000000000000000
     

    Captive Pins

    Image of Product. Front orientation. Captive Pins.
    Also known as pilot pins, use these pins to position, pivot, and align components. To install, punch or drill a hole in sheet metal, then use a punch and anvil or arbor press to clinch the head to the metal.
    Pins are passivated for added protection against corrosion and oxidation. The ends are chamfered for easy insertion.
    MPP PEM® Series—MPP PEM® Series pins work with most materials. Made of A286 stainless steel, they're our strongest captive pins, with corrosion resistance comparable to 18-8 stainless steel pins. They are nonmagnetic.
    Lg.,
    mm
    Dia. Tolerance,
    mm
    PEM® Series
    No.
    PEM® Part
    No.
    For Min.
    Panel Thk., mm
    Pkg.
    Qty.
    Pkg.
    A286 Stainless Steel
     
    2 mm Diameter
    4-0.038 to 0.038MPPMPP-2MM-40.52500000000000000
    5-0.038 to 0.038MPPMPP-2MM-50.52500000000000000
    6-0.038 to 0.038MPPMPP-2MM-60.52500000000000000
    8-0.038 to 0.038MPPMPP-2MM-80.52500000000000000
    10-0.038 to 0.038MPPMPP-2MM-100.52500000000000000
     

    Slotted Spring Pins

    Image of Product. Front orientation. Spring Pins. Slotted Spring Pins.
    Image of Product. End View. Side1 orientation. Spring Pins. Slotted Spring Pins.

    End View

    Squeeze these pins into holes and they expand slightly, creating tension to hold parts in place. They are often used as hinge pins and as fasteners for springs and power transmission components. An alternative to dowel pins, they're lighter in weight with a hollow center and don’t need a precise hole. Also known as roll pins.
    Spring Steel—These pins won't deform from stress and vibration. Although they're stronger than stainless steel, they're best for dry environments since moisture will cause them to rust.
    Corrosion-Resistant 18-8 Stainless Steel—The choice for wet and outdoor environments, these pins resist rusting. They are strong enough to join most components but won't withstand extreme stress and vibration as well as steel.
    Lg.,
    mm
    For Hole
    Dia., mm
    Wall Thk.,
    mm
    Double Shear Breaking
    Strength, lbf
    Min.
    Hardness
    Specs. Met
    Pkg.
    Qty.
    Pkg.
    Spring Steel
     
    2 mm Diameter
    420.2330Rockwell C42DIN 7346, ISO 1333750000000000000000
    42 to 2.10.4600Rockwell C42ISO 875220000000000000000
    520.2330Rockwell C42DIN 7346, ISO 133375000000000000000
    52 to 2.10.4600Rockwell C42ISO 875220000000000000000
    620.2330Rockwell C42DIN 7346, ISO 1333710000000000000000
    62 to 2.10.4600Rockwell C42ISO 875220000000000000000
    820.2330Rockwell C42DIN 7346, ISO 1333710000000000000000
    82 to 2.10.4600Rockwell C42ISO 875220000000000000000
    1020.2330Rockwell C42DIN 7346, ISO 1333710000000000000000
    102 to 2.10.4600Rockwell C42ISO 875220000000000000000
    1220.2330Rockwell C42DIN 7346, ISO 1333710000000000000000
    122 to 2.10.4600Rockwell C42ISO 875220000000000000000
    1420.2330Rockwell C42DIN 7346, ISO 133371000000000000000
    142 to 2.10.4600Rockwell C42ISO 875220000000000000000
    1620.2330Rockwell C42DIN 7346, ISO 1333710000000000000000
    162 to 2.10.4600Rockwell C42ISO 875220000000000000000
    1820.2330Rockwell C42DIN 7346, ISO 1333710000000000000000
    182 to 2.10.4600Rockwell C42ISO 875220000000000000000
    2020.2330Rockwell C42DIN 7346, ISO 133371000000000000000
    202 to 2.10.4600Rockwell C42ISO 875210000000000000000
    2220.2330Rockwell C42DIN 7346, ISO 13337500000000000000
    222 to 2.10.4600Rockwell C42ISO 87521000000000000000
    2420.2330Rockwell C42DIN 7346, ISO 1333710000000000000000
    242 to 2.10.4600Rockwell C42ISO 875210000000000000000
    3020.2330Rockwell C42DIN 7346, ISO 1333710000000000000000
    302 to 2.10.4600Rockwell C42ISO 875210000000000000000
     
    Corrosion-Resistant 18-8 Stainless Steel
     
    2 mm Diameter
    42 to 2.10.4Not RatedNot RatedISO 87521000000000000000
    52 to 2.10.4Not RatedNot RatedISO 87521000000000000000
    62 to 2.10.4Not RatedNot RatedDIN 1481, ISO 8752250000000000000
    82 to 2.10.4Not RatedNot RatedDIN 1481, ISO 8752250000000000000
    102 to 2.10.4Not RatedNot RatedDIN 1481, ISO 8752250000000000000
    122 to 2.10.4Not RatedNot RatedDIN 1481, ISO 8752250000000000000
    142 to 2.10.4Not RatedNot RatedDIN 1481, ISO 8752250000000000000
    162 to 2.10.4Not RatedNot RatedDIN 1481, ISO 8752250000000000000
    182 to 2.10.4Not RatedNot RatedDIN 1481, ISO 8752250000000000000
    202 to 2.10.4Not RatedNot RatedDIN 1481, ISO 8752250000000000000
    222 to 2.10.4Not RatedNot RatedISO 8752250000000000000
    242 to 2.10.4Not RatedNot RatedDIN 1481, ISO 8752250000000000000
    302 to 2.10.4Not RatedNot RatedDIN 1481, ISO 8752250000000000000
     

    Partially Grooved Dowel Pins

    The grooved section secures these pins while the smooth portion is free to act as a pivot or hinge. The grooves pinch shut when installed, creating tension to lock in place. They fit tighter than standard dowel pins and resist pulling from movement and vibration, even in imperfect holes.
    For the best fit, drill your hole slightly larger than the nominal diameter shown.
    Half Grooved
    Image of ProductInUse. Front orientation. Dowel Pins. Plain Head, Partially Grooved, Standard Tolerance, Half Grooved.
    Image of Product. Front orientation. Dowel Pins. Plain Head, Partially Grooved, Standard Tolerance, Half Grooved, Tapered Groove.

    Tapered Groove

    Image of Product. Front orientation. Dowel Pins. Plain Head, Partially Grooved, Standard Tolerance, Half Grooved, Reverse-Tapered Groove.

    Reverse-Tapered

    Groove

    The most versatile partially grooved pins, these are used in a range of applications, including as rod end linkages, stop pins, and locators. Also known as type H pins.
    Zinc-Plated Carbon Steel—These pins withstand occasional exposure to moisture. However, since friction from moving parts can wear away the finish, they're not ideal for wet environments. While not nearly as corrosion resistant as stainless steel, they are stronger and won’t deform under stress.
    Tapered Groove—Easier to install than pins with parallel grooves but less secure in high-vibration applications.
    Reverse-Tapered Groove—With grooves that narrow toward the end, these pins are the best for securing a stop or handle in a blind hole. They’re easier to insert than pins with parallel grooves but are less secure in high-vibration applications.
    Nominal,
    mm
    Max., mm
    Lg.,
    mm
    Dia.
    Dia.
    Tolerance
    Dia.
    Dia.
    Tolerance
    Groove Type
    Double Shear Breaking
    Strength, lbf
    Min.
    Hardness
    Groove
    Lg., mm
    Specs.
    Met
    Pkg.
    Qty.
    Pkg.
    Zinc-Plated Carbon Steel
     
    2 mm Diameter
    82-0.025 to 02.10 to 0.05Reverse Tapered600Rockwell B684ISO 87411000000000000000
    102-0.025 to 02.20 to 0.05Tapered600Rockwell B685ISO 8745100000000000000
    142-0.025 to 02.20 to 0.05Tapered600Rockwell B687ISO 8745100000000000000
     
    Center Grooved
    Image of ProductInUse. Front orientation. Dowel Pins. Plain Head, Partially Grooved, Standard Tolerance, Center Grooved.
    Image of Product. Front orientation. Dowel Pins. Plain Head, Partially Grooved, Standard Tolerance, Center Grooved, Parallel Groove.

    Parallel Groove

    These pins lock in the middle, leaving two smooth ends free. They're often used to create a T-handle, such as on a valve stem to open and close it by hand. Also known as type E pins.
    Zinc-Plated Carbon Steel—These pins withstand occasional exposure to moisture. However, since friction from moving parts can wear away the finish, they're not ideal for wet environments. While not nearly as corrosion resistant as stainless steel, they are stronger and won’t deform under stress.
    Parallel Groove—Fit tighter than pins with tapered grooves to stay in place under severe vibration. However, they require more force to insert.
    Nominal,
    mm
    Max., mm
    Lg.,
    mm
    Dia.
    Dia.
    Tolerance
    Dia.
    Dia.
    Tolerance
    Groove
    Type
    Double Shear Breaking
    Strength, lbf
    Min.
    Hardness
    Groove
    Lg., mm
    Specs.
    Met
    Pkg.
    Qty.
    Pkg.
    Zinc-Plated Carbon Steel
     
    2 mm Diameter
    122-0.025 to 02.10 to 0.05Parallel600Rockwell B684ISO 8742100000000000000
     

    Core Pins

    Image of Product. Front orientation. Core Pins. Core Pins.
    Mold plastic around these pins to form small holes, or use them to perforate parts. They have a flat head to fit into a counterbored hole. Pins can be machined to fit your application. They're precision-ground to tight tolerances.
    M2 High-Speed Tool SteelAbout M2 High-Speed Tool Steel
    M2 high-speed tool steel pins resist wear and stay sharp at high temperatures.
    Head,
    mm
    Each
    Dia.,
    mm
    Dia. Tolerance,
    mm
    Dia.
    Ht.
    Min.
    Hardness
    1-9
    10-99
    100-Up
    63 mm Long
    2.0000 to 0.00845Rockwell C60000000000000000000000000000
     

    Ejector Pins

    Image of Product. Front orientation. Ejector Pins. Ejector Pins.
    Also known as knockout and forged pins, use these pins to push parts out of molds. Pins are precision-ground to tight tolerances and hardened for strength and wear resistance. Machining is not recommended. Metric pins meet DIN 1530 specifications.
    M2 High-Speed Tool Steel
    M2 high-speed tool steel pins withstand high temperatures.
    Head,
    mm
    Dia.,
    mm
    Dia. Tolerance,
    mm
    Dia.
    Ht.
    Min.
    Hardness
    Each
     
    100 mm Long
    2.0000-0.008 to -0.00242Rockwell C6000000000000000
     
    125 mm Long
    2.0000-0.008 to -0.00242Rockwell C600000000000000
     
    160 mm Long
    2.0000-0.008 to -0.00242Rockwell C600000000000000
     
    200 mm Long
    2.0000-0.008 to -0.00242Rockwell C6000000000000000
     
    250 mm Long
    2.0000-0.008 to -0.00242Rockwell C6000000000000000
     
    Nitride-Coated H13 Tool Steel
    H13 tool steel pins resist rapid changes in temperature.
    Head,
    mm
    Dia.,
    mm
    Dia. Tolerance,
    mm
    Dia.
    Ht.
    Min.
    Hardness
    Each
     
    160 mm Long
    2.0000-0.008 to -0.00242Rockwell C4100000000000000
     
    250 mm Long
    2.0000-0.008 to -0.00242Rockwell C410000000000000
     
    315 mm Long
    2.0000-0.008 to -0.00242Rockwell C410000000000000
     

    Fully Grooved Dowel Pins

    With a tighter fit than standard dowel pins, these resist pulling from movement and vibration, even in imperfect holes. Three grooves pinch shut when installed, creating tension to lock in place. Also known as Type A pins.
    For the best fit, drill your hole slightly larger than the nominal diameter shown.
    Steel
    Image of Product. Front orientation. Dowel Pins. Standard Tolerance, Plain Head, Fully Grooved, Parallel Groove.
    Image of Product. Front orientation. Dowel Pins. Standard Tolerance, Plain Head, Fully Grooved, Tapered Groove.

    Parallel Groove

    Tapered Groove

    Zinc-Plated Carbon Steel—These pins withstand occasional exposure to moisture. However, since friction from moving parts can wear away the finish, they're not ideal for wet environments. While not nearly as corrosion resistant as stainless steel, they are stronger and won’t deform under stress.
    Parallel Groove—Fit tighter than pins with tapered grooves to stay in place under severe vibration. However, they require more force to insert.
    Tapered Groove—Easier to install than pins with parallel grooves but less secure in high-vibration applications.
    Nominal,
    mm
    Max., mm
    Lg.,
    mm
    Dia.
    Dia.
    Tolerance
    Dia.
    Dia.
    Tolerance
    Groove
    Type
    Double Shear Breaking
    Strength, lbf
    Min.
    Hardness
    Specs.
    Met
    Pkg.
    Qty.
    Pkg.
    Zinc-Plated Carbon Steel
     
    2 mm Diameter
    142-0.025 to 02.150 to 0.05Parallel600Rockwell B68ISO 8740100000000000000
    142-0.025 to 02.150 to 0.05Tapered600Rockwell B68ISO 874410000000000000
    162-0.025 to 02.150 to 0.05Parallel600Rockwell B68ISO 874010000000000000
     

    Coiled Spring Pins

    Image of Product. Front orientation. Spring Pins. Coiled Spring Pins.
    Image of Product. End View. Side1 orientation. Spring Pins. Coiled Spring Pins.

    End View

    The best spring pins for joining parts exposed to vibration and shock. They're often used in power transmission, automation, and other assemblies with constant motion and sudden starts and stops. Because of their spiral shape, they flex to conform to holes that aren’t perfectly round.
    Spring Steel—These pins won't deform from stress and vibration. Although they're stronger than stainless steel, they're best for dry environments since moisture will cause them to rust.
    Corrosion-Resistant 18-8 Stainless Steel—The choice for wet and outdoor environments, these pins resist rusting. They are strong enough to join most components but won't withstand extreme stress and vibration as well as steel.
    Lg.,
    mm
    For Hole
    Dia., mm
    Double Shear Breaking
    Strength, lbf
    Min.
    Hardness
    Specs. Met
    Pkg.
    Qty.
    Pkg.
    Spring Steel
     
    2 mm Diameter
    62.000 to 2.100550Rockwell C43ASME B18.8.3M, DIN 7343, ISO 87505000000000000000
    82.000 to 2.100550Rockwell C41DIN 7343, ISO 87505000000000000000
    102.000 to 2.100550Rockwell C43ISO 87505000000000000000
    122.000 to 2.100550Rockwell C41DIN 7343, ISO 8750500000000000000
    142.000 to 2.100550Rockwell C43ASME B18.8.3M, DIN 7343, ISO 8750500000000000000
    162.000 to 2.100550Rockwell C43ASME B18.8.3M, DIN 7343, ISO 8750500000000000000
    182.000 to 2.100550Rockwell C41DIN 7343, ISO 8750500000000000000
     
    Corrosion-Resistant 18-8 Stainless Steel
     
    2 mm Diameter
    62.000 to 2.100400Not RatedASME B18.8.3M, DIN 7343, ISO 87505000000000000000
    82.000 to 2.100400Not RatedDIN 7343, ISO 87505000000000000000
    102.000 to 2.100400Not RatedDIN 7343, ISO 87502500000000000000
    122.000 to 2.100400Not RatedDIN 7343, ISO 87502500000000000000
    182.000 to 2.100400Not RatedDIN 7343, ISO 87502500000000000000
     
    back to top